User Guide for Smart-AVI models including: RKT16-HDX100, RKT16-HDX100 Rack 16 Port HDMI Extender, Rack 16 Port HDMI Extender, 16 Port HDMI Extender, HDMI Extender, Extender
RKT16-HDX100 - SmartAVI
4 hours ago — Quick Start Guide. 1. Page 2. OVEVIEW. The RKT16-HDX100 is the perfect solution for extending. HDMI signals to a remote location up to 150 feet away. It is the ...
il y a 16 heures — Quick Start Guide. 1. Page 2. OVEVIEW. The RKT16-HDX100 is the perfect solution for extending. HDMI signals to a remote location up to 150 feet away. It is the ...
File Info : application/pdf, 2 Pages, 549.39KB
DocumentDocumentTECHNICAL SPECIFICATION VIDEO Format Maximum Pixel Clock Inputs Local Outputs Remote Outputs Resolution DDC Input Equalization Cable Length OTHER Power Internal Dimensions Weight Operating Temp. Storage Temp. Humidity HDMI 165MHz (16) HDMI (16) HDMI (16) RJ-45 Up to 1920 x 1200 @60Hz or 480p/720i/720p/1080i/1080p 5 volts p-p(TTL) Automatic Up to 20 ft 110-240 VAC 17" W x 3.5" H x 3.25" D 10 lbs 0-55 °C (32-131°F) -20-85 °C (-4-185 °F) Up to 95% WHAT'S IN THE BOX PART NO. Q-TY DESCRIPTION RKT16-HDX100 1 16-port HDMI Rack Mountable Transmitter Power Cord 1 CCPWR06 Quick Start Guide 1 NOTICE The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc. RKT16-HDX100 Rack 16-Port HDMI Extender 800.AVI.2131, 702.800.0005 2455 W Cheyenne Ave, Suite 112 North Las Vegas, NV 89032 SmartAVI.com CONSOLIDATE SIXTEEN HDMI EXTENDERS IN ONE RACK UNIT TO TRANSMITHD SIGNALS UP TO 150 FEET USING INEXPENSIVE CAT5E/6 (STP) Quick Start Guide OVEVIEW The RKT16-HDX100 is the perfect solution for extending HDMI signals to a remote location up to 150 feet away. It is the ideal way to consolidate up to sixteen workstation computers into one location. It is fully compatible with MAC, PC and LINUX HDMI standards. Up to sixteen displays can be extended easily from a rack without the mess or expense of multiple extenders. Rather than buy multiple extenders for rack components, and having to find power strips or numerous power outlets for the adapters, the SmartAVI rack series of extenders allows for up to sixteen inputs and sixteen outputs and one power supply. FEATURES · Supports up to 16 HDMI sources · Supports High Resolution 1920x1200 60Hz WUXGA · Extends up to 150 feet with Cat5e/6 STP cables · Zero pixel loss with TMDS signal correction · DDC from internal table · Compatible with all operating systems · Local HDMI output for each port · HDMI 1.3 and HDCP compliance · Compatible with all major DVD players · Rack Mountable Solution · Data recovery for digital video · Plug-and-play ready · Uncompressed Video HARDWARE INSTALLATION 1. Power off the HDMI source and display. 2. Connect an HDMI cable from the HDMI source to the HDMI IN port of the RKT16-HDX100 transmitter. 3. Optionally connect an HDMI cable from the HDMI OUT port of the RKT16-HDX100 transmitter to the local HDMI display. 4. Connect the RKT16-HDX100 transmitter to the HDX-RX100 receiver using a CAT5e/6 cable (up to 150ft). 5. Connect an HDMI cable from the HDMI OUT port on the HDX-RX100 receiver to the HDMI display 6. Connect the power on the RKT16-HDX100 transmitter plugging in their power adapters (12VDC2A) or provide 12VDC input from the rear DC input port. NOTE: If the RX side has connected DC adapter, TX can get the DC power over the CAT5e/CAT6 cable, so leave DC input port empty. Only 1 power supply is required for both units. (In certain cases, if the receiver has too much drop off power, we recommend to connect a 12V DC power supply to each receiver 7. Power on the HDMI source, displays and speakers. The RX will read the EDID from the monitor, and then pass the data into the TX automatically. INTALLATION NOTE: Do not stack receiver units. Stacking inhibits heat distribution. HDMI IN HDMI OUT (Local) HDMI OUT CAT5/6 HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX RKT16-HDX100 HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX RKT16-HDX100 FRONT RKT16-HDX100 BACK