SilverStone
Instruction Manual for SILVERSTONE models including: KL07E, KUBLAI 07E, KUBLAI 07E High Quality ATX Tower Chassis, High Quality ATX Tower Chassis, Quality ATX Tower Chassis, ATX Tower Chassis, Tower Chassis, Chassis
KL07E
File Info : application/pdf, 2 Pages, 1.20MB
DocumentDocument(4) 360mm Radiator Limitation
73mm
KUBLAI 07E High quality ATX tower chassis with silent designs and elegant styling
Special Features Asphalt sound-dampening mateiral Super clean internal look with PSU and drive bay cover Includes front mounted USB Type-C port Smart backside cable routing design Motherboard back plate opening for quick CPU cooler assembly Includes two 140mm fans designed to generate positive pressure Supports graphics cards up to 15.3" (388.6mm)
Warranty Information
This product has a limited 1 year warranty in North America and Australia. For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor. https://silverstonetek.com.cn/
Warranty terms & conditions
1. Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology's jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions. b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc...) c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced. d) Warranty mark/stickers are not removed or broken. Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology's maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com. Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization ("RMA") number from SilverStone. Updated warranty information will be posted on SilverStone's official website. Please visit http://www.silverstonetek.com for the latest updates.
Additional info & contacts
For North America (usasupport@silverstonetek.com)
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested. Replacement product will be warranted
for remainder of the warranty period or thirty days, whichever is longer. All products should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers
need to initiate RMA procedure with SilverStone Technology in USA by first downloading the "USA RMA form for end-users" form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only (support@silverstonetek.com)
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure. Please refer to above "Warranty terms & conditions" for further warranty details. SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City
235 Taiwan R.O.C. + 886-2-8228-1238 (standard international call charges apply)
For Europe (support.eu@silverstonetek.de)
For all other regions (support@silverstonetek.com)
NO:G11227253
ATX MB (OPTION) LEFT-SIDE-PANEL
LEFT-SIDE-PANEL
USB 3.0 x 2, USB Type C x 1 USB 3.0 Type-C X1 + SPK + MIC
POWER BUTTON RESET BUTTON
2.5" HDD X1 2.5" HDD X1 2.5" HDD X1 PSU (OPTION) 2.5" OR 3.5" HDD X3
Place your hard drive on the tray and secure with included screws. Caution: the secure with mount of hard drive tray should be place at the same side with your hard drive connector jack.
Positionieren Sie Ihre Festplatte am Einschub und sichern Sie sie mit den mitgelieferten Schrauben. Achtung: Die Befestigung des Festplatteneinschubs sollte auf der Seite erfolgen, auf der sich auch der Festplattenanschluss befindet.
Placez votre disque dur sur le plateau et fixez-le avec les vis fournies. Attention : le support du plateau de disque dur doit être du même côté que la prise du connecteur de disque dur.
Coloque su disco duro en la bandeja y fíjelo con los tornillos incluidos. Aviso: el disco duro montado en la bandeja debería situarse en el mismo lado de su conector para disco duro.
Collocare il disco rigido nel cassetto e fissarlo utilizzando le viti fornite in dotazione . Attenzione: la parte con le prese del cassetto contenente il disco rigido deve essere collocata sullo stesso lato del connettore del disco rigido.
. ! , .
,,
,,
. : .
The KL07 was designed to accommodate oversized components, but we still recommend referring to the following dimension guidelines:
(1) CPU Cooler limitation 2.0 mm
(2) Power supply limitation
224.8mm
The KL07E supports power supply with depth of up to 190mm.
KL07E 190mm.
Das KL07E unterstützt Netzteile mit einer Tiefe von bis zu 190mm.
KL07E190mmPSU
Le KL07E est compatible avec les alimentations d'une profondeur inférieure KL07E190mmPSU ou égale à 190mm.
La KL07E acepta fuentes de alimentación con una profundidad de hasta 190mm.
KL07E supporta alimentatori con profondità fino a 190mm.
KL07E190mm KL07E 190mm .
(3) Graphics card / expansion card length limitation 390mm
170.0 mm
172 mm
9.0 mm
29.0mm
Height limitation for CPU cooler is 170mm with 29mm clearance over the motherboard's top edge.
Höhenbeschränkung für CPU-Kühler 170 mm mit einem Freiraum von 29 mm oberhalb der Motherboard-Oberkante.
La limitation de hauteur des refroidisseurs de processeurs est 170mm avec un espace de 29mm au-dessus du bord supérieur de la carte mere.
La limitación de altura para disipadores de CPU es de 170mm con un espacio libre de 29mm sobre el borde superior de la placa base.
La limitazione dell'altezza del dissipatore di calore CPU è di 170 millimetri con uno spazio libero di 29mm sopra il bordo superiore della scheda madre.
170 29- .
Cooler170mm,Cooler29mm
Cooler170mm,Cooler29mm
CPU29mm 170mm
CPU 170mm 29mm.
2 mm
KL07E can support 15.35" (390mm) long cards, which covers all retail consumer graphics cards available on the market.
KL07E 15.35" (390mm) , .
KL07E unterstützt Karten bis 15.35" (390mm) . Dies deckt alle auf dem Markt verfügbare Consumer-Grafikkarten ab.
KL07EPCIE15.35" (390mm),
KL07E peut supporter des cartes de jusqu'à 15.35" (390mm) de long, ce qui couvre KL07EPCIE15.35" (390mm),
toutes les cartes graphiques disponibles actuellement sur le marché.
La KL07E puede aceptar tarjetas largas de 15.35" (390mm) , lo que cubre todas las KL07E15.35" (390mm)
tarjetas gráficas para usuario disponibles en el mercado.
KL07E supporta schede lunghe 15.35" (390mm) , coprendo tutte le schede grafiche KL07E15.35" (390mm) ,
consumer in vendita al dettaglio disponibili sul mercato.
.