LG Digital Signage

Introduction

Please read this manual carefully before operating your set and retain it for future reference.

Included Accessories

• A: Main Signage Unit (Diagram shows a rectangular display unit).
• B: Power Cable (Diagram shows a standard power cord).
• C: Remote Control with Batteries (Diagram shows a remote and two AAA batteries).
• D: Data Cable 1 (Diagram shows a cable with specific connectors).
• E: Power Cable (Diagram shows a power cord, possibly different from B).
• F: Data Cable 2 (Diagram shows a cable with specific connectors).
• G: Audio Cable (Diagram shows a cable with 3.5mm audio jacks).
• H: Data Cable 3 (Diagram shows a cable with specific connectors).
• I: Daisy-chain/Distribution Cables (Diagram shows multiple cables bundled together).
• J: Screws (M3 x L3.5) - Quantity: 10.
• K: Mounting Bracket/Bar.
• L: Mounting Clips/Brackets - Quantity: 2.
• M: Bolts (M4 x L22) - Quantity: 12.
• N: Nuts - Quantity: 12.
• O: Mounting Brackets - Quantity: 2.
• P: Screws (M3 x L5.5) - Quantity: 8.
• Q: Cable Management Clips/Ties - Quantity: 4.

Important Safety Information

Handling Precautions:

• [!] Handle with care to avoid damage. (Diagram shows hands touching a screen with a warning symbol).
• [!] Do not drop the unit. (Diagram shows a unit falling and hitting a surface).
• [!] Avoid direct sunlight exposure. (Diagram shows a screen with sun rays and a prohibition symbol).
• [!] Do not stack units or place heavy objects on them. (Diagrams show stacked units and objects on top with prohibition symbols).
• [!] Avoid applying pressure or impact to the screen surface. (Diagrams show screen damage from pressure/impact).

Setup Steps

Step 1: Prepare the Display

[Screwdriver] Place the display unit flat on a protected surface. Attach the initial mounting bracket/bar (K) to the bottom edge of the display using screws (J).

Step 2: Cable Management

[!] Ensure cables are connected correctly. (Diagrams show correct and incorrect cable insertion and securing methods. Correct methods involve straight insertion and proper clip engagement. Incorrect methods show angled insertion or unsecured cables).

Step 3: Connecting Multiple Displays (If applicable)

[Screwdriver] Connect the numbered cables (1-4) to the corresponding ports on the display unit. Secure cables using provided clips.

Step 4: Attach Mounting Brackets

[Screwdriver] Attach mounting brackets (O) to the display unit using screws (J).

[!] Secure the brackets using bolts (M) and nuts (N).

Step 5: Prepare Media Player/Device

[Screwdriver] Prepare the external device (A), such as a media player.

Step 6: Mount Media Player

Position the device (A) for attachment to the display.

Step 7: Connect Device Cables

[Screwdriver] Connect the numbered cables (1-4) to the device (A). Use cable management clips (Q) to organize the cables.

Step 8: Secure Media Player

[Screwdriver] Secure the device (A) to the mounting brackets using screws (P).

Step 9: Final Cable Connections

[Screwdriver] Connect the audio cable (L) to the device (A).

Step 10: Power Connection

[Power Plug] Connect the power cable (B) to the AC-IN port on device (A) and then to a wall power outlet.

Step 11: Remote Control Setup and Power On

[Battery] Insert batteries into the remote control (C) by following steps 1-4 (opening the cover, inserting batteries correctly, closing the cover).

[Power Button] Press the power button on the remote control to turn on the display.

Resources

For more detailed information and manuals, visit:

www.lg.com/id-manual

For SuperSign software, visit: http://partner.lge.com