VAR TECH Short Form Catalogue 2025-2026

Electronic Test & Measuring Instruments | Electronic Repair & Production Tools

QUALITY • RELIABILITY • ECONOMY

Digital Multimeters

V MAS 830 LB

3½ Digits, Manual Ranging, 600 V AC/DC, 200 μA ~ 10 A DC, 200 Ω ~ 2 MΩ Res., Tr. (hFE) Test, Diode & Cont. Test, D/H & B/L, With Holster.

V 830 L +

3½ Digits, TRUE RMS, Manual Ranging, 600 V AC/DC, 20 μA ~ 10 A DC, 200 Ω ~ 200 MΩ Res., Diode, Tr. (hFE) & Cont. Test, D.H., B/L, NCV, Flashlight, With Holster.

M 890

3½ Digits, Manual Ranging, TRMS, 1000/750 V DC / AC, 10 A AC/DC, 20 MΩ Resistance, Continuity test, Diode, Transistor (hFE) Capacitance, Frequency Test, APO., Live test.

V M 890 G

3½ Digits, Manual Ranging, 1000/750 V DC / AC, 20 A AC/DC, APO., Cont., Diode, Tr., Cap., Freq., & Temp. Test, With Holster.

V 92

3½ Digits (6000 Counts) TRUE RMS, Auto Ranging, 600 V AC/DC, 600 μA ~10 A AC/DC, High precision DMM, A.P.O., 600 Ω ~ 60 MΩ Res., Freq., Meas., (upto 2 MHz), Cap., Temp., Diode & Cont. Test, D/H, B/L, With Holster. NCV, Flashlight.

V 92 S

6000 Counts, TRMS, Fully Auto, 600 V DC/AC, 10 A AC/DC, Colour Bright Dual Display with Bar Graph, B/L, NCV, Torch, APO, ACV With Freq., 60MΩ Res., Cap., Temp., & Freq., (10 MHz) Meas., Cont. & Diode Test, D.H., Live Test, I/P Jack Prompt with Light.

V 890 D

3½ Digits, TRMS, Manual Ranging, 1000 V DC / 750 V AC, 20 A AC/DC, A.P.O., NCV, Flashlight, Tr. (hFE) Test, Cap., Test, A/V Cont., & Diode Test, 200 Ω ~ 20 MΩ Res., D/H & B/L, Mains Freq. Test (750 V AC Range), With Holster. Sturdy & High precision.

V 8222 G

3½ Digits, TRUE RMS, Manual Ranging, With Backlight, 1000 V DC/AC, 20A AC/DC, 200MΩ Res., Cap., Temp., Freq. (Upto 20 MHz), NCV, Live Wire, Cont..Diode & Tr. Test, D.H., REL, Torch, APO, With Holster.

V 68

3½ Digits (4000 Counts), TRUE RMS, Auto / Manual Ranging, 1000 V DC / 750 V AC, 400 μA ~ 10 A AC/DC, NCV, Flashlight, A.P.O., 400 Ω ~ 40 MΩ Res., Cap., Temp., Freq. (Upto 20 MHz) & D/Cycl., Diode & Cont., Test, REL., Tr. (hFE) Test, D/H, B/L, Mains Freq. Test, With Holster. Flagship High precision DMM.

V 980

4½ Digits (20000 Counts), TRUE RMS, Manual Ranging, With Backlight, 1000 / 750 V DC/ AC, 20A AC/DC, 200MΩ Res., Cap., Temp., Freq. (Upto 2 MHz), Cont..Diode & Tr. Test, D.H., REL, Torch, APO, Conductivity Test, With Holster.

V 981+

High Precision Bench Top DMM 30000 Counts HD TFT Display, Auto Ranging, With P.C. Interface, True RMS, 1000/750VDC/AC, 10 A AC / DC, Cap., Temp., & Freq., Tests, Data Record, Run / Stop, Math, Dual Display, Etc., Continuity & Diode Test, Type C Charging, Built in Battery.

V 6610+

4 Digits, Auto Ranging, 2,00,000 LUX Max., Flexible Detachable Sensor, Data Hold, Min. / Max., REL, LUX/FC Select & B/L, With Carrying Pouch.

Clamp Meters Etc.

V 266

3½ Digits, Manual Ranging, 200 / 1000 A AC, 1000 V DC / 750 V AC, 200 Ω & 20 KΩ Res., Cont. Test, D/H, Rubber Grip, Holding Strap, With Pouch. Optional: M 261 - Insu. Test adaptor. Also Available : V 266F with Freq. Meas.

V 266+

3½ Digits (4000 Counts), Auto Ranging, 40 / 400 / 1000 A AC, 600 V AC/DC, 400 Ω ~ 40 MΩ Res., Diode & Cont., NCV, Torch, D/H, With Carrying Pouch.

V 266 C

3½ Digits (6000 Counts), Auto Ranging, 60 / 600 / 1000 A AC, 600 V AC/DC, 600 Ω ~ 60 MΩ Res., Diode & Cont., Cap., Freq., Temp., NCV, Torch, D/H, B/L, With Carrying Pouch.

V 2266

3½ Digits (6000 Counts), 6 A ~ 1000 A AC, TRUE RMS, High precision Clamp meter, Auto Ranging, 1000 V DC / 750 V AC, 600 Ω ~ 60 MΩ Res., Low Impedance (Low Z) ACV Meas., Diode & Cont., A.P.O., NCV & Live Wire Test, Flashlight, Min / Max test, Data Hold & Backlight, With Carrying Pouch.

V 2001 +

3½ Digits (6000 Counts), Smart Clamp Meter, Auto Ranging, 6 / 60 / 200 A AC, 1000/750 V DC/AC, 600 Ω ~ 60 MΩ Res., Diode & Cont., Cap., Temp., NCV, Torch, D/H, B/L, With Carrying Pouch.

V 2002 +

3½ Digits (6000 Counts), Smart Clamp Meter, Auto Ranging, 600 mA / 6 A / 60 A AC, 6 A / 60 A DC, 1000/750 V DC/AC, 600 Ω ~ 60 MΩ Res., Diode & Cont., Cap., Freq., Temp., NCV, Torch, D/H, B/L, With Carrying Pouch.

M 2101

3½ Digits (6000 Counts) TRUE RMS, Auto / Manual Ranging, A.P.O., 600μA~1000 A AC/DC, (μA Range for In-Circuit Meas.) 1000 V DC / 750 V AC, 600 Ω ~ 60 MΩ Res., Freq. (20 MHz) & D/Cycle Meas., Temp., & Cap. Test, D/H, REL., B/L, Mains Freq. Test, With Carrying Pouch.

V 2101+

3½ Digits (6000 Counts) TRUE RMS, 2000 V AC / DC, 60 ~ 1000 A AC / DC, A.P.O., Freq., / D. Cycle (upto 10 MHz), W/P.C.C. Cap., Temp., Diode & Cont., Test, D/H, REL., Mains Freq. Test, NCV & Live Wire Test, In Rush Current & V.F.C. With Carrying Pouch.

Thermometers Etc.

V 6500

DIGITAL THERMOMETER: -150°C ~ 1,300 °C 'K' Type Thermocouple, High Precision Thermometer, 3½ Digits, A.P.O., Data Hold, 0.1° & 1° Res., Min/Max/Avg., With Bead Type Probe, Large HD LCD Display. Optional: Rod Type Probe.

THM - S1

THERMOMETER: -10 °C ~ 50 °C (14 °F ~ 122 °F), 20 ~ 90% R.H., °C/°F Switching, 3 Line Display - Temp. / Humidity, Clock & Comfort Display, Min./Max.

