Description
The MUD6 is a high-quality condenser microphone featuring an advanced A/D and USB interface, enabling instant digital recording without external interfaces or software drivers. It is compatible with Mac, Windows, and most Digital Audio Workstation (DAW) software, including GarageBand. The MUD6 provides premium audio recording with ease and mobility, and includes a pivoting stand mount and a 9.8 ft. (3-meter) USB cable, making it a valuable tool for any project studio.
Features
- Smooth, flat frequency response.
- Plug-and-play operation, no drivers required.
- Up to 16-bit / 48 kHz sampling rate.
- Powered by USB; no external power supply needed.
- Headphone output with volume control.
Specifications
| Type | Back Electret Condenser |
|---|---|
| Polar Pattern | Supercardioid |
| Frequency Response | 30-18,000 Hz |
| Sensitivity (at 1k Hz Open Circuit Voltage) | -38 dBV/Pa (12.6 mV) |
| Max. SPL | >135 dB SPL |
| Power Requirements | USB 5V, 30 mA |
| Resolution | Up to 16 bit/48k Hz sampling rate |
| Finish | Champagne silver |
| Connectors | USB B-TYPE, 1/8" (3.5mm) phone connector |
| Dimensions | Ø54 x 150 mm (Ø2.13" x 5.9") |
| Net Weight | 422 g (14.9 oz) |
*Note: Specifications are subject to change.
System Requirements
USB
USB 1.1 or 2.0, powered
RAM
64MB RAM (minimum)
Operating System
- Microsoft Windows 7
- Microsoft Windows 10
- Microsoft Windows 2000 Professional Edition
- Microsoft Windows XP Home / Professional Edition (service pack 1.0 or later, or use the USB audio driver update from Microsoft)
- Microsoft Windows Vista™ Business Edition
- Apple Computer Mac OS X 10.0 or later Edition
- Apple Computer Mac OS X 10.1 or later Edition
Furnished Accessories
- Threaded adapter
- Pivoting stand mount
- Pouch
- 3-meter cable
- Table stand
Function Description
The microphone is a cylindrical device with a grille at the top and a control knob on the body.
A USB Power Indicator
When lit, indicates the USB connection is active and the MUD6 is receiving power from the USB interface.
B Headphone Volume Control
A pop-out level control used to adjust the overall volume of the headphone output.
C Headphone Output Jack
A 1/8-inch (3.5mm) stereo jack for connecting headphones or studio monitors.
D USB connector
The MUD6 features a USB Type-B connector, allowing connection to a laptop via a USB Type-A port.
Installation
On a Table
Through the optional table stand HM6, the MUD6 can be placed on a table for recording.
On a Stand
By using a microphone stand, the MUD6 can be mounted for recording.
Connections USB Connector
A separate 3-meter cable with a USB Type-A connector allows connection to a computer's USB port.
*Notice: The included USB cable is for laptops with a Type-A connector. For computers with other connector types (e.g., Type-C), please use a connector adapter.
Quick Start
- Position the MUD6 on an optional stand using the included accessories.
- Ensure the grille net faces the sound source and the Perrycom logo and LED indicator are oriented towards the sound source.
- Plug the Type-B connector of the included USB cable into the USB socket on the bottom of the MUD6.
- Plug the other end of the USB cable into an available powered USB port on your computer.
*Notice: Be sure to check the USB audio device driver setup for Windows and Mac OS to confirm your computer has recognized the MUD6.
- Launch your DAW, turn down the main output level, and select the MUD6 for the input.
- Set up a mono record track in your DAW.
- Configure the MUD6's input level. This can be done via the Sound playback settings in Windows or the Sound dialog box in System Preferences on MAC OS.
- Adjust the microphone's input level in your DAW or system settings to approximately half way.
- Connect headphones to the MUD6's headphone output. Position the MUD6 towards the sound source and adjust the volume control until a comfortable listening level is achieved.
Now, follow the instructions of your DAW software to enable the track for recording, and you are ready to record.
*Notice: If the microphone level of MUD6 is too loud or not enough, please check your DAW software or refer to the Troubleshooting page in this manual to adjust the level in Windows and Mac computer systems.
USB Audio Equipment Driver
Windows Operating System
- Hit "Control Panel" >> Hit "Hardware and Sound".
- Navigate to Sound >> Hit "Manage audio devices".
- Hit the "Recording" tab, click "MUD6", then click "Set Default" to select MUD6 as the default microphone.
*Notice: If a green tick is already next to the MUD6 microphone symbol and the "Set Default" button is grayed out, the MUD6 has already been selected as the default device.
- Hit "Properties" >> navigate to the "Level" tab to adjust the microphone input gain.
Headphone Output Monitoring (Windows)
- To use the MUD6's headphone output jack for monitoring: Hit the "Playback" tab, click "MUD6", then click "Set Default" to select MUD6 as the default playback device.
*Notice: If a green tick is already next to the MUD6 speaker symbol and the "Set Default" button is grayed out, the MUD6 has already been selected as the default device.
- Hit "Properties" >> navigate to the "Level" tab to adjust the headphone output volume. Afterward, use the headphone volume knob on the MUD6 for real-time adjustment.
Mac OS Operating System
- Open the Sound Preference window from System Preferences. Select MUD6 from both the Input and Output tabs.
- For Garage Band users: Open Garage Band before plugging in the microphone to automatically select the USB device.
Using the Direct Monitor
- To turn direct monitoring on or off, open the Audio/MIDI Setup utility located in the Utility folder inside the Applications folder.
- Click the checkbox in the "Thru" column in Audio/MIDI Setup.
Troubleshooting
| Problem | Solution |
|---|---|
| No sound in headphones | Check the headphone volume control and microphone gain at the computer's control panel. |
| Microphone sound is too weak or distorted | Windows: Audio tab, click Volume under Record and turn up Microphone Gain Control. Mac: From System Preferences, Choose Sound, Select Input tab and turn up Input gain. |
| Headphones are not loud enough | Windows: Audio tab, click Volume under Sound playback and turn up Volume Control. Mac: From System Preferences, Choose Sound, Select Output tab and turn up Output volume. |
Limited Warranty
For compliance with the instructions in the user manual, Perrycom Enterprise provides a one-year warranty for all material and producing quality from the purchase date. This warranty term will adjust according to different countries or areas. Please contact a local distributor for more information. During the validity period, if there is any material defect, production quality issue, or any function unavailability, Perrycom will repair or replace the parts. This warranty is only valid for products sold by distributors or agents authorized by Perrycom. However, the following situations are excluded from the warranty: Damage caused by accident, abuse, improper instructions, self-modification and repair, or damage during transportation; non-compliance with the instructions in the manual; repair by a company not authorized by Perrycom Enterprise; requests by distributors without authorization; or if the serial number sticker on the Perrycom product is unidentified, modified, or removed. All repairs for Perrycom products must be accepted by an authorized repair center, distributor, or agent. Unauthorized repair, maintenance, and modification will void the warranty. Any warranty repair claim requires a sales receipt from an authorized distributor or agent to confirm the product is still within the warranty period. To obtain original authorized repair warranty service, please contact an authorized distributor, agent, or send an email to tony_chang@ksyola.com.
WARNING!
INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH IF MISHANDLED COULD RESULT IN DEATH OR SERIOUS PERSONAL INJURY OR PROPERTY DAMAGE.
- Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so may result in fire or electric shock.
- Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
- Do not subject to extreme force and do not pull on the cable, as it might cause product failures.
- Keep this product and the equipment used with it dry and avoid exposure to extreme high temperature and humidity.
Made in China
Contact
Marketing and sales
Perrycom
+886-15995670339