Contact Us â Official VEVOR Support
User Manual for VEVOR models including: EEV0, PAV0, 4AV0, EEV0 Steel Wire Shelf, Steel Wire Shelf, Wire Shelf, Shelf
File Info : application/pdf, 12 Pages, 1.38MB
DocumentDocumentTechnical Support and E-Warranty Certificate www.vevor.com/support STEEL WIRE SHELF USER MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands. MODEL: EEV0 / PAV0 / 4AV0 STEEL WIRE SHELF -1- Warning - To reduce the risk of injury, user must read instructions manual carefully. This symbol, placed before a safety comment, indicates a kind of precaution, warning, or danger. Ignoring this warning may lead to an accident. To reduce the risk of injury, fire, or electrocution, please always follow the recommendation shown below. Warning- Be sure to wear gloves when using this product. 1) Keep this manual for the safety warnings and precautions. The manual offers important information on how to assemble, use and maintain this product. 2) Please handle metal edges carefully. 3) DO NOT stand on this product or use it as a ladder. 4) DO NOT alter this product in any manner that is not intended, as this may cause product damage or personal injury. 5) Always assemble on an even surface. 6) The maximum loaded weight for each shelf is no more than 180 kg, evenly distributed. 7) Store the heaviest items on lower shelves. 8) Attach the unit to the wall if filling to capacity (fittings not included). ASSEMBLY PRECAUTIONS 1. Please assemble the product in strict accordance with the instructions. Incorrect assembly could be hazardous. 2. Please wear safety goggles and work gloves properly during assembly. 3.Do not try to assemble the product when feeling tired or when under the influence of alcohol, drugs or medication. -2- 4.Load bearing capacity and other product parameters are applied to the properly and completely assembled product only. 5.A hammer and a pair of gloves may also be used, provided a cloth or wood block is placed between the hammer head and the parts. USE PRECAUTIONS 1.This product is not a toy. Do not allow children to play with or get access to this item. 2.Check carefully before use. Do not use if parts get loosened or damaged. 4.Use on flat, level, and hard surfaces only. 5.Do not exceed the listed load bearing capacity. Tighten all the knobs securely before placing weights on. Be aware of the dynamic load bearing capacity! Sudden load changes may temporarily cause excessive load, resulting in product failure. SAVE THESE INSTRUCTIONS SKU Model Product size Total load limit load limit for each layer 1 EEV0 16×36×71.4inch 2000lbs 400lbs 2 PAV0 24×48×71.4inch 2000lbs 400lbs 3 4AV0 24×60×77inch 2000lbs 400lbs -3- Part Description Picture A Steel mesh B Upright post Top shelf C short beam Top shelf D long beam EEV0 16×36×71.4 inch Part Qty PAV0 24×48×71.4 inch 5 5 4AV0 24×60×77 inch 5 8 8 8 10 10 10 10 10 10 E Fixings 4 4 4 F Post cap G Reinforcer Height of separated shelfs 16 16 16 0 5 10 35.7inch 35.7inch 38.5inch -4- Top shelf beam rivets has a design that allowing Steel mesh to sit. NB: Model number shown is 4AV0 Attention: For additional information regarding the parts listed below, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clear work area. Step 1: Post Cap Assembly 1. Slide each post (B) into post cap (F) as shown. 2. Repeat for all 4 upright posts. Attention: post caps for upright feet only. Top shelf beam rivets have a modified design, allowing Steel mesh to sit flush. -5- Step 2: Short and Long Beam Assembly 1. Align short beams (C) & top shelf long beam (D) to aligned notches between four upright posts (B). 2. Once in position, tap firmly using a rubber mallet. 3. Repeat process for opposite side, ensuring both ends are set at the same height. Step 3: Fixings Assembly 1· Fix fixings(E) at the top of the upright post(B), and tap down to the end. -6- Step 4: Install The Upright Post 1.The bottom of the upright post(B) is secured to each fixing(E), and tap down to the end. Step 5: Install the third, fourth and fifth top shelf long beam(D) and short beam(C); the installation method is the same as Step 2. -7- Step 6: Install the Reinforcer. 1. install part G on each part D. NB: Model number shown is EEV0 NB: Model number shown is PAV0 NB: Model number shown is 4AV0 Step 7:Steel Mesh Top Shelf Assembly 1.Insert steel mesh top shelf (A) on to the top shelf supports. 2. Ensure it sits flush with the top of the unit frame. -8- Step 8:Install The Top Glue Foot 1. Slide each post (B) into post cap (F) as shown. 2. Repeat for all 4 upright posts. 3. Assembly is now complete, and your unit is ready for use. Attention: this product can be separated with two shelf. You can find the height of each shelf in the table of part list. -9- Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 UK REP E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. EC REP C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX - 10 - Technical Support and E-Warranty Certificate www.vevor.com/support