Compliance proofs for products: LANCOM Systems GmbH
User Guide for LANCOM models including: 1640E VPN Router, 1640E, VPN Router, Router
- LANCOM Systems GmbH
File Info : application/pdf, 1 Pages, 491.11KB
DocumentDocument0922 LED description & technical details owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their Hardware Quick Reference LANCOM 1640E WAN interface Connect the WAN interface to your WAN modem using the enclosed ethernet cable with the dark green connectors. Ethernet interface Use the cable with the kiwi-colored connectors to connect one of the interfaces ETH 1 to ETH 3 to your PC or a LAN switch. Configuration interface Configuring the device via the serial interface requires a serial configuration cable (available as an accessory). USB interface You can use the USB interface to connect a USB printer or a USB storage device. Reset button Pressed up to 5 seconds: device restart RESET Pressed until first flashing up of all LEDs: configuration reset and device restart Power When connecting the cable to the device, turn the bayonet connector 90° clockwise until it clicks into place. Use only the supplied power adapter. Mounting & connecting Power Online WAN ETH 1 ETH 2 ETH 3 VPN LANCOM 1640E Power Off Green, permanently* Red / green, blinking Red, blinking Red, blinking slowly 1x green inverse blinking* 2x green inverse blinking* 3x green inverse blinking* Device switched off Device operational, resp. device paired / claimed and LANCOM Management Cloud (LMC) accessible Configuration password not set. Without a configuration password, the configuration data in the device is unprotected. Hardware error Time or charge limit reached/error message occurred Connection to the LMC active, pairing OK, device not claimed Pairing error, resp. LMC activation code not available LMC not accessible, resp. communication error Online Off Green, blinking Green, permanently Red, permanently WAN connection inactive WAN connection is established (e.g. PPP negotiation) WAN connection active WAN connection error WAN Off Interface deactivated Orange, blinking Synchronization with the modem Orange, permanently Synchronization with the modem successful Green, permanently WAN connection established Green, flickering WAN data transmission Red / orange, blinking Hardware error, ext. modem ETH Off Green, permanently Green, flickering No link Network connection ready (link) Data transmission VPN Off Green, permanently Green, blinking No VPN connection active VPN connection active Establishing VPN connection Hardware Power supply 12 V DC, external power adapter (110 or 230 V) with bayonet connector to secure against disconnection Power consumption Max. 8.5 W Environment Temperature range 0 40 °C; humidity 0 95 %; non-condensing Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures 210 x 45 x 140 mm (W x H x D) Number of fans None; fanless design, no rotating parts, high MTBF Interfaces WAN ETH USB Serial Interface 10 / 100 / 1000 Mbps Gigabit Ethernet 3 individual 10 / 100 / 1000 Mbps Gigabit Ethernet ports; ex-factory operation as switch. One port configured as WAN port. The ports can be electrically disabled in the LCOS configuration and support energy saving functionality as per IEEE 802.3az. USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices (COM-port servers), or USB data media (FAT file system) Serial configuration interface / COM port (8-pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog / GPRS modems. Supports internal COM-port server and provides transparent asynchronous serial data transmission via TCP WAN protocols Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1, RIP-2, VLAN, IP Package content Cable Power adapter 2 Ethernet cables, 3m External power adapter 12 V / 2 A DC/S, barrel connector 2.1 / 5.5 mm bayonet, LANCOM item no. 111303 (not for WW devices) and/or omissions. Cloud-ready Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide! Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times. Please observe the following when setting up the device i The power plug of the device must be freely accessible. For devices to be operated on the desktop, please attach the adhesive rubber footpads Do not rest any objects on top of the device Keep all ventilation slots on the side of the device clear of obstruction In case of wall mounting, use the drilling template as supplied Rack installation with the optional LANCOM Rack Mount (separately available) Please note that support service for third-party accessories is excluded. *) The additional power LED statuses are displayed in 5-seconds rotation if the device is configured to be managed by the LANCOM Management Cloud. This product contains separate open-source software components which are subject to their own licenses, in particular the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device`s WEBconfig interface under "Extras > License information". If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request. Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc