AmpliFi HD Quick Start Guide

Package Contents

The AmpliFi HD system includes the following components:

• AmpliFi Router: A white cylindrical router with a circular touchscreen display.
• AmpliFi MeshPoints (Qty. 2): Two white, tall, cylindrical devices designed to extend Wi-Fi coverage.
• Power Adapter: A white rectangular adapter for powering the router.
• Ethernet Cable: A white coiled cable for wired network connections.

Hardware Overview

Router

The AmpliFi Router features a front touchscreen display and an adjustable LED on the bottom. The rear panel includes:

• 1. Touchscreen Display: The front of the router features an adjustable, full-color touchscreen display.
• 2. Adjustable LED: The bottom of the router features an adjustable LED, which is fully lit by default when the router is configured and ready for use. Brightness settings are configurable via the AmpliFi app.
• 3. Ethernet Ports: Four Gigabit Ethernet ports (10/100/1000 Mbps) for connecting wired network devices.
• 4. WAN Port: Connects to the broadband modem provided by your Internet Service Provider (ISP).
• 5. Power Port: Connects the Power Adapter.
• 6. USB Port: Reserved for future use.

MeshPoint

The AmpliFi MeshPoint is a cylindrical device with:

• 1. Adjustable Antenna: The antenna can be adjusted to provide optimal signal coverage for your location.
• 2. Signal LEDs: These LEDs indicate signal strength once the MeshPoint is connected to the Router.

Installation

The AmpliFi Router can be installed using one of two methods:

App Users

This method utilizes the AmpliFi app for iPhone or Android.

1. Download the AmpliFi app from the App Store or Google Play.
2. Connect your mobile device to the default AmpliFi Wi-Fi network (SSID).
3. Open the AmpliFi app. The app will guide you through the setup process, including naming your wireless network and creating a password.

Non-App Users

This method involves connecting directly to the default AmpliFi wireless network (SSID) from a computer or tablet.

1. Connect the AmpliFi Router to your modem using an Ethernet cable. Plug the router's power adapter into a wall outlet.
2. Connect the AmpliFi Router to the AmpliFi unit using an Ethernet cable. Plug the unit's power adapter into a wall outlet.
3. Connect the AmpliFi Router to power.
4. Connect the AmpliFi MeshPoint to power by plugging its power adapter into a wall outlet.
5. Follow the on-screen instructions on the AmpliFi Router's touchscreen or connect a computer/tablet to the AmpliFi Wi-Fi network and navigate to the setup wizard to configure your system. This wizard will prompt you to name your wireless network and create a password.

Installing the MeshPoints

To extend your Wi-Fi coverage, place MeshPoints strategically. The system supports optimal placement for "Best Performance" and "Mesh Multi-Hop" configurations.

Plug the MeshPoint into a wall outlet.

App Features

The AmpliFi app provides comprehensive control and monitoring of your Wi-Fi system:

• System: View an overview of network status, connected clients, and active download/upload speeds. Tap devices to display/edit settings. (Icon: ⚙️ System)
• Performance: Run speed tests to check download and upload speeds, and ping time. Swipe left to view historical data. (Icon: ? Performance)
• Guest: Create guest networks with customizable time limits. Guests connect using a network name with a "-guest" suffix. (Icon: ? Guest)
• Family: Create profiles for family members or groups, assign devices, and schedule "quiet time" when internet access is restricted. (Icon: ?‍?‍?‍? Family)
• Diagnose: Check your WAN link, IP settings, internet connection, and MeshPoint status. (Icon: ? Diagnose)

Access additional features and support via the side menu, including Remote Access, Help Center, and Live Support.

Resetting to Factory Defaults

If the AmpliFi Router administration password is lost, factory default settings can be restored. To reset the AmpliFi Router, use a straightened paper clip to press the Reset button located on the bottom of the router for approximately 10 seconds until the LED turns off. If the AmpliFi Router is reset, all MeshPoints should also be reset using the same method.

System Specifications

Supported Data Rates

Operating Frequency

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.

⚠️ WARNING: Do not use this product in a location that can be submerged by water.

⚡️ WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Limited Warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. For details, visit ui.com/support/warranty.

Compliance

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device is restricted to indoor use.

Canada (ICES-3(B)/NMB-3(B))

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

(Compliance statements in French and Portuguese were present in the original document but are summarized here for the primary English output.)

IMPORTANT NOTE: Radiation Exposure Statement

• This equipment complies with radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CE Marking

CE marking on this product represents the product is in compliance with all directives that are applicable to it.

Country List: AT BE BG CY CZ DE DK EE EL ES FI FR HR HU IE IT LV LT LU MT NL PL PT RO SE SI SK UK (BFWA members noted in blue)

Note: This device meets Max. TX power limit per ETSI regulations.

The following apply to products that operate in the 5 GHz frequency range:

• Note: This device is restricted to indoor use only when operating in the 5150 - 5350 MHz frequency range within all member states.
• Note: All countries listed may operate at 30 dBm. BFWA member states may operate at 36 dBm.
• Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member states. Other countries listed may use the 5.8 GHz frequency band.

WEEE Compliance Statement

Statement regarding Waste Electrical and Electronic Equipment compliance.

Declaration of Conformity

Document confirming the product's conformity with relevant regulations.

Online Resources

Links to further information and support.

©2016-2020 Ubiquiti Inc. All rights reserved.