About This Manual
This document provides instructions for upgrading the software on the SHARP PS-919 2.1 Party Speaker System. It details how to determine if your device requires an update and the steps involved in the upgrade process.
Update Eligibility and Contents
Does My Device Need an Updated Firmware?
Only devices with "V1" indicated on their serial number label will benefit from this new update. Devices with "V2" or a higher version on the serial number label do not require firmware updates.
What Changes Are Included in the Update?
The update includes general sound improvements for the PS-919 system.
Checking Your Device Version
To check your device's version, locate the product label, typically found at the bottom of the unit. The serial number format will indicate eligibility:
- Serial numbers starting with PS-919BKV01 or PS-919WHV01 are eligible for the update.
- Serial numbers starting with PS-919BKV02 or PS-919WHV02 are not eligible for this update.
Preparing the USB Flash Drive
Follow these steps to prepare your USB flash drive:
- Use an empty USB flash drive with a maximum capacity of 32GB, formatted as FAT32.
- Download the firmware file from the official SHARP consumer website: sharpconsumer.com/audio/ps919bk/. The file is named "PS-919 - Software update".
- Unzip the downloaded file and copy the extracted file (which should be named "app.bin") to the root directory of your USB flash drive. Ensure only this single file is present on the drive.
Upgrading the Firmware via USB
Perform the firmware upgrade using the following steps:
- Connect the unit to mains power and ensure it remains connected throughout the upgrade process.
- Verify that only the "app.bin" file is on the USB drive.
- Insert the USB flash drive containing the "app.bin" software file into the USB port located on the back of the unit, under the rubber protector.
- The unit will automatically start the upgrade process once the USB is inserted.
- After approximately 3 seconds, a prompt tone will sound, and the unit will power off automatically, indicating the upgrade is in progress.
- Once the update is successfully applied, safely remove the USB drive from the back of the device.
- The device is now ready for use with the updated software.
File Info : application/pdf, 4 Pages, 948.97KB
DocumentDocumentReferences
Adobe PDF Library 17.0 Adobe InDesign 18.0 (Windows)Related Documents
![]() |
Sharp PS-919 Software Upgrade Manual This manual provides instructions for upgrading the software on the Sharp PS-919 2.1 Party Speaker System. |
![]() |
SHARP HT-SBW320 UK Declaration of Conformity Official UK Declaration of Conformity for the SHARP HT-SBW320 Soundbar Home Theatre System, confirming compliance with UK regulations and standards. |
![]() |
SHARP HT-SB121/HT-SB123 UK Declaration of Conformity - Soundbar Home Theatre System Official UK Declaration of Conformity for SHARP HT-SB121 and HT-SB123 Soundbar Home Theatre Systems, detailing compliance with relevant UK statutory requirements and standards. |
![]() |
SHARP Soundbar Home Theatre System UK Declaration of Conformity Official UK Declaration of Conformity for SHARP Soundbar Home Theatre Systems, including models HT-SB120, HT-SB121, and HT-SB123, detailing compliance with relevant UK and EU regulations and standards. |
![]() |
Sharp Tivo TV Declaration of Compliance - EU Data Act Official Declaration of Compliance for the Sharp Tivo TV LCD LED TV, confirming conformity with the EU Data Act (EU) 2023/2854, issued by Sharp Consumer Electronics Poland sp. z o.o. |
![]() |
Sharp CP-SS30 / CP-SS31 Quick Start Guide Get started with your Sharp CP-SS30 and CP-SS31 bookshelf speakers. This quick start guide provides essential setup information, features, and usage tips for enhanced audio enjoyment. |
![]() |
SHARP LCD LED TV Declaration of Compliance - EU Data Act Official Declaration of Compliance from SHARP for their LCD LED TV (Sharp Google TV) regarding the EU Data Act (EU) 2023/2854. |
![]() |
Sharp XL-B520D(BK) / XL-B720D(BK) Software Upgrade Manual This manual provides instructions for upgrading the firmware on Sharp XL-B520D(BK) and XL-B720D(BK) audio systems. It covers checking for updates, preparing a USB drive, and the upgrade process. |