L.C.R. Meters

V 8222 H

L.C.R. D.M.M.: 3½ Digits, Manual Ranging, 1000 V DC / 750 V AC, TRUE RMS, High Precision L.C.R. DMM, A.P.O., 200 μA ~ 20 A AC/DC, 2 mH ~ 20 H, 20 nF ~ 2 mF, 200 Ω ~ 200 MΩ Res., Freq., (upto 20 MHz), Temp., Diode & Cont. Test, Tr. (hFE) Test, Min./Max., Pk.H., REL, B/L, With Holster.

LCM - 1

L.C. METER: 4 Digit LCD Display Superior Quality Portable LC Meter. Low Range mode: Capacitance 0.01pF-10uF, Inductance 0.001uH-100mH. High Range mode: Capacitance 1uF-100mF, Inductance, 0.001mH-100H. Test Frequencies, L & C range: 500kHz, Hi. L Range : 500Hz ~50KHz.

LCR-1 B

LCR Meter: Bench Top, High Precision, Mains Oper., L-C-R-D-Q Etc. Meas., With Numeric Keypad, 5 Digits in 3.5" Colour LCD Display, 10 Hz~10 KHz Continuously Variable, With USB & RS232.

LCR-2 A

LCR Meter: Bench Top, High Precision Mains Oper., L-C-R-D-Q Etc. Meas., 5 Digits in 3.5" Colour LCD Display, 100Hz~10 KHz in steps, With USB & RS232.

VARIOUS OTHER MODELS ARE AVAILABLE 100 KHz L.C.R. Meter Available on Made to Order Basis.

D.C. Power Supplies

3005 B

0~30V / 0~5A. 2 L.E.D. Meters of 4 Digits. Output On/Off switch. With voltage Live control CV/CC, Fine & Coarse Control. Linear.

3005 N+

0~30V, 0~5A, CV/CC, With 2 L.E.D. Meters of 4 Digits, Numeric Controls. Heavy Duty, Linear.

3010

0~30V / 0~10A, Linear CV/CC, With 2 L.E.D. Meters & O/P On/Off Switch.

3020

0~30V / 0~20A, Linear CV/CC, With 2 L.E.D. Meters & O/P On/Off Switch.

6005

0~60V / 0~5A, Linear CV/CC, With 2 L.E.D. Meters & O/P On/Off Switch.

6010

0~60V / 0~10A, Linear CV/CC, With 2 L.E.D. Meters & O/P On/Off Switch.

3005 S / 3010 S / 6005 S

3005 S: 0~30V, 0~5A. 3010 S: 0~30V, 0~10A. 6005 S: 0~60V, 0~5A. SMPS Based, CV/CC, With 2 L.E.D. Meters of 3 Digits, Output On/Off switch, Panel Lock, Fine & Coarse Control. Adjustable OVP, OCP and OPP range.

3020 SS

0~30V, 0~20A. SMPS Based, CV/CC, 2 L.E.D. Meters of 4 Digits, Slim Design. Output On/Off switch, Fine & Coarse Control.

PPS-3005 S

Programmable: 0~30 V, 0~5 A. 5 L.E.D. Multicolour Meters Of 4 digits, SMPS Based, 6 Sets of memory. Panel lock Facility, Output On / Off facility, Over voltage, current & temp. protection. With USB Interface.

PPS-3010 S

Programmable: 0~30 V, 0~10 A. 5 L.E.D. Multicolour Meters Of 4 digits, SMPS Based, 6 Sets of memory. Panel lock Facility, Output On / Off facility, Over voltage, current & temp. protection. With USB Interface.

PPS-3610 S

Programmable: 0~36 V, 0~10 A. 5 L.E.D. Multicolour Meters Of 4 digits, SMPS Based, 6 Sets of memory. Panel lock Facility, Output On / Off facility, Over voltage, current & temp. protection. With USB Interface.

