Instruction Manual for Desoutter models including: TRACKBASE, 2APE2-TRACKBASE, 2APE2TRACKBASE, 6158133350 Virtual Cable Tracking Base, Virtual Cable Tracking Base
ETS GEORGES RENAULT TRACKBASE UWB POSITIONING MODULE 2APE2-TRACKBASE 2APE2TRACKBASE trackbase
File Info : application/pdf, 8 Pages, 754.81KB
DocumentDocumentTracking base Printed Matter No. 6159925550 Issue No. 03 Date 09/2021 Page 1 / 8 Safety Information Valid from Serial No. 49001900000 to 49992299999 Model Tracking base Part number 6158133350 Download the latest version of this document at www.desouttertools.com/info/6159925550 WARNING To reduce risk of injury, everyone using, installing, repairing, maintaining, changing accessories on, or working near this tool MUST read and understand these instructions before performing any such task. DO NOT DISCARD - GIVE TO USER Table of Contents Technical Data ................................................................................................... 3 Technical data ............................................................................................. 3 Power supply .................................................................................... 3 Power consumption .......................................................................... 3 Weight .............................................................................................. 3 Storage and use conditions.............................................................. 3 Wireless Communication specifications ........................................... 3 Declarations ....................................................................................................... 3 EU DECLARATION OF CONFORMITY ...................................................... 3 WEEE .......................................................................................................... 3 FCC compliance Class A............................................................................. 3 FCC Responsible party ............................................................................... 3 IC compliance Class A ................................................................................ 4 Information regarding Article 33 in REACH ................................................. 4 Regional Requirements ............................................................................... 4 Safety .................................................................................................................. 4 Intended use ................................................................................................ 4 Product Specific Instructions ....................................................................... 5 Description ....................................................................................... 5 Power supply and communication.................................................... 5 How to read indicators...................................................................... 5 Electrical Safety ........................................................................................... 6 Signs and Stickers ....................................................................................... 6 Useful Information ............................................................................................. 6 Website........................................................................................................ 6 Information about installation manuals ........................................................ 6 Information about spare parts...................................................................... 6 Country of origin .......................................................................................... 6 Safety Data Sheets MSDS/SDS .................................................................. 7 Copyright ..................................................................................................... 7 2 / 8 09/2021 Technical Data Technical data Power supply PoE: 48 V USB-C: 5 V Power consumption PoE 20 mA LPS (Limited Power Source) on PoE power supply Maximum PoE power supplied: 15.4 W USB-C 180 mA Weight 0.280 kg 0.62 lb Storage and use conditions Storage temperature Operating temperature Storage humidity Operating humidity Altitude up to Usable in Pollution degree 2 environment IP54 Indoor use only 0° to +40°C (32 to +104 F) +5 to 40 °C (41 to 104 F) 0-80 % RH (non-condensing) 0-80 % RH (non-condensing) 2000 m (6562 feet) Wireless Communication specifications Frequency: 3.2 7.0 GHz power - 0.831 dBm Declarations EU DECLARATION OF CONFORMITY We, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint Herblain, France, declare under our sole responsibility that the product (with name, type and serial number, see front page) is in conformity with the following Directive(s): 2011/65/EU, 2014/53/EU Harmonized standards applied: EN IEC 62368-1 :2014, EN 301 489-33:2017 V2.2.0, EN 302 065-2 V2.1.1 Authorities can request relevant technical information from: Pascal ROUSSY, R&D Manager, 38 rue Bobby Sands, 44818 Saint Herblain, France Saint-Herblain, 10/07/2019 Pascal ROUSSY, R&D Manager Signature of issuer Safety Information WEEE Information concerning Waste of Electrical and Electronic Equipment (WEEE): This product and its information, meets the requirements of the WEEE Directive (2012/19/EU), and must be handled in compliance with the directive. The product is marked with this symbol: Products with the symbol of a crossed out wheelie bin with a single black line underneath, indicates that parts within the product must be handled in compliance with the WEEE Directive. The entire product, or the WEEE parts, can be sent to your "Customer Centre" for handling. FCC compliance Class A This device complies with Part 15 of the FCC Rules. