Firefly SOUND LAMP

Clock/Alarm Function

Clock Setting

Press the time key briefly to enter the clock/minute setting. Press + or − to adjust hours/minutes.

Alarm Setting

Press the alarm clock key briefly to enter the clock/minute setting. Press + or − to adjust hours/minutes. After setting the time, press the alarm button briefly and press + or − to choose the alarm sound you like. Finally, press and hold the alarm key to turn on the alarm clock (after setting successfully, the alarm clock will appear on the screen).

Cancel The Alarm

Press and hold the light touch sensor part to turn off the alarm when it rings. Press and hold the alarm key until the alarm sign on the screen disappears.

Technical Parameters

To avoid damage caused by excessive voltage, please charge with a plug below 5V. The 1200mAh battery provides long playing and lighting time. It can be fully charged in 3 hours and continuously working for more than 4 hours.

Product Overview

Image of the "Firefly SOUND LAMP" by XO POPPY. It is a white, cylindrical lamp with a digital clock display on the front showing "04:38". Below the clock, it says "Firefly SOUND LAMP" and the FCC ID "2BBPLPYTLMP PY-TLMP". The top part of the lamp is illuminated, indicating it is a light source.

Key Diagram

The device features several key components:

• On/Off Switch: Located on the back, slides to the right to activate Bluetooth and light modes.
• Charging Port: A DC5V input port for charging the device.
• Time Key: Used for setting the clock and alarm times.
• Alarm Clock Key: Used for alarm setting and cancellation.
• Play/Pause Answer Call Hangup: A central button on the front for controlling music playback, answering/ending calls.
• Bluetooth/Radio/White Noise: A button on the front left to switch between Bluetooth, FM Radio, and White Noise modes.
• Mic: A small microphone hole on the front for hands-free calls.
• Indicator Light: A small LED on the front indicating device status.
• LED Touch Sensor: Located on the top surface of the lamp for controlling the light.

Additionally, the Bluetooth/Radio/White Noise button has secondary functions:

• Press & hold to Increase Volume
• Press Once to Skip Song
• Press & hold to Reduce Volume
• Press Once to Play Previous Song

Key Function Operation

General Operation

Turn the "ON/OFF" switch to the right to enter Bluetooth mode and light mode.

1. Bluetooth Function

The device announces "ON" with voice prompts upon activation, indicating it is in pairing mode. It can pair and connect with Bluetooth audio devices in this state.

2. Mobile Phone Connection

Enable Bluetooth on your mobile phone's settings and connect to "PY-TLMP". A voice prompt and on-screen display will confirm successful pairing.

3. FM Radio

Press the 'M' key once to switch to FM function. Connect the charging cable to the micro port to use it as a radio antenna (the other end does not need to be connected to any equipment). Press the pause key once to automatically search and save stations. Select saved stations using the '+' or '−' buttons.

LED Function

Upon turning on the device, it defaults to a low-level white light. Tap the center point of the LED Touch Light Sensor to cycle through lighting modes: White Light, Warm Light, Color Light, Breathing Light, and Rhythm. The light levels can be adjusted through 5 gears:

• 1st Gear: Low Light
• 2nd Gear: Medium Light
• 3rd Gear: Bright Light
• 4th Gear: Warm Light
• 5th Gear: Light Off

Press and Hold: Color Light Mode. Press and hold the touch sensor for 2 seconds to enter the color light mode. The sequence of colors is: Red, Green, Dark Blue, Yellow, Light Blue, Purple, Breathing Light, and Rhythm (sound-reactive, flashing with music rhythm).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.