ViewSonic VG2748A-2K Quick Start Guide

Getting Started

Important Notes

• Warranty: The Limited Warranty may or may not be included in the packaging depending on your country or region. If not included, it can be found on the ViewSonic website.
• Connections: When connecting the display to an external device (PC, etc.), please use the included video cable and accessories and follow the instructions in this manual.
• Included Items: The standard of the included power accessory and video cable may differ depending on your country, region, or environment. Refer to the product page and user guide for details.

VESA Mount Compatibility

This monitor supports a 100 mm x 100 mm VESA compatible, UL certified wall mount. When installing, please follow the wall mount installation guide provided in the user manual. You will need four M4 x 10 mm screws.

Assembly Instructions

Follow these steps to assemble the monitor stand:

1. Attach the monitor base to the stand arm.
2. Secure the stand arm to the monitor.
3. (The diagrams illustrate the process of attaching the monitor base to the stand arm, followed by attaching the assembled stand to the monitor.)

Ergonomic Setup

For optimal viewing comfort and health, position the monitor:

• Viewing Distance: Approximately 50-70 cm (20-28 inches) from your eyes.
• Eye Level: The top of the screen should be at or slightly below your eye level.
• (The diagram shows a person sitting at a desk with the monitor positioned at the recommended distance and height for ergonomic viewing.)

Connecting Your Display

Connect the necessary cables to the ports on the back of the monitor:

• Power Cable: Connect to the monitor and a power outlet.
• Video Cable: Connect the appropriate video cable (e.g., HDMI, DisplayPort, USB-C) from your computer to the monitor.
• USB Devices: Connect any USB devices to the available USB ports on the monitor (if applicable).
• (The diagram shows the rear panel of the monitor with various ports labeled, such as Power Input, HDMI, DisplayPort, USB-A, and USB-C, with corresponding cables being connected.)

Support and Compliance

Customer Support

For inquiries about the product, please contact the ViewSonic Customer Support Center.

Compliance Information

This device complies with FCC Rules, Industry Canada regulations, and relevant European directives (EMC, Low Voltage, RoHS2). For detailed compliance statements, please refer to the full user manual or the ViewSonic website.

Technical Specifications

• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Operating Humidity: 20% to 80% RH (non-condensing)
• Altitude: 0 to 3,000 meters (0 to 9,842 feet)