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this device. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Responsible party Name: Mark Johnson Position: General Manager Address: Chicago Pneumatic Tool Company LLC 1815 Clubhouse Road Rock Hill SC 29730 USA Mobile: +1 800 624 4735 Email: mark.johnson@desouttertools.com 09/2021 3 / 8 Safety Information NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Any changes or modifications to this equipment not expressly approved by Desoutter may cause, harmful interference and void the FCC authorization to operate this equipment. IC compliance Class A CAN ICS-3(A)/NMB-3(A) (English) This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. (French) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) l'appareil ne doit pas produire de brouillage; 2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. (English) This equipment complies with RSS102's radiation exposure limits set forth for an uncontrolled environment under the following conditions: 1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (Français) Cet équipement est conforme aux limites d'expositions de la CNR102 applicables pour un environnement non contrôlé aux conditions suivantes: 1. Cet émetteur ne doit pas être co-localisé ou opérer en conjonction avec toute autre antenne ou émetteur. Information regarding Article 33 in REACH The European Regulation (EU) No. 1907/2006 on Registration, Evaluation, Authorization and restriction of Chemicals (REACH) defines among other things requirements related to communication in the supply chain. The information requirement applies also to products containing so called Substances of Very High Concern (the "Candidate List"). On 27 June 2018 lead metal (CAS nr 7439-92-1) was added to the Candidate List. In accordance with the above this is to inform you that certain electrical and mechanical components in the product may contain lead metal. This is in compliance with current substance restriction legislation and based on legit exemptions in the RoHS Directive (2011/65/EU). Lead metal will not leak or mutate from the product during normal use and the concentration of lead metal in the complete product is well below the applicable threshold limit. Please consider local requirements on the disposal of lead at product end of life. Regional Requirements WARNING This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/ Safety DO NOT DISCARD - GIVE TO USER WARNING Read all safety warnings, instructions, illustrations and specifications provided with this product. Failure to follow all instructions listed below may result in electric shock, fire, property damage and/or serious injury. Save all warnings and instructions for future reference. WARNING All locally legislated safety rules regarding installation, operation and maintenance shall be respected at all times. Statement of Use · For professional use only. · This product and its accessories must not be modified in any way. · Do not use this product if it has been damaged. · If the product data or hazard warning signs on the product cease to be legible or become detached, replace without delay. · The product must only be installed, operated and serviced by qualified personnel in an industrial environment. Intended use The tracking base has been designed for communicating with trackers mounted in tools via Ultra-Wide Band (UWB) on one side and to CONNECT on the other side. No other use permitted. This equipment is not suitable for use in locations where children are likely to be present. Model Tracker (EABC) Tracker (EPBC) Tracker (EABS) CONNECT-X CONNECT-W Part number 6158132590 6158132600 6158134150 6159327220 6159327230 4 / 8 09/2021 Product Specific Instructions Description Safety Information Plug an Ethernet cable to the PoE injector (out) and to CONNECT. Via external PoE injector The PoE injector is not supplied. 1 USB-C 2 Ethernet/Ethernet PoE 3 Mounting screw access door 4 Power supply indicator 5 UWB indicator 6 Ethernet indicator Power supply and communication Via USB-C 1 Tracking base 2 CONNECT-X 6159327220 (to be ordered separately) CONNECT-Y 6159327230 (to be ordered separately) 3 PoE injector 6158133960 (to be ordered separately) Plug an Ethernet cable to the PoE injector (in) and to the Ethernet port of the tracking base. Plug an Ethernet cable to the PoE injector (out) and to CONNECT. How to read indicators 1 Tracking base 2 Connect-X 6159327220 (to be ordered separately) Connect-Y 6159327230 (to be ordered separately) 3 Computer (For service) Plug a USB3.0 A to C cable (not supplied) to the tracking base and to any USB port of CONNECT. Both power supply and communication are provided. Via Connect PoE injector The PoE injector is not supplied. 1 Tracking base 2 Connect-X 6159327220 (to be ordered separately) Connect-Y 6159327230 (to be ordered separately) Plug an Ethernet cable to the PoE injector (in) and to the Ethernet port of the tracking base. Item Indicator Description 4 Power supply indicator This LED lights up in White and remains steady when the power supply is correctly provided. 