Instruction Manual for LOVMOR models including: W2436GD-E Wall Cabinet, W2436GD-E, Wall Cabinet, Cabinet
LOVMOR, S-SD-W2436GD-DF, Shaker Dove : Home & Kitchen
Wall Cabinet Instruction Manual MODEL: W2436GD-E W2736GD-E Glass Is Not Included C BOX BACK PANEL A1 BOX SIDE PANEL - LEFT L BOX TOP PANEL A2 BOX SIDE PANEL - RIGHT D FACE FRAME K ADJUSTABLE SHELF PART A1 A2 B C B BOX BOTTOM PANEL DESCRIPTION Box side panel - left Box side panel - right Box bottom panel Box back panel PART D J K L J J DOOR PANEL DESCRIPTION Face frame Door panel Adjustable Shelf Box top panel CAUTION Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them. The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly. Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended. Do not tighten all the screws until all the adjacent parts have been properly connected. Please do not throw away extra screws.Please refer to the actual product for the screw hole position. HARDWARE CONTENTS CC Soft-close hinge x 4 Be careful the length of the screws. 3/4" 1/2" Included: 1/2" Flat Head Phillips Screw x 8 3/4" Round Head Phillips Screw x 4 EE Corner brace x 16 1/2" Included: 1/2" Round Head Phillips Screw x 64 FF Adjustable shelf clip x 8 GG 1" Flat head Phillips screw x 6 HH Rubber bumper x 4 TOOLS REQUIRED (NOT INCLUDED) - 1 - INSTALLATION OVERVIEW 1 EE A1 Use 1/2" round head phillips screw x 10 2 EE A2 Use 1/2" round head phillips screw x 10 3 4 A2 C C A2 A1 - 2 - 5 B 6 L 7a 7b LL A2 C A1 EE Top L A2 C A1 Use 1/2" round head phillips screw x 12