QMark CHD Series Commercial High-Efficiency Ceiling Fan
Manufacturer: QMark (A Marley Engineered Products Brand)
Address: 470 Beauty Spot Rd. E, Bennettsville, SC 29512
Submittal Sheet
This document provides specifications and details for the QMark CHD Series Commercial High-Efficiency Ceiling Fan.
Job Information
Job Name: [Job Name]
Location: [Location]
Architect: [Architect]
Engineer: [Engineer]
Contractor: [Contractor]
Submitted By: [Submitted By]
Date: [Date]
Fan Specifications Table
| TAG/ITEM | QTY. | CATALOG NUMBER | VOLTS | AMPS | BLADE SWEEP | CFM | AREA COVERAGE |
|---|---|---|---|---|---|---|---|
| [TAG/ITEM] | [QTY.] | [CATALOG NUMBER] | [VOLTS] | [AMPS] | [BLADE SWEEP] | [CFM] | [AREA COVERAGE] |
Accessories and Controls
| TAG/ITEM | QTY. | CATALOG NUMBER | DESCRIPTION |
|---|---|---|---|
| [TAG/ITEM] | [QTY.] | [CATALOG NUMBER] | [DESCRIPTION] |
Approval Information
Submitted By: [Submitted By]
Date: [Date]
Approved By: [Approved By]
Date: [Date]
Architect's and Engineer's Specifications
Ceiling fans are to be furnished as specified. Fans are to be U.L. listed Standard 507 with matching U.L. listed solid state controls. All motors are to be direct-drive permanent split capacitor type, with permanently sealed ball bearings. All motors must have built-in, self-resetting (internal) thermal overload protector T19700.
All fans must have factory installed Secondary Support Cable Assembly connected to the motor shaft, with a minimum 6-foot galvanized cable (1/8" 7x7) with a rated breaking strength of 1700 lbs. and must comply with CSA std. C22.2 Sept. 1986.
Fan blades are to be straight with a rolled edge design for maximum efficiency. Fans installed with blade height less than 10' from the floor must have rolled edge blades with a minimum 3/8" thickness in compliance with U.L. 507. Fans are to be labeled in accordance with U.L. 507 "Mounted blade height to floor of 7 feet acceptable". Fans used with motor speed controls must be labeled in accordance with U.L. 507 "Suitable for use with solid state motor speed controls". K version models are sold with CTL12004RSPD reversible, wall-mounted motor speed controller.
*QMark reserves the right to change specifications without prior notice.
Models & Specifications
| CATALOG NO. | FAN ONLY | UPC | FAN TYPE | VOLTAGE | FAN & CONTROLLER KIT (WIDTH) | CFM/WATTS | CFM | WATTS | EYEC** |
|---|---|---|---|---|---|---|---|---|---|
| 36201K | 36201C | 685360173788 | High Efficiency | 120 | 36" | 64.0 / 33.2 | 2126 | 33.2 | $9.30 |
| 48201K | 48201C | 685360173801 | High Efficiency | 120 | 48" | 85.6 / 45.1 | 3861 | 45.1 | $12.60 |
| 56001LCCK* | 56001LCC* | 685360173702 | High Efficiency/Low Ceilings | 120 | 56" | 87.8 / 56.4 | 4952 | 56.4 | $15.80 |
| 56201CLSK* | 56201CLS* | 685360174556 | High Efficiency/Low Speed | 120 | 56" | 81.0 / 67.1 | 5436 | 67.1 | $18.80 |
Note: All above products include a 24" downrod, except for the 56201 model which comes standard with a 16" downrod. All products with the suffix "K" include the CTL12004RSPD reversible speed control.
*Effective amount of air volume moved past a plane 20ft. from fan. All specifications subject to change and improvement.
Estimated Yearly Energy Cost based on ENERGY GUIDE standards
Optional Accessories:
| CATALOG NO | DESCRIPTION | SHIP WT. |
|---|---|---|
| 9D12BW | Downrod 12" White | 2 lbs |
| 9D24BW | Downrod 24" White | 2 lbs |
| 9D36BW | Downrod 36" White | 2 lbs |
| 9D48BW | Downrod 48" White | 2 lbs |
| CTL12004RSPD | Controller-Reversible & Speed Control, 4 Fans, 120v | 1 lbs |
NOTE: For Brown Downrods, replace "BW" with "BB" (i.e. 9D24BW or 9D24BB)
Secondary Control Options for New Construction Applications:
| CATALOG NO | DESCRIPTION | VOLTAGE | AMPERAGE | SHIP WT. | Model Fan and Quantity per Control | |||
|---|---|---|---|---|---|---|---|---|
| 36201C | 48201C | 56001LCC | 56201CLS | |||||
| 12005 | Speed Control | 120 | 5 | 2 lbs | 3 | 2 | 2 | 2 |
| 12006 | Speed Control | 120 | 6 | 2 lbs | 7 | 5 | 5 | 5 |
| 12008 | Speed Control | 120 | 8 | 2 lbs | 10 | 6 | 6 | 6 |
| 12012 | Speed Control | 120 | 12 | 2 lbs | 12 | 10 | 10 | 10 |
NOTE: Choosing a secondary control removes the ability for the fan to be used in reverse. If speed control and reversibility are needed, please use the CTL12004RSPD.
Dimensions and Clearances:
| MODEL SERIES | A | B | C | D |
|---|---|---|---|---|
| 36201C* | 36" | 33 1/2" | 19" | 30 1/2" |
| 48201C* | 48" | 33 1/2" | 19" | 30 1/2" |
| 56001LCC* | 56" | 33 1/2" | 19" | 30 1/2" |
| 56201CLS* | 56" | 33 1/2" | 19" | 30 1/2" |
Allow for 1½" variance in "J" hook depth. Models supplied with 24" downrod.
* Note for 8" downrod subtract 13" from measurement scale "C".
NOTE: All measurements are calculated from ceiling or beam line with "J" hook mounted securely in the center of 1 1/2" deep conduit box and downrod supplied on rubber roller (See illustration).
Illustration: A diagram showing the dimensions A, B, C, and D relative to the ceiling and fan installation.
Product Information
Marley Engineered Products offers a robust portfolio of innovative, reliable, high-performance comfort heating and ventilation solutions for all your heating needs.
For more information or assistance on your next project, contact Technical Services at 800-642-4328.
Approvals: UL, CULUS
Scan the QR code to access additional specs and features.
