2020 Hyundai KONA

Welcome to the Hyundai family!

This Getting Started Guide provides simple instructions to help you learn how to operate a few useful features so you can get started on your road to an incredible ownership experience. Thanks again for choosing Hyundai!

This guide is interactive for your convenience.

• Click on topics listed within the Table of Contents to jump to sections.
• Click on links in the Notes sections for additional information.
• Navigate back to the Table of Contents at any time.

Let's Get Started »

Connecting a Device: Phone Pairing

Follow these steps to pair your phone via Bluetooth:

1. Ensure the vehicle's shifter is in PARK. Press the SETUP button.
2. Press the BLUETOOTH® icon on the screen, then press BLUETOOTH CONNECTION.
3. Press ADD NEW. Turn on your phone's BLUETOOTH and select the device (Kona) found by your phone.
4. If prompted, enter the PASSKEY into your phone.
5. The vehicle will confirm that your phone has been successfully connected.
6. The vehicle will confirm that your contacts download is complete.
7. Select YES if you would like to set your phone as the priority device for Auto Connection.

Note: Bluetooth settings can be found in the SETTINGS app on most phones. Refer to your phone's owner's manual or visit HyundaiBluetooth.com for more information. The display, button, and/or icon locations may differ from the images shown.

Making a Call: Using Voice Commands

Before You Start: Make sure your phone has been paired and your contacts have been downloaded. If not, follow the instructions on the previous pages.

1. Press the PUSH TO TALK button located on the steering wheel. You will hear a beep.
2. After the beep, say the command "CALL" followed by the name of the desired contact. Example: "CALL JOHN SMITH".
3. Select the number you would like to call by saying "ONE" or "TWO".
4. The selected number will be dialed and your contact's name and phone number will appear on the screen.
5. To end the call, press the END CALL button located on the steering wheel.

Common Voice Commands:

• "HELP": Provides guidance on commands within the current function.
• "CALL [Contact Name]": Initiates a call to the specified contact.
• "DIAL [Phone Number]": Makes a call by dialing the spoken numbers.
• "PHONE": Provides guidance on phone-related commands.
• "CALL HISTORY": Displays the phone's call history screen.
• "CONTACTS": Displays the phone's contacts screen.

Note: Compatibility and performance may vary based on your phone, the phone's software, and your wireless carrier. The display, button, and/or icon locations may differ from the images shown.

Smartphone Connection: Setting Up Android Auto™/Apple CarPlay®

Android Auto and Apple CarPlay allow you to access the most commonly used smartphone features, including calling, navigation, text messaging, and playing music all from your driver's seat.

1. Connect a USB cable from your phone to the vehicle's USB data port. Notice the icon displayed on your screen.
2. Allow permission from your phone to connect to your vehicle.
3. Enjoy using the applications displayed on your vehicle's multimedia screen.

Note: Android Auto users will be prompted to view a tutorial. Select your option and proceed. *USB data port will typically be located in or near the front in-dash console. Check your vehicle's owner's manual for specific location. Apple CarPlay is a registered trademark of Apple Inc. Android Auto is a trademark of Google Inc.

To end a call using these features, press the END CALL button located on the steering wheel.

Navigation: Finding/Setting a Destination Using Voice Recognition

1. Press the PUSH TO TALK button located on the steering wheel. You will hear a beep.
2. After the beep, say a command. Example: "FIND COFFEE SHOP".
3. The results will be listed on the screen. Say the line item number to make your selection. Example: "THREE".
4. The destination route will be displayed on the screen and route guidance will begin.
5. Press the PUSH TO TALK button located on the steering wheel and say "CANCEL ROUTE" after the prompt to stop navigation guidance.

Note: The display, button, and/or icon locations may differ from the images shown.

Navigation: Finding/Setting a Destination Using the Search Box

1. The vehicle must be in PARK. Press the NAV button.
2. Touch the SEARCH box.
3. Enter the address of your destination and press OK when finished.
4. The route to your destination will be displayed on the screen. Select START GUIDANCE to begin your route.
5. Press the PUSH TO TALK button located on the steering wheel and say "CANCEL ROUTE" after the prompt to stop navigation guidance.

Note: The display, button, and/or icon locations may differ from the images shown.

Navigation: Common Voice Commands

To start voice command, press the PUSH TO TALK button located on the steering wheel.

Here are a few common voice commands to use after your phone has been paired:

• "HELP": Provides guidance on commands that can be used within the current function.
• "FIND <ADDRESS>": Searches for an address and sets it as a destination. Example: "300 (THREE-ZERO-ZERO) MAIN STREET, FOUNTAIN VALLEY."
• "FIND <POI>": Searches for the point of interest specified. Example: "FIND BANKS."
• "GO HOME/TO WORK": Sets the destination to your home or work/office. Your home or work address must be set in the navigation system.
• "CANCEL ROUTE": Cancels the route to the set destination and exits guidance.
• "POLICE STATION/HOSPITAL": Displays a list of the nearest police stations and hospitals.

Note: The system will search for addresses or destinations located within the state the vehicle is currently in. If you want to search in another state, say the name of the state first. Compatibility and performance may vary based on your phone, the phone's software, and your wireless carrier. The display, button, and/or icon locations may differ from the images shown.

BlueLink: Destination Search by Voice

1. Press the DESTINATION SEARCH BY VOICE button. When prompted, you can say the name of a Point of Interest (POI), an address, or a POI in a city. Example: "FIND COFFEE SHOP IN FOUNTAIN VALLEY, CALIFORNIA."
2. A list of nearby destinations matching your search criteria will be displayed. Say the line item number to make your selection. Example: Say "ONE" to select the first Starbucks listed.
3. The destination route will be displayed on the screen and route guidance will begin.

Note: Blue Link® subscription is required. To enroll, please visit your dealer or visit MyHyundai.com. All product names, trademarks, logos, and brands are property of their respective owners. All company, product, trademarks, and service names used herein are for illustrative purposes only. The display, button, and/or icon locations may differ from the images shown.

Custom Button: Initial Setup/Reassign Feature

The Custom Button ⚙️ can be used to quickly access your favorite feature with just the touch of a button.

Initial Setup

1. Press the CUSTOM BUTTON.
2. Select from the listed options to set as your custom button. For example, select PHONE.

Reassign Feature

1. Press and hold down the CUSTOM BUTTON for 2 to 3 seconds.
2. Select from the listed options to set as your custom button. For example, select HOME.

Note: The display, button, and/or icon locations may differ from the images shown. *Listed options may differ from the image shown.