Ascent Rechargeable Wireless Mouse

Read All Instructions Carefully Before Use and Keep This Manual

In the Box:

• EMO-AS25BK Ascent Wireless Optical Mouse & USB Nano Receiver (x1)
• AA Battery (x1)

Safety Precautions

• This product is NOT a toy; keep away from children and pets.
• Only use the device according to the instructions in this manual.
• Never use the device for anything other than its intended purpose.
• Do not open this product or attempt to repair the unit yourself if it is not working properly. Doing so risks fire, shock, or injury.
• When not in use, the device should be stored in a dry, cool location, away from sources of water or heat.
• Do not expose the device to extreme temperatures (heat or cold), open flames, humid or wet conditions.
• Do not submerge in water. Do not use in a location where the device could fall into liquid.
• Battery must be changed by an adult or under adult supervision.
• Do not short-circuit the battery. Insert the battery according to the polarity (+ with + and - with -). Only use recommended battery.
• If the product will not be used for a long period of time, remove the used batteries to prevent damage.
• Ensure the switch is in the off position when the product is not in use.
• Do not allow children to handle dead or exhausted batteries.
• Ensure that exhausted or dead batteries are disposed of in an environmentally correct manner.
• Once the shelf life of the product has expired, place it in a waste collection center for further treatment and recycling. Never throw it away. This contributes to the improvement and care of the environment.

Instructions

Installing the Battery

• Remove the battery compartment cover on the underneath of the mouse.
• Insert the battery according to the positive and negative markings.
• Place the battery compartment cover back onto the mouse.

Installing the USB Nano Receiver

• Remove the USB Nano Receiver from its storage slot on the underneath of the mouse.
• Insert the USB Nano Receiver into the USB port of a notebook or PC.
• The notebook or PC will identify the receiver automatically, and the wireless mouse will begin installation.
• The mouse will be ready for use when the installation is complete.

Using the Wireless Optical Mouse

• The mouse will enter sleeping mode automatically if inactive for a set amount of time and will reactivate once any key is pressed.
• Optical mice may have operating issues on glass, black, and reflective surfaces. For the best operation, please use a mouse pad.
• If using on a desktop PC, the distance from the workspace to the computer could cause connection issues to the receiver. A suggestion is to use an extended USB cable.

Antimicrobial Additive

• The top panel and buttons of the mouse are made with an antimicrobial additive, which prevents germs and bacteria from growing on the case.

Indicator Lights

• Charging: The red LED stays on; fully charged, and the red LED goes out.
• Bluetooth pairing: The blue light flashes rapidly. After pairing: Blue light goes out.
• No indicator light for 2.4G priority connection.

Technical Specifications

• Hardware Interface: USB (1.1/2.0)
• Operating System Compatibility: Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, Windows 2000, Windows ME, Windows 98 & Mac OS 8.6 and higher (Apply to USB)
• DPI Level: 800-1200-1600 DPI

FCC Information

Compliance Statement

• This device complies with Part 15 of the FCC Rules.
• Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment.
• Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FC [Made in China]