REACH- and RoHS - Declaration

We declare that all these CO2-Sensors supplied by Sensirion AG comply with:

• The EU regulation concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals, REACH (Reg. 1907/2006 /EC), i.e. the following limit values are not exceeded:
  • Substances of Very High Concerns (SVHC): 1000 ppm
  The information is based on data provided by our suppliers. No attempt has been made to verify this information by third party analysis.
• The EU regulation on the Restriction of Hazardous Substances in electrical and electronic equipment, RoHS (Reg. 2011/65/EU and the delegated directive 2015/863/EU), i.e. the following limit values are not exceeded:
  • Lead (Pb), Mercury (Hg), Hexavalent Chromium (CrVI): 1000 ppm
  • Cadmium (Cd): 100 ppm
  • Polybrominated biphenyls (PBB) and Polybrominated diphenyl ethers (PBDE): 1000 ppm
  • Phthalates: DEHP, BBP, DBP and DIBP: 1000 ppm
  • Copper Alloy: Compliant with exception 6(c) of the directive 2011/65/EU.
  • Resistors: Compliant with exception 7(c)-I of the directive 2011/65/EU
• The International Electrochemical Commission's (IEC) Definition of Halogen-Free IEC 61249-2-21, i.e. the following limit values are not exceeded:
  • maximum chlorine: 900 ppm
  • maximum bromine: 900 ppm
  • maximum total halogens (chlorine + bromine): 1500 ppm

Disclaimer: All information in this declaration is given to the best of our present knowledge and belief. The information given doesn't imply giving a warranty within the meaning of the warranty law.

[copyright] Sensirion AG