PPS-3020 S

Programmable: 0~30 V, 0~20 A. 5 L.E.D. Multicolour Meters Of 4 digits, SMPS Based, 6 Sets of memory. Panel lock Facility, Output On / Off facility, Over voltage, current & temp. protection. With USB Interface.

PPS-6005 S / PPS-6010 S

PPS-6005 S: 0~60 V, 0~5 A. PPS-6010 S: 0~60 V, 0~10 A. 5 L.E.D. Multicolour Meters Of 4 digits, SMPS Based, 6 Sets of memory, Panel lock Facility, Output On / Off facility, Over voltage, current & temp. protection. With USB Interface.

PPS-10003 S

Programmable: 0~100 V, 0~3 A. 5 L.E.D. Multicolour Meters Of 4 digits, SMPS Based, 6 Sets of memory, Panel lock Facility, Output On / Off facility, Over voltage, current & temp. protection. With USB Interface.

PPSA-100W-8005 S

Auto Ranging: 0~80 V, 0~5 A, 100 W Max, SMPS Based, CV/CC, With L.E.D. Displays for V, I & W, With RS232 Interface, Remote sensing.

VARIOUS OTHER PROGRAMMABLE POWER SUPPLY RATINGS ARE AVAILABLE (EV & BATTERY CHARGING APPLICATIONS)

WE ALSO OFFER CUSTOMIZABLE POWER SUPPLIES FROM 5V TO 1000V AND 1A TO 10000A (MADE TO ORDER).

3020 SR

0~30V, 0~20A. SMPS Based, CV/CC, 2 L.E.D. Meters of 4 Digits, Slim Design. Fine & Coarse Control. With PC Interface Current Pre-Set Facility.

3030 SR

0~30V, 0~30A. SMPS Based, CV/CC, 2 L.E.D. Meters of 4 Digits, Slim Design. Fine & Coarse Control. With PC Interface Current Pre-Set Facility.

3040 SR

0~30V, 0~40A. SMPS Based, CV/CC, 2 L.E.D. Meters of 4 Digits, Slim Design. Fine & Coarse Control. With PC Interface Current Pre-Set Facility.

5020 SR / 5030 SR

5020 SR: 0~50V, 0~20A. 5030 SR: 0~50V, 0~30A. SMPS Based, CV/CC, 2 L.E.D. Meters of 4 Digits, Slim Design. Fine & Coarse Control. With PC Interface Current Pre-Set Facility.

6010 SR / 6020 SR

6010 SR: 0~60V, 0~10A. 6020 SR: 0~60V, 0~20A. SMPS Based, CV/CC, 2 L.E.D. Meters of 4 Digits, Slim Design. Fine & Coarse Control. With PC Interface Current Pre-Set Facility.

10010 SR

0~100V, 0~10A. SMPS Based, CV/CC, 2 L.E.D. Meters of 4 Digits, Slim Design. Fine & Coarse Control. With PC Interface Current Pre-Set Facility.

12005 SR

0~120V, 0~5A. SMPS Based, CV/CC, 2 L.E.D. Meters of 4 Digits, Slim Design. Fine & Coarse Control. With PC Interface Current Pre-Set Facility.

15003 SR

0~150V, 0~3A. SMPS Based, CV/CC, 2 L.E.D. Meters of 4 Digits, Slim Design. Fine & Coarse Control. With PC Interface Current Pre-Set Facility.

6010 S / 10005 S

6010 S - 60V/10A, 10005 S - 100V/5A. SMPS Based, CV/CC, With 2 L.E.D. Meters.

20005 S

0~200V, 0~5A, 1000 W. SMPS Based, CV/CC, With 2 L.E.D. Meters.

3005-3 D2

Multi O/P: 0~30V, 0~5A Dual With 5V/3A Fixed O/P, CV/CC, 4 L.C.D. Meters With B/L. * 5V/3A is Fixed O/P & Non CV/CC, Linear.

3005-4

Multi O/P: 0~30V / 0~5A Dual, Linear. 2.2~15V/1A Dual - Total 4 O/P CV/CC, 4 L.E.D. Meters, O/P On/Off Switch.

