Wings BH462A Neckband Wireless Earphones
Pairing / Verbinden / Jumelage / Emparejar / Connessione
Mode 1: Auto
When turned on, the LED will flash red and blue alternately, indicating pairing mode. Ensure the device is within a range of less than 1 meter.
Power Control:
- ON/OFF: Press the power button to turn the earphones on or off.
Music Control / Musik / Musique / Música / Musica
- Play/Pause: Click the button once. [▶️]
- Next Track: Double-click the button. [⏭️]
- Siri (Standby/Music): Hold the button for 1 second. [?️]
Call Control / Anrufen / Appeler / Llamar / Chiamare
- Answer/End Call: Click the button once. [?]
- Redial: Double-click the button. (DE: Wahlwiederholung, FR: Rappel, ES: Remarcar, IT: Riproduzione)
- Mute (Call mode): Hold the button for 1 second. [?]
Charging / Aufladen / Charger / Carga / Caricare
Important: Please keep the charging port dry before charging.
The charging indicator shows a RED light while charging. The output is 5V.
Dual-point Connection / Dual-Punkt-Verbindung / Double-point de Connexion / Dual-punto de Conexión / Doppio-punto Connessione
Connect to two devices simultaneously:
- Turn on the Wings Bluetooth headphones. They will automatically enter pairing mode (LED flashes red and blue).
- Pair the headphones with Phone A successfully.
- Turn off the Bluetooth function on Phone A. The headphones will automatically re-enter pairing mode (LED flashes red and blue).
- Turn on the Bluetooth function on Phone B and select "Wings" to pair successfully.
- Turn on the Bluetooth function on Phone A again and select "Wings" to pair successfully.
- Both Phone A and Phone B are now connected to the Wings Bluetooth headphones.
Tips
Wire Retraction
To prolong the lifespan of the headset, please follow these steps for retracting the wire:
- Hold the wire with your hands.
- Press both Earbuds Retract Buttons with your forefingers.
- Slowly retract the wire.
- Press both Earbuds Retract Buttons again to allow the rest of the wire and earbuds to retract fully. [✔️]
