Omada by TP-Link

In the Box

The package includes the necessary components for mounting the access point. The vertical adjustment is ±45° and the horizontal adjustment is ±45°. Note that the actual adjustment angle may be affected by the product antenna and installation position.

Mount the AP

For additional rotation needs of the AP, connect the mount accessory between your AP bracket and mounting bracket. This mount accessory is intended for use with APs weighing less than 5 kg.

Option 1: Pole Mounting

1. Attach the bracket to the pole using the provided hardware.
2. Connect the mount accessory to the bracket.
3. Secure the mount accessory.
4. Attach the AP to the mount accessory.
5. Adjust the AP position as needed.

Option 2: Wall Mounting

1. Mount the bracket to the wall using appropriate hardware.
2. Connect the mount accessory to the bracket.
3. Secure the mount accessory.
4. Attach the AP to the mount accessory.
5. Adjust the AP position as needed.

Declarations and Support

TP-Link declares that the APM-103 is in compliance with the essential requirements and other relevant provisions of directives 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/.

For technical support, user guides, and other information, please visit https://support.omadanetworks.com/.

Recycling Information:

Please check your local municipality's disposal regulations.