Tesla IR202VB Vertical Steam Iron
User Manual
Precautions
Before using this product, please read the instructions carefully and save them for future reference.
DANGER!
- Do not immerse in water or other liquid, nor rinse it under the tap.
- Be careful: Steam generated by the garment steamer can cause burns.
- Before connecting to the power supply, please check if the local supply voltage matches the product.
- If the plug, the cord, or the appliance itself shows visible damage, or if the product has been dropped or leaks, do not use the product again.
- The product can only be repaired by an authorized service center. Do not attempt repairs by any other persons, as this will invalidate the product's service guarantee.
- If the power cord is damaged, to avoid danger, it must be repaired by the manufacturer, a similar service, or a professional sector.
- When the product is powered on, the user must not leave it unattended.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Do not allow children to play with the product.
- When the product is powered on or cooling, the product and the power cord should be placed on a table that children under 8 years cannot reach.
- Care should be taken when using the appliance due to the emission of steam. Do not touch the steam head and hot surfaces during use. This product, during use, will produce high-temperature steam; do not direct it towards people and animals, and do not iron clothes while wearing them to avoid the risk of scalding.
- Before cleaning the product, installing, or removing the brush attachment, or filling the water tank, be sure to unplug the product.
NOTE
- Use only a grounded outlet.
- Do not use this product when the tank is empty.
- After ironing, be sure to disconnect the power plug and allow it to cool for 60 minutes before cleaning the product, installing or removing attachments, or emptying the water tank for storage.
- This product is intended for household use. Do not use this product in the bathroom or outdoors.
- Do not drag the product on the floor.
- It is recommended to use distilled water for this product to extend its using life.
- Do not put perfume, vinegar, descaling agents, ironing aids, or other chemicals into the tank, as this product is not suitable for the use of these chemicals.
Parts
The garment steamer consists of the following parts:
- A: Stainless steel panel
- B: Steam head panel
- C: Water tank connection part
- D: Water tank
- E: Pumping water accessory
- F: Rubber of upper cover
- G: Upper cover
- H: Lower cover
- I: Decoration part
- J: Adjustable button & rubber
- K: Switch
- L: Handle fix plate
- M: Upper handle cover
- N: Lower handle cover
- O: Cord guard
- P: Water tank bottom cover
Initial Use
- Remove any labels or protective covers. Place the unit upright before use and straighten the cord.
- The iron may emit a slight smoke and smell the first time it is used.
- To avoid a circuit overload, it is not recommended for use with other electrical circuits connected to the same socket.
- When you open the steamer packaging, check the list of all received materials and parts to avoid discarding any.
Before Ironing
The Garment Steamer is very easy to use, suitable for ironing wrinkles/folds of clothing, curtains, decorative fabrics, and refreshing. It can be used on most fabrics.
NOTE: The garment steamer is designed to avoid the use of hot-linked parts when the garment is in a horizontal position.
- Check that the fabric behind is breathable, so as not to gather steam in the fabric and wet the cloth.
- Check the laundry bag to ensure there are no items in the pockets.
- Check the back of the garment to see if there is any possibility of damage from steam.
- It is recommended not to use hot-linked metal parts in laundry around high-temperature steam, as it can cause metal parts to fade.
- When the switch is pressed, you will feel a vibration and simultaneously hear a faint buzzing sound. This is normal.
- Please keep the steam head plate between the cloth and maintain a distance of at least 5 cm.
Installation and Use
- Pull out the water tank, open the pressure cap, and fill the tank. Ensure the water tank is at least one-third full and does not exceed the maximum water level, then return it to the main unit.
- Hold the steamer handle with one hand and attach the brush attachment to the nozzle panel with the other.
- Connect the device to a power outlet. The power indicator light will turn on and blink. After heating for 25 seconds, the light will stop blinking. Then, select the steam mode and you can start using the product.
- The water tank can be replaced with a mineral water bottle with appropriate connections.
After Each Use
- When you stop using the product, press and hold the switch button for 4 seconds to turn off the appliance, then unplug the power cord from the power outlet.
- Remove the water tank and pour out any remaining water, ensuring it is empty.
- Place the product upright on a flat desktop and wait for it to cool down.
Care, Cleaning, and Storage
- Remove the brush head from the panel and clean it with a damp cloth.
- Do not use harsh or abrasive cleaners or solvents.
- Do not immerse the steamer in water or other liquids.
- Do not attempt to disassemble the appliance.
- Do not place the appliance near heat sources or in direct sunlight.
- Always ensure that the steam outlets are clean and free of fouling, and that steam flow is unobstructed.
- The handle can be folded for easy storage.
Technical Specification
- Model: IR202VB - Vertical Garment Steamer
- Power: 1600W
- Voltage: AC 220V - 240V~
- Frequency: 50Hz - 60Hz
Correct Disposal of this Product
This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.