WISFOR LED Bathroom Mirror: Introduction and Installation Guide

01 Brand Introduction

WISFOR LED Bathroom Mirror, Make Life Easier

WISFOR is dedicated to simplifying busy lifestyles by offering quality bathroom products. These mirrors feature anti-fogging, dimmable lighting, and memory functions, designed to meet customer demands. Each mirror comes with a one-year warranty and is an ideal choice for bathrooms, bedrooms, and makeup rooms. WISFOR implements strict quality control to ensure products are safe and qualified.

For any issues upon receiving the mirror, customers are encouraged to contact WISFOR via email. Customer feedback, including comments and video reviews, is highly valued.

02 Product Introduction

Product Structure

The WISFOR LED Bathroom Mirror is available in Round, Oval, and Rectangle shapes. Each mirror includes:

• Touch Controls: Located on the mirror surface for operation.
• Power Line Plug: For connecting the mirror to a power source.
• Hanging Hook: For mounting the mirror.

Round Shape: Features three touch points (1, 2, 3) on the front. The back has the power line plug (4) and hanging hook (5).

Oval Shape: Similar to the round shape, with three touch points (1, 2, 3) on the front and power plug (4) and hanging hook (5) on the back.

Rectangle Shape: Also features three touch points (1, 2, 3) on the front, with power plug (4) and hanging hook (5) on the back.

02-1 Functions of Mirror

On/Off Button - Brightness control and adjustment

The primary touch button (labeled 1) functions as an On/Off switch. A short press turns the light on or off. A long press adjusts the brightness. The indicator light on the button shows its status: white when the light is on, and yellow when the light is off.

Light Change Button - adjust different lights

The light change button (labeled 2) allows users to cycle through different lighting colors. Pressing the button cycles between White, Warm White, and Warm light. This function requires the main On/Off button to be activated.

Visual examples show the mirror illuminated with White, Warm White, and Warm light.

Anti-Fog Button - defog the mirror

The anti-fog button (labeled 3) activates the defogging function. This feature can be used independently. It is recommended to turn off the anti-fog function when not in use to prevent damage to the defogging film. The anti-fog function operates at a constant temperature of 45°C.

02-2 Memory Function

For optimal touch operation, ensure the fingerprint covers the button area fully, avoiding use of just the fingertip. The mirror is equipped with a memory function. When the mirror is turned on again, it will retain the last used lighting color and brightness setting.

03 Parameter

Product Specifications:

04 Product Installation

Installation Precautions

When installing the bathroom mirror, it is recommended to first hold the mirror against the wall to determine the optimal installation height before marking and drilling.

Ensure your face is positioned in the middle of the mirror for the best viewing experience.

Recommended Height: A visual guide indicates the ideal height for mounting the mirror above a vanity, showing a person's relative height to the mirror.

04-1 Round / Oval Bathroom Mirror Installation

Tools to be prepared:

Tape Measure, Pencil, Drill, Hammer, Screwdriver, Screw Kit (Set).

Installation Steps:

1. Measure the best installation height using a tape measure.
2. Mark the wall with a pencil at the determined height.
3. Drill the marks on the wall using an electric drill.
4. Insert expansion rubber plugs into the drilled holes.
5. Drive screws into the expansion plugs.
6. Hang the bathroom mirror onto the installed screws.

04-2 Square Bathroom Mirror (Vertically/Horizontally) Installation

Tools to be prepared:

Tape Measure, Pencil, Drill, Hammer, Screwdriver, Screw Kit (Set).

Installation Steps:

1. Measure the distance required for the bathroom mirror hook.
2. Lift the bathroom mirror to confirm the best mounting height.
3. Mark the wall with a pencil.
4. Drill the marks with an electric drill. Drive a screw and an expansion plug into the hole.
5. Hang up the bathroom mirror.

Note: The square mirror can be hung vertically in a similar manner.

05 Wiring Method

Method 1: Power Plug

Extend the power line of the bathroom mirror from the grooves on the side and plug it into a power outlet.

A diagram illustrates the mirror connected to a standard power plug.

Method 2: Reserved Wire

This method involves hardwiring the mirror. Cut off the existing power plug of the bathroom mirror using scissors. Then, connect the mirror's wires to the reserved electrical wiring.

Diagrams show the process: cutting the plug, stripping wires, connecting wires (Live, Neutral, Earth), and insulating the connections with tape.

Method 3: Control the light with a wall switch

To control the mirror's light via a wall switch, cut off the mirror's plug and hardwire it directly to the wall switch wiring.

Diagrams illustrate the wiring connections for Live Wire, Neutral Wire, and Earth Wire for different regions: Australian, American, European, British, and Japanese. Note: Some configurations may not require an Earth Wire.

06 Warm Tips

1. When wiring, ensure compliance with electrical specifications and use waterproof tape for connections.
2. After using the defogging function, turn it off promptly to prevent damage to the defogging film.
3. The mirror's light strip and defogging film are replaceable components if they become damaged.

For any suggestions or advice, customers are welcome to contact WISFOR customer services via email.

07 Fault Isolation Manual

This section provides guidance for troubleshooting common issues: