CarlinKit Tbox LITE S User Manual

Function Introduction

The CarlinKit Tbox LITE S expands the Android system platform through the car's USB interface, enabling richer audio-visual entertainment. It supports Bluetooth connectivity, phone integration, and HD output display, facilitating wireless CarPlay and wireless Android Auto functionality.

Product Specification

Compatible Cars and Mobile Phones

Applicable Car Models

Original cars equipped with wired CarPlay / Android Auto.

For specific model compatibility, please visit: https://www.apple.com/ios/carplay/available-models/

Compatible Mobile Phones

• iPhone: Supports iPhone 6 and above, running iOS 10 and above.
• Android Phone: Supports Android 11.0 and above.

Connection Instructions (Wired CarPlay/Android Auto)

Initial Setup:

• A diagram shows the device with USB and HDMI ports. Connect the Tbox LITE S to your car's USB port.
• On your car's original system interface (specific interface may vary by model), tap the "CarPlay" or "Android Auto" icon on the screen to enter the product's Android system interface.

Switching Operating Modes:

Insert the pin tool and press for approximately 2-3 seconds to switch between CarPlay (default) and Android Auto modes.

Key Functions:

• Bluetooth Phone: Tap the "Bluetooth Phone" icon to pair with your phone's Bluetooth and sync contacts to the car screen.
• Settings: Tap the "Settings" icon to change languages, customize wallpapers, and adjust other preferences.
• Home: Tap the "Home" icon to return to your car's original system interface.

WiFi Connection Instructions

To use online streaming services:

1. Turn on your mobile phone's hotspot or the car's equipped 4G/5G hotspot.
2. Navigate to Settings on the device, then select WLAN. Tap your phone's or car's hotspot name.
3. Once successfully connected, you can use applications like online video and music streaming.

Wireless CarPlay/Android Auto Connection Instructions

1. Tap the "AutoKit" icon on the main interface to enter the connection screen.
2. Ensure Bluetooth and WiFi are enabled on your iPhone or Android phone.
3. Search for the Bluetooth name displayed on the car screen within your mobile phone's Bluetooth list and tap to pair.
4. Wait for the connection to complete successfully. Wireless CarPlay/Android Auto will then be active.

HD Output

By connecting to other displays via the HDMI port , high-definition image output can be achieved. The screen can be split and switched for display without interference, allowing for shared high-definition video enjoyment.

After-sales Service & Warranty

Thank you for using this product. To protect your rights and interests, CarlinKit provides high-quality after-sales service. You are entitled to a one-year warranty service from the date of purchase for failures caused by product quality issues. Please keep this warranty card as proof of service. CarlinKit reserves the right to interpret the after-sales service policy.

Warranty Card Details

• Name: [Placeholder for User Name]
• Phone Number: [Placeholder for Phone Number]
• Address: [Placeholder for Address]
• Dealer's Name (Stamped): [Placeholder for Dealer Name]
• Purchase Date: [Placeholder for Purchase Date]
• E-Mail: [Placeholder for E-Mail]

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.