Metal Platform Bed Frame

Step 1: Attach Side Frames

Attach the two Side Frames (Part 3) to the sides of the two main Frames (Parts 1 & 2) using four Screws (Hardware B). Repeat the same installation steps for the second set of frames to create two connected frame units.

Note: Ensure the groove on the Side Frame (Part 3) faces inward towards the center of the bed frame.

Diagram Description: An illustration shows two main frames being connected to two side frames. A close-up view details the connection point, showing screws being inserted into pre-drilled holes.

Step 2: Connect Middle Frame

Align the head and tail of the Middle Frame (Part 4) with the two assembled frame units from Step 1. Secure the Middle Frame completely using four Screws (Hardware A).

Diagram Description: An illustration shows the middle frame being positioned between the two previously assembled frame sections. Arrows indicate the alignment points. A close-up view highlights the screw placement for securing the middle frame.

Step 3: Secure Frame Legs

Align the screw holes located on the legs of the two main frame sections. Secure them together using two Screws (Hardware C) and two Nuts (Hardware E).

Diagram Description: An illustration shows the connection points at the legs of the frame where the two sections meet. A close-up view details how a screw passes through the frame legs and is secured with a nut.

Step 4: Install Center Slats

Insert the Center Slat (Part 6) into the Center Slat (Part 5). After both center slats are connected, insert them into the designated grooves in the middle of the Side Frames (Part 3). Fix the Center Slats (Parts 5 & 6) to the Middle Frame (Part 4) using one Screw (Hardware D).

Diagram Description: An illustration shows two center slats being placed into the middle section of the bed frame. Arrows indicate insertion into the grooves of the side frames. A close-up view shows the screw securing the center slats to the middle frame.

Step 5: Place Remaining Slats

Insert the remaining twenty-four Slats (Part 7) evenly onto each groove of the assembled frame sections (Parts 3 & 4).

Diagram Description: An illustration shows the final placement of the 24 slats across the entire bed frame, fitting them into the pre-defined grooves on the side frames and middle frame.