Inside the Box
This product includes international power adapters to ensure compatibility worldwide.
Illustration of the Klipsch speaker and a power adapter with interchangeable international plugs.
Buttons
The top panel of the Klipsch GROOVEXL features the following controls:
- ? ON/OFF: Powers the device on or off.
- ? Bluetooth® Source Select: Used to select Bluetooth as the audio source.
- ➖ Volume Down: Decreases the audio volume.
- ➕ Volume Up: Increases the audio volume.
- Source Select: Allows selection of the audio source (e.g., Bluetooth).
Top view of the speaker showing ON/OFF (?), Bluetooth Source Select (?), Volume Down (➖), and Volume Up (➕) buttons.
Bluetooth® Wireless Technology
Connect your devices wirelessly using Bluetooth.
Pairing Process:
Hold 3 Seconds: Press and hold the power or Bluetooth button for approximately 3 seconds to initiate pairing mode.
Diagram 1: Finger pressing a button for 3 seconds.
Flashing Indicator: The Bluetooth indicator light will flash, signaling that the device is ready to pair.
Diagram 2: Flashing Bluetooth symbol (?).
Device Pairing: On your mobile device, navigate to Bluetooth settings. Select "Klipsch Groove XL" from the list of available devices. If prompted, confirm pairing.
Smartphone Bluetooth settings screens showing pairing status: 'Klipsch Groove XL [Not Paired]' and 'Klipsch Groove XL [Connected]'. A solid Bluetooth symbol (?) indicates connection.
Solid Indicator: Once successfully connected, the Bluetooth indicator light will be solid.
Note: Your device's interface may differ.
Battery Charge
The Klipsch GROOVEXL provides approximately 24 hours of playback on a full charge. Charging takes about 8 hours.
Diagram illustrating the battery charging process: the speaker connected to a power adapter, which is plugged into a wall socket. Estimated charging time is 8 hours for a 24-hour playback.
USB Audio
Play audio files directly from a USB storage device.
Supported Audio Formats:
| Format | Compatibility |
|---|---|
| MP3 | ✔️ Supported |
| WAV | ✔️ Supported |
| WMA | ❌ Not Supported |
| AIFF | ❌ Not Supported |
| AAC | ❌ Not Supported |
| FLAC | ❌ Not Supported |
Diagram of USB drive connection for audio. Audio format compatibility table: MP3 (✔️), WAV (✔️), WMA (❌), AIFF (❌), AAC (❌), FLAC (❌).
USB Charging
Charge the internal battery of the Klipsch GROOVEXL using the provided USB cable and a compatible power source.
Diagram of speaker charging via USB.
AUX IN
Connect external audio devices using a 3.5mm audio cable for playback.
Note: The 3.5mm audio cable is not included with this product.
Diagram of 3.5mm AUX cable connection. Note: 3.5mm cable not included.
Care and Cleaning
To maintain your Klipsch GROOVEXL speaker:
- Gently wipe the exterior with a soft, dry cloth.
- ⚠️ Warning: Do not spray cleaning liquids directly onto the device.
- ? Do not expose the speaker to liquids or immerse it in water.
- ? Avoid using electrical cleaning devices.
Illustration of cleaning the speaker with a cloth. Warning icons: [no spray], [no liquid], [no electrical contact].
Compliance Information
FCC Compliance (USA)
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Industry Canada Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
(French translation of compliance information is also present in the original document but merged into English for primary language output.)