3010-2 / 6005-2

3010-2: 0~30V, 0~10A, Dual O/P, Linear. 6005-2: 0~60V, 0~5A, Dual O/P, Linear.

PPS 3005-3

Programmable LINEAR, Multi Output 0~30 V, 0~5 A DUAL 2.5 / 3.3 / 5 V - 3 A Fixed CV/CC, With 4 Dual Colour L.E.D. Displays, with USB Interface, Linear.

3010 S-2

0~30V, 0~10A, Dual O/P, SMPS Based, CV/CC, With 2 L.E.D. Meters.

D.C. ELECTRONIC LOAD

EL-600: 600W, 150V Max / 60A Max. EL-600+: 600W, 150V Max / 120A Max.

A.C. Power Supplies

Programmable AC Power Source

Single phase & 3 Phase Programmable models. High precision. Frequency can be varied up to 400 Hz depending on the model. RS232 or RS485 interface for remote control. Variable output frequency from 45 Hz to 400 Hz. Fast response time and soft start function. 3 Memory keys and panel lock function for easy operation. Strong over load load capacity and multiple protections, which makes it a flexible and durable AC power source for industrial production and R&D.

VARIANTS: 500VA, 1kVA, 2kVA, 3kVA, 5kVA, 6kVA, 10kVA, 15kVA, 20kVA, 30kVA to 800kVA.

Calibrators

MS 7221

V/mA CALIBRATOR: DIGITAL, 4 ½ Digits, Source / Measure DC mA / DCV: 0 ~ 24 mA / 0 ~ 10 V, 0.015% DC mA / 0.02% DCV Accuracy.

V 7220 R

Digital TEMP. Calibrator: 5 Digits, Source & Measure DCV, Resistance (Ohms), T/C (Various Types) & RTD (Various types – 2W / 3W / 4W), A.P.O., On/off Detection, Torch with Backlight.

V 7221 B

Digital Loop Calibrator: 5 Digits, Source DC Current (0 ~ 30 mA). Measure DC mA & DCV (+/- 35 mA / 35 V), Span, Sawtooth / Triangle Wave, Torch with Backlight.

Oscilloscopes Etc.

SS-5020 B / SS-5030 B

Model: SS-5020 B (20 MHz) & SS-5030 B (30 MHz) Dual Channel Oscilloscope (C.R.O.), 5 mV - 5 V Vertical Sensitivity. Also Available: SS 5030 BC (30 MHz with Comp.Test).

SS-5050 DS / SS-5100 DS

SS-5050 DS: 50 MHz D.S.O., SS-5100 DS: 100 MHz D.S.O., 1 mV ~ 20 V / Div., 500 MS/S, 7" TFT, USB Interface.

SS-5100 DS1B

100 MHz D.S.O., 1 GS/S, 2 mV ~ 10 V / Div., 7" TFT, USB Interface.

SS-5150 DS1B FG

150 MHz D.S.O., with Function Generator (25 MHz) 1 GS/S, 2 mV ~ 10 V / Div., 7" TFT, USB Interface.

SS-5080 DS4

80 MHz D.S.O., 1 GS/S, 4 channels 500 μV ~ 10 V / Div., 7" TFT, USB Int.

SGD-6M

FUNCTION GENERATOR: Signal Generator with Counter. (DDS, FUNCTION), 6 MHz Dual, 16x2 LCD B/L Display with USB Interface & 16 Arbitrary Waveforms.

SGDA-15M (15 MHz)

DDS Signal Generator/Counter: Signal Generator with Counter. (DDS, FUNCTION), Dual Channel, 2.4" TFT Color LCD Display, with USB Interface & 60 Arbitrary Waveforms.

SGDA-30M (30 MHz)

DDS Signal Generator/Counter: Signal Generator with Counter. (DDS, FUNCTION), Dual Channel, 2.4" TFT Color LCD Display, with USB Interface & 60 Arbitrary Waveforms.

