Pedrollo TRITUS-TX Submersible Pump with Grinder
Technical Data and Performance Curves
Performance Curves and Data
50 Hz Performance Data
| TYPE | POWER (P2) | m³/h | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3.6 | 4.8 | 5.4 | |
| kW | HP | Q m³/min | 0 | 10 | 20 | 30 | 40 | 60 | 80 | 90 | |
| Single-phase | 0.55 | 0.75 | H meters | 12.0 | 11.5 | 10.5 | 9.6 | 8.6 | 6.2 | 3.0 | 1.0 |
Q = Flow Rate | H = Total Manometric Head
Performance curve tolerances according to EN ISO 9906 Grade 3B.
[Performance curve chart showing flow rate (Q) vs. head (H) for the TRITUS-TX pump at 50 Hz. The curve starts at approximately 12m head and 0 l/min flow, decreasing to approximately 1m head at 90 l/min flow. The chart includes scales for Q in l/min and m³/h, and for H in meters, US g.p.m., and feet.]
Uses and Installations
The TRITUS-TX grinder pump is equipped with a high-resistance hardened stainless steel grinder that completely shreds solid bodies and fibers contained in domestic sewage and wastewater.
The TRITUS-TX electric pumps feature a compact, integrated vertical-sliding magnetic float switch that ensures total electrical safety and allows the pump to be used in very confined spaces (even in sumps as small as 220 mm side).
Execution
- Power cable length: 5 m
- Float switch
Operating Limits
- Submersion depth up to 5 m (with adequately long power cable)
- Liquid temperature up to +40°C and up to +90°C for brief intervals (up to a maximum of 3 minutes) for intermittent service.
- Emptying level from the bottom: down to 35 mm
Available on Request
- Power cable length: 10 m
- Other voltages or 60 Hz frequency
Patents - Trademarks - Models
- TRITUS® Registered trademark No. 013017181
Absorptions
| TYPE | VOLTAGE | ||||||||||
| Single-phase | 230 V | ||||||||||
| TRITUS-TX | 3.0 A |
Performance curve tolerances according to EN ISO 9906 Grade 3B.
CONSTRUCTION CHARACTERISTICS
| Item | Description | Material |
|---|---|---|
| 1 | Handle | Technopolymer |
| 2 | Pump body | Technopolymer with threaded discharge outlet ISO 228/1 |
| 3 | Base | Technopolymer |
| 4 | Diffuser | Technopolymer |
| 5 | Impeller | Noryl™ |
| 6 | Grinder | Hardened Stainless Steel AISI 440C |
| 7 | Motor casing | Stainless Steel AISI 304 |
| 8 | Motor cover | Stainless Steel AISI 304 |
| 9 | Motor shaft | Stainless Steel AISI 431 |
| 10 | Double shaft seal with interposed oil chamber Seal Shaft Materials STA-12R SIC Ø 12 mm Ceramic / Silicon Carbide / NBR Sealing ring Ø 12 x Ø 19 x H 5 mm |
|
| 11 | Capacitor | |
| 12 | Single-phase electric motor 230 V - 50 Hz with thermal overload protection incorporated in the winding. Continuous service S1, Class F, IP X8 | |
| 13 | Power cable | 5 meters, type "H07 RN-F" with Schuko plug |
| 14 | Vertical-sliding magnetic float switch (adjustable) | |
| 15 | Hose connection Ø 40 mm |
DIMENSIONS AND WEIGHTS
[Diagram showing dimensions (a, b, c, d, e, f, g, h, h1, t, p) and installation layout for the TRITUS-TX pump. Includes a table with specific dimensions in mm and weight in kg for the Monofase TRITUS-TX model.]
| TYPE | OUTLET | DIMENSIONS mm | kg | PALLETIZATION no. pumps |
|||||||||||||
| DN | a | b | c | f | h1 | h | d | e | g (adjustable) | t | p | ||||||
| Single-phase | 1 1/4" | 88 | 117 | 118 | 205 | 76 | 324 | 35 | 206 | 80 | 0 | 100 | 251 | 350 | 220 | 7.0 | 60 |
