User Guide for WyreStorm models including: APO-VX20-MNT, APO-VX20-UC, VX20 Series Display Mount, VX20 Series, Display Mount, Mount
VX20 Display Mount use with existi - Amber Tech
File Info : application/pdf, 4 Pages, 694.34KB
DocumentDocumentDisplay Mount for APO-VX20-UC APO-VX20-MNT Quickstart Guide WyreStorm recommends reading through this document in its entirety to become familiar with the product's features prior to starting the installation process. For other language versions of this document, check wyrestorm.com. Before You Begin · The weight of your Videobar SHOULD NOT EXCEED 26.5 LBS (12 KG). · You must verify that the total weight of your TV, Videobar, Videobar Mount and any accessories must be lower than the maximum weight rating of your TV mount. · You have read through the user manuals of your TV, Videobar and TV mount for additional guidance. · You have the tools needed for installation. IMPORTANT! Please read instructions carefully before installation · For wall mounted cases, the wall must be capable of supporting five times the weight of the TV, mount and sound bar combined. · Incorrect installation may result in product damage or body injury. WyreStorm bears no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse. · Do not apply this product to any purpose not indicated by its use outlined in this document. Measure Tape Bubble Level Screwdriver In the Box 2x Plastic Cover 2x Sliding Block 1x Allen Key 1x Horizontal Bar 2x Brackets 2x Adjustment Tablets 2x Hooks 4x M5x10mm Bolt 4x M5x8mm TV Screws 2x M6x8mm TV Screws 2x M6x30mm TV Screws 4x M6x16mm TV Screws 4x M6x25mm TV Screws 4x M8x25mm TV Screws 4x M8x45mm TV Screws 2x M4x16mm Videobar Screws 2x M6x16mm Videobar Screws 2x M5x16mm Videobar Screws 4x M8x10mm Spacer 4x M8x4mm Spacer 4x M8x2.5mm Spacer 6x M6 Washers WARNING:This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. Assemble Horizontal Bar 2x Plastic Cover 4x M5x10mm Bolt 1x Allen Key 2x Sliding Block 1x Horizontal Bar 1. Insert both of the Sliding Blocks into the Horizontal Bar at each end. 2. Use the Plastic Covers to cap off each end and secure tightly with the provided M5x10mm Bolts and Allen Key. 3. The sliding block position can be appropriately moved according to the length of your Videobar. Copyright © 2023 WyreStorm Technologies | wyrestorm.com APO-VX20-MNT Quickstart Guide | 230907 1 of 4 INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973) support@wyrestorm.com Further Assembly of Videobar Brackets 2x M4x16mm 4x M5x8mm 2x M5x16mm 2x M6x8mm 6x M6x16mm 4x M6x25mm 2x M6x30mm 4x M8x25mm 4x M8x45mm 4x M8x2.5mm 6x M6 Washer 4x M8x10mm 4x M8x4mm 2x Adjustment Tablet 2x Hook 2x Bracket 1. Check the horizontal distance of the TV before connecting the wall plate unit to the brackets. 2. Line the Brackets up with the corresponding holes of the Horizontal Bar and insert the Adjustment Tablets. 3. Secure the Adjustment Tablets tightly to the Brackets with the provided M5x8mm Bolts and Allen Key. Disassemble Your TV from the Mount 1. Make sure all cables are removed from the display before unmounting. 2. Unmount the display from the wall and put down on a soft surface. 3. Remove all current brackets from your display. Copyright © 2023 WyreStorm Technologies | wyrestorm.com APO-VX20-MNT Quickstart Guide | 230907 2 of 4 INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973) support@wyrestorm.com Attach the Assembled Sound Bar and Brackets Unit to Your TV IMPORTANT: Before you attach the bracket to the TV, check the vertical distance of the TV and wall plate to allow for the height of the Sound bar. 1. Align the Bracket with your display's mounting holes. 2. Use the supplied mounting screws, spacers and washers to mount the bracket to the display. Hang the Whole Assembled Unit to the Mount IMPORTANT: You can adjust the height and level of the display by tightening or loosening the adjustment screw. Copyright © 2023 WyreStorm Technologies | wyrestorm.com APO-VX20-MNT Quickstart Guide | 230907 3 of 4 INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973) support@wyrestorm.com Hang the Hooks 1. Ensure the Hooks are placed inside the Horizontal Bar and aligned with screw holes. 2. Secure the Hooks tightly to the Horizontal Bar with the provided M6x8mm Bolts and Allen Key. 3. .You can adjust the placement of the Hooks to make sure it fits to the Videobar. Install the Videobar 1. Unscrew the bolt holding the hook in place so you can extend it to fit under the Videobar. 2. Tighten the bolt back into the hook to secure it at the desired position for the Videobar. 3. Install the Videobar. You can adjust the hook to make sure the Videobar is secure. Note: The mounting kit can also be installed above the TV and the operation methods are similar to the instructions specified in this document. Warranty Information WyreStorm Technologies warrants that its products to be free from defects in material and workmanship under normal use for a period of five (5) years from the date of purchase. Refer to the Product Warranty page on wyrestorm.com for more details on our limited product warranty. Copyright © 2023 WyreStorm Technologies | wyrestorm.com APO-VX20-MNT Quickstart Guide | 230907 4 of 4 INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973) support@wyrestorm.com