SGDA-80M

FUNCTION GENERATOR: Signal Generator with Counter. Programmable (DDS, FUNCTION), 80 MHz Dual, 3.5" TFT Color LCD Display, with USB Interface.

Also Available: SGDA-60M, 60 MHz Dual Channel

For all F.G.s : POWER AMP. MODULES Available - 2 Ch. & 100 KHz / 10 MHz.

Soldering & S.M.D. Stations

936 A

Soldering Station: 60 W / 24 V, Temp. Controlled, 200~480 °C, Detachable 50 W Soldering Iron. •Most Popular & Reliable Work Horse•

936 AD

Soldering Station: 70 W / 24 V, Digital Temp., Control, 100~480 °C, With LED display, Password control, Three channel memory storage for temperature. Digital temperature calibration.

937 ESD

Soldering Station: 60 W / 24 V, Digital Temp., Control, Ceramic Heater, 200~480 °C, With Key Card. Detachable 50 W Soldering Iron, Heavy Duty.

236 ESD

Soldering Station: 90 W, LEAD FREE, Digital T/C, 80~480 °C. Heavy Duty. •Most Popular Lead free Soldering station•

202 D

Soldering Station: 80 W / 36 V, LEAD FREE, Digital T/C, 80~480 °C. PID temperature control. Heavy Duty. Sensor at the tip which ensures high temperature accuracy & stability. •Intelligent Lead free Soldering station•

S.M.D. RE-WORK SYSTEMS

850 A

S.M.D. RE-WORK SYSTEM: 270 W / 220 V, Temp. Control, 100~420 °C. Auto Cooling System. Most Popular & Reliable Work Horse.

857 D

S.M.D. RE-WORK SYSTEM: 580 W / 220 V, Digital Temperature Control, 100~450 °C. Auto Cooling System, Auto Sleep Function.

850 D

S.M.D. RE-WORK SYSTEM: 320 W / 220 V, Digital Temp. Control, 100~480 °C. Auto Cooling System, Auto Sleep Function, Soft Touch Keys. Heavy Duty.

861 DW

S.M.D. RE-WORK SYSTEM: 1,000 W / 220 V, Heavy Duty. Intelligent System, 100 ~ 500 °C, Lead Free. High Resolution LCD Digital Display, Soft Touch Keys.

700

2-in-1 (S.M.D Re-Work & Soldering), Heavy Duty. 270 W / 220 V & 50 W (Soldering), Temp. Controlled. 100 °C ~ 420 °C (S.M.D) & 200 °C - 480 °C (Soldering).

706

2-in-1 (S.M.D Re-Work & Soldering). 580 W / 220 V & 50 W (Soldering), Digital Temp. Control. 100 °C ~ 450 °C (S.M.D) & 200 °C - 480 °C (Soldering).

853

B.G.A. RE-WORK SYSTEM: PRE-HEATER FOR B.G.A. RE-WORK SYSTEM, Rapid heating, only 10s to reach 250 °C. The preheater can be used with rework stations to process BGA or other flake ICs. Model 800 L Fixture for B.G.A Re-Work System which can hold PCBs for B.G.A Re-work.

885

Hot Air Gun: 2100W/220V, 50~650 °C, 400 L/m Max., With 3 Digits LCD Display, Heavy Duty.

De-Soldering Tools & Magnifiers

201 B

De-Soldering Tool: 90 W, LEAD FREE, For PTH Components. Temp. Controlled, 200~480 °C, Digital Display. Heavy Duty.

722

2 in 1 Station: 90 W / 12 V, Temperature Controlled LEAD FREE Soldering & DE-SOLDERING (For PTH Components). 200~480 °C, Digital Display.

268 L

MAGNIFIER LAMP: 90 mm Dia., Round Lens With Lid, Tiltable, Folding Arms, 6 W LED. Mag. x3 (Main Lens) & x12 (Built-in small lens).

