Nikon MC-DC3 Remote Cord User's Manual

Introduction

Thank you for purchasing an MC-DC3 remote cord. This product is designed for use with Nikon mirrorless cameras equipped with a headphone/remote cord connector. The MC-DC3 allows for remote camera operation, ideal for close-up shots or situations where camera movement can cause blur. It also enables holding the shutter-release button for long exposures (bulb mode) and burst photography.

For Your Safety

To prevent property damage or injury, read the "For Your Safety" section thoroughly before using this product. Keep these instructions accessible for future reference.

WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.

General Warnings:

• Do not disassemble or modify the product. Avoid touching exposed internal parts after a fall or accident, as this could cause electric shock or injury.
• Keep the product dry and do not handle with wet hands. This can lead to fire or electric shock.
• Do not use in the presence of flammable dust or gas (e.g., propane, gasoline, aerosols), as this may cause explosion or fire.
• Keep out of reach of children. Small parts pose a choking hazard. Seek immediate medical attention if any part is swallowed.
• Avoid handling with bare hands in extreme temperatures to prevent burns or frostbite.

Notices for Customers in Europe

This symbol indicates that electrical and electronic equipment must be collected separately. For users in European countries: This product must be disposed of at an appropriate collection point and not with household waste. Separate collection and recycling help conserve natural resources and prevent negative environmental and health consequences from incorrect disposal. Contact your retailer or local waste management authorities for more information.

Parts of the MC-DC3

Refer to Figure 1:

• q: Shutter-release button
• w: Shutter-release button lock
• e: Cord
• r: Plug

Connecting the MC-DC3

The illustration shows connection to a Z50II camera.

1. Turn the camera off.
2. Open the cover protecting the camera's microphone and headphone/remote cord connectors.
3. Insert the remote cord plug into the camera's headphone/remote cord connector (as shown in Figure 2). Do not use force or insert at an angle.
4. Turn the camera on.

Using the MC-DC3

The shutter-release button on the MC-DC3 functions identically to the camera's shutter-release button, whether pressed halfway or fully. Refer to your camera's documentation for details. The camera's exposure display and other features will operate as usual when using the MC-DC3.

The shutter-release button can be locked in the fully pressed position by sliding the lock to the HOLD position (Figure 3). Slide it in the opposite direction to unlock.

Precautions for Use

• Connect the MC-DC3 only to the camera's headphone/remote cord connector. It will not function if connected to the external microphone input connector.
• Do not connect or disconnect the MC-DC3 while the camera is on to prevent malfunction.
• Ensure the plug is securely connected for trouble-free operation.
• Do not carry the camera by the MC-DC3 or subject the camera or cord to physical shocks while connected, as this may cause the cord to disconnect.

Specifications

Nikon reserves the right to change the appearance, specifications, and performance of this product at any time and without prior notice.