5 UWB indicator This LED shows UWB communication status: · Blue (Blinking): communication between Tracking base/Tracker is not functional · Green (Blinking): communication between Tracking base / Tracker is functional. 6 Ethernet/ USB indica- This LED shows Ethernet / tor USB communication status between Tracking Base and CONNECT. When Ethernet /USB communication has been established, this LED lights up in Blue and remains steady. By default, tracking base is defined as a COORDINATOR Tracking Bases. Indicator behavior depends on Tracking Base type declaration. 09/2021 5 / 8 Safety Information · Refer to the Product Instructions of Tracking base (printed matter No. 6159925540) available at https:// www.desouttertools.com/resource-centre. · Tracking base model type: Tracking base model type CE only CE & FCC Tracking base se- Date of producrial number index tion 4900xxxxxxx to 4903xxxxxxx From index = 0 to 3 Before 2021 4904xxxxxxx and After 2021 later From index = 4 Electrical Safety WARNING This apparatus must be earthed. CAUTION Multiple power sources may be present. Disconnect ALL power sources before servicing. CAUTION The socket-outlet shall be easily accessible. · Earthed equipment must be plugged into a socket that has been properly installed and earthed according to appropriate regulations. Never remove the earth pin or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in any doubt as to whether the outlet is properly earthed. Should the equipment suffer electronic malfunction or breakdown, the earth provides a low resistance path to carry electricity away from the user. Applicable only to Class I (earthed) equipment. · Failure to comply with these operating instructions may impair the safety of this equipment. · Only use the cord supplied with the controller to connect to the mains, and the cord supplied with the tool to connect to the controller. Do not modify the cords or use them for other purposes. Use only genuine replacement parts. · Failure to follow these instructions may result in electric shock. · Must not be used in explosive atmospheres. · Avoid physical contact with grounded surfaces such as pipes, radiators, ovens and refrigerators. There is an increased risk of electric shock if your body is grounded. · Do not expose the equipment to rain or wet conditions. Water entering the equipment will increase the risk of electric shock. This instruction does not apply to equipment classified as watertight or splash proof. · For minimum electrical interference, locate the equipment as far as possible from sources of electrical noise, e.g. arc welding equipment etc. · Do not abuse the power lead. Never use the power lead to carry the equipment or to pull the plug from a socket. Keep the power lead away from heat, oil, sharp edges or moving parts. Replace damaged leads immediately. Damaged leads increase the risk of electric shock. · When working simultaneously with welding equipment, the work piece must be earthed separately while welding is in progress. This is to prevent the return current passing through the controller earth cables, in case the return lines for the welding equipment have not been mounted correctly on the work piece. Desoutter recommends that earthing be carried out with a conductor area at least as large as the return line for the welding equipment being used. Signs and Stickers The product is fitted with signs and stickers containing important information about personal safety and product maintenance. The signs and stickers shall always be easy to read. New signs and stickers can be ordered by using the spare parts list. Useful Information Website Information concerning our Products, Accessories, Spare Parts and Published Matters can be found on the Desoutter website. Please visit: www.desouttertools.com. Information about installation manuals Detailed operating instructions, installation and upgrade manuals are available at https://www.desouttertools.com/ resource-centre. Information about spare parts Exploded views and spare parts lists are available in Service Link at www.desouttertools.com. Country of origin France 6 / 8 09/2021 Safety Data Sheets MSDS/SDS The Safety Data Sheets describe the chemical products sold by Desoutter. Please consult the Desoutter website for more information https://www.desouttertools.com/legal/sds. Copyright © Copyright 2019, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint Herblain, France All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorised parts is not covered by Warranty or Product Liability. Safety Information 09/2021 7 / 8 Original instructions Founded in 1914 and headquartered in France, Desoutter Industrial Tools is a global leader in electric and pneumatic assembly tools serving a wide range of assembly and manufacturing operations, including Aerospace, Automotive, Light and Heavy Vehicles, Off-Road, General Industry. Desoutter offers a comprehensive range of Solutions -tools, service and projects- to meet the specific demands of local and global customers in over 170 countries. The company designs, develops and delivers innovative quality industrial tool solutions, including Air and Electric Screwdrivers, Advanced Assembly Tools, Advanced Drilling Units, Air Motors and Torque Measurement Systems. Find more on www.desouttertools.com More Than Productivity Ets Georges Renault 38 rue Bobby Sands 44818 Saint Herblain - FR Phone:+33 (0)240 802 000 www.desouttertools.comST4 PDF Engine (Build 10.0.2.0)