JOWAVE BH830 Bluetooth Headset

WELCOME

Thank you for choosing JOWAVE BH830 Stereo Single Bluetooth Headset. Please read below instructions carefully before use. It will help you set up and operate this product properly and enjoy the advanced features.

PACKING LIST

• Bluetooth Headset *1: An illustration of the JOWAVE BH830 Bluetooth headset, designed to be worn over the ear.
• S/M/L Eartip *1: Three different sizes (Small, Medium, Large) of silicone ear tips for fitting the headset.
• M Sponge Earplug *1: A medium-sized earplug made of sponge material.
• Charging Cable *1: A USB to Type-C charging cable.
• 1 x Storage Case: A compact case for storing the headset and accessories.
• User Manual *1: A small booklet labeled "BH830 User Manual".

DETAILED DESCRIPTION

Headset Diagram: An illustration of the JOWAVE BH830 headset showing its components: Volume + button, Volume - button, Mute Button, Light Indicator, Charging Port, Dual-Mic system, Multi-function Button (MFB) which also acts as the Power Button, and the rotatable Earplug. The earplug is shown with adjustable angles indicated by 180° and 270°.

RESET THE HEADSET

In the power-on state, press and hold the "-" button and the power button at the same time for 5 seconds. The red and blue lights will flash 2 times. Reset finished.

HOW TO TURN ON THE HEADSET

1. Take out the headset from the box, press the MFB button for 2 seconds, it will turn on and with a voice prompt "power on";
2. The light will flash in blue;
3. Continue to press the MFB button for 5 seconds; it will enter pairing status, and the voice prompt "Pairing".
4. When entering pairing status, the light will flash red and blue alternately. (Press the MFB button for 5 seconds to turn off the headset). It will automatically shut down in 5 minutes when there is no connection in the power-on state.

HOW TO CONNECT WITH YOUR BLUETOOTH DEVICE

1. Turn on the headset and enter the pairing function.
2. Activate your device's Bluetooth function: Settings -> Bluetooth -> Activate.
3. Search for the Bluetooth item and find your headset "BH830". Click "BH830" to connect. There will be a voice prompt "Connected".

Phone Screen: A smartphone screen displaying Bluetooth settings. The available devices list shows "BH830" as a found device, with a "Connected" status indicated.

INCOMING CALL

Answer/end the call: Press the MFB button once. ?

Reject the call: Press the MFB button twice. ?

REDIAL THE LAST CALL

Press the MFB button twice under the standby mode to redial the last call. ?

MUSIC

Play/Pause: Into your music, and then you can press the MFB button to play/pause the music. ▶️/⏸️

Previous/Next Song:

• Previous: Long press the "-" button for 1.5 seconds. ⏪
• Next Song: Long press the "+" button for 1.5 seconds. ⏩

Siri: Long press the MFB button for 2 seconds to activate Siri voice assistant. ?️

VOLUME+/-:

• Volume +: Press the "+" button. ➕
• Volume -: Press the "-" button. ➖

HOW TO CHARGING THE HEADSET

Plug the Type-C cable into the headset charging port. ?

Indicator: The light will be red when charging ? and turn blue when fully charged ?.

TROUBLESHOOTING

1. The headset cannot be connected to the Bluetooth device

How to fix it:

• Confirm the status of the Bluetooth function.
• Turn off the Bluetooth function of your device, delete the historical connection and pairing again.
• Or please try to connect other accessories device.

2. The headset can not be charged

How to fix it: Replace a new charging cable.

3. The headset does not respond

How to fix it: Turn off the headset and turn it on again, then try to connect with your Bluetooth device.

4. The headset have no sound

How to fix it:

1. Check whether the audio track is played via the smartphone application.
2. Check the headset battery whether it has run out of.
3. Increase the volume of headset and mobile devices (or music playback applications).
4. Make sure that the correct mobile device is connected.
5. Please try to connect to other mobile devices.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
3. Consult the dealer or an experienced radio/TV technician for help.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Warning

1. Do not place the device in very low or high temperature environments. In extreme temperature environments, the headset may transform, battery capacity may decrease, and headset lifetime may be shortened.
2. Do not use the headset in a storm. The headset may be broken and will increase the risk of lightning stroke.
3. Do not disassemble or refit the headset for any reason, as it may cause damage. Please send it to a sales agency for repair.
4. Repeated charging and discharging will make the battery performance reduced after some time; this is normal for all rechargeable batteries.
5. Please put the items and accessories in places that cannot be touched by kids or pets to avoid any unexpected accidents.

No matter if the product is lost, outdated, broken, or you just don't like it, please contact our customer service. We will do our best to give you a satisfactory answer.

PRODUCT FEATURE

C&E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
Email: info@ce-connection.de

EC REP FC CE RoHS Made in China