8093 CFL

MAGNIFIER LAMP: 100 mm Dia., Round Lens With Lid, Tiltable, Folding Arms, 12 Watts, 220 V AC. Mag. x3 (Main Lens) & x12 (Built-in small lens).

8093 LED

MAGNIFIER LAMP: 100 mm Dia., Round Lens With Lid, Tiltable, Folding Arms, 60 Pcs., L.E.D., 6 W 220 V AC. Mag. x3 (Main Lens) & x12 (Built-in small lens).

228 L

MAGNIFIER LAMP: 125 mm Dia. Round Lens, 9 W L.E.D., 5 & 8 Diopter Mag., Table Clamping, With Folding Arms, 220 V AC. Also Available: 228 L II with external arm springs.

228 AL

MAGNIFIER LAMP: 125 mm Dia. Round Lens, 9 W L.E.D., x5 Mag., With Vertical Rod, Heavy Metal Base, 220 V AC.

228 BL

MAGNIFIER LAMP: 125 mm Dia. Round Lens, 9 W L.E.D., x5 Mag., Desk Top, With Folding Arms, Heavy Metal Base, 220 V AC.

Soldering Irons & Consumables

Soldering Irons

25W / 30W / 50W 2 Pin Soldering Iron, 220V

60W / 80W / 100W 2 Pin Soldering Iron, 220V

989 S.M.D Hot Tweezer

Optional Accessory for use with Models 936 ESD or 937.

493 ESD

SMOKE ABSORBER: Bench Top, 16 W / 220 V, ~1Cu.M/Min. With Activated Carbon Filter.

Soldering Tips

Various Types of Tips Available: Pointed, Chisel, Spade & Knife.

S.M.D. Nozzles

Various Types of Nozzles Available.

Tip Cleaning Sponges

Approx. 2" x 3", Approx. 3" x 3". Any other Size or Sheets Available.

Also Available: Various Other Models / Items of Electronic Tools & All Spare Parts / Consumables (Like Barrels, Nuts, Heating Elements, Handles Etc., Etc.) for all these.

Quality • Reliability • Economy

PDF preview unavailable. Download the PDF instead.

V A R TECH Catalogue 2025 August Adobe PDF Library 17.0 Adobe InDesign 20.5 (Macintosh)

Related Documents

Preview VAR TECH Programmable DC Power Supply PPS-S Series: Features & Specifications
Detailed overview of the VAR TECH PPS-S Series Programmable DC Power Supply, highlighting key features, technical specifications, and model variations for precision power control.
Preview VAR TECH Slim D.C. Power Supplies 3005 S, 3010 S, 6005 S - Technical Specifications
Detailed specifications and features of VAR TECH's Slim D.C. Power Supplies, including models 3005 S, 3010 S, and 6005 S, designed for performance and reliability in education and electronics industries.
Preview VAR TECH V 92 S Digital Multimeter - True RMS, Auto Ranging Specifications
Explore the comprehensive specifications of the VAR TECH V 92 S Digital Multimeter. This advanced device features a 3 5/6 digit (6000 counts) display, True RMS measurement, Auto Ranging, NCV detection, Data Hold, and a built-in torch. Ideal for professionals and hobbyists requiring precise electrical measurements.
Preview VAR TECH 706 ESD 2-in-1 SMD Rework Station Specifications
Detailed specifications for the VAR TECH 706 ESD, a 2-in-1 Soldering and SMD Rework Station featuring a Japanese soft air DC fan, including power consumption, temperature ranges, and resistance values.
Preview VAR TECH 8093 LED & 8093 CFL Magnifier Lamps - Features and Specifications
Detailed overview of VAR TECH's 8093 LED and 8093 CFL magnifying lamps, highlighting features like adjustable design, clear optics, and suitability for electronics, medical, and beauty applications. Includes technical specifications.