AVSLAVSL
User Manual for INFINITY models including: 150.467UK, 150.467UK Flying Strobe Moving Head, Flying Strobe Moving Head, Strobe Moving Head, Moving Head, Head
www.avsl.com 150.467UK User Manual Specifications: Power supply 110-240Vac, 50/60Hz (IEC) Power consumption 140W Fuse rating F5A LED power 500 x 0.2W-RGB strobe Modes Show mode, sound, master/slave, DMX512 DMX channels 12, 15 and 19CH Beam angle 70° Pan range 360° infinite
File Info : application/pdf, 8 Pages, 476.97KB
DocumentDocumentInfinity Flying Strobe Moving Head Item ref: 150.467UK User Manual Please read through this manual thoroughly before use, any damage caused by misuse of product will not be covered by warranty. A mesmerizing moving head comprising 2 panels of 250 bright RGB LEDs which combine with infinite Pan and tilt movement to provide room filling effects from any position. The unit can be operated on show mode, sound-to-light or by DMX and can be free standing or mounted to trussing using the supplied fixing bracket. Ideal as a feature light in bars, nightclubs and functions, the Infinity moving head offers endless possibilities. In the box: Infinity should arrive with you in a single carton in good condition. The carton should contain 1 x main unit with brackets, 1 x UK twist and lock mains lead and 1 x manual. Warning: To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use. Please do not open cover, contains high voltage. This product is not serviceable or repairable by the end user. Please refer to qualified personnel for service and repair. www.avsl.com 150.467UK User Manual Placement: · Use the included mounting brackets to fix to a stand or lighting truss. · Use secondary safety fixings if mounting overhead. · Keep away from damp or dusty environments. · Ensure adequate airflow around the fixture housings. · Ensure adequate access to controls and connections. · Do not aim LED output directly into line of sight, as this can result in eye injury. Cleaning: · Use a soft cloth with a neutral detergent to clean the casing as required. · Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups. · Do not use strong solvents for cleaning the unit. Rear panel and control: 1. 2. 3. 4. 5. 6. 9. 7. 10. 8. 11. 1. LCD display 2. Up button 3. Enter button 4. Menu button 5. Down button 6. Power switch www.avsl.com 7. Power input (twist and lock) 8. Power output (twist and lock) 9. DMX input 10. DMX output 11. Fuse 150.467UK User Manual Manual control menu: Press the "MENU" button to enter the settings menu. Press "UP" and "DOWN" buttons to navigate through various setting functions. Press "ENTER" button to confirm the desired setting: www.avsl.com 150.467UK User Manual DMX mode: Infinity can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct start address by using the "UP" and "DOWN" buttons and "ENTER". The A on the LED display will begin to flash once it's received the DMX signal from the controller. This unit has either 12, 15 or 19 DMX channels as indicated in the table below: 12 Channel: www.avsl.com 150.467UK User Manual 15 Channel: www.avsl.com 150.467UK User Manual 19 Channel: www.avsl.com 150.467UK User Manual Specifications: Power supply Power consumption Fuse rating LED power Modes DMX channels Beam angle Pan range Tilt range Connections Dimensions Weight 110-240Vac, 50/60Hz (IEC) 140W F5A 500 x 0.2W-RGB strobe Show mode, sound, master/slave, DMX512 12, 15 and 19CH 70° 360° infinite 360° infinite Power in/out (twist and lock), DMX in/out (3pin XLR) 180 x 270 x 540mm 7.85kg www.avsl.com 150.467UK User Manual Troubleshooting: No power (mains) No light output Unresponsive to DMX Overheating/Cutting out Check mains voltage is correct and outlet is switched on Check mains lead and fuse (if fuse continually blows, refer to your dealer) Check control panel mode settings Check DMX settings from controller (dimmer levels, blackout etc.) Check that unit is in DMX mode and ensure the A on the DMX address flashes to confirm it's receiving a DMX signal Check DMX controller is not set to black out Check DMX controller is on correct fixture/page Check master dimmer value Check correct DMX address is set Check DMX connection and leads Ensure adequate ventilation and unit is not too close to a heat source This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines. Errors and omissions excepted. Copyright© 2024 AVSL Group Ltd, Unit 2 Bridgewater Park, Taylor Road, Trafford Park, Manchester. M41 7JQ. AVSL (Europe) Ltd, Unit 3D North Point House, North Point Bus. Park, New Mallow Road, Cork, Ireland. www.avsl.com 150.467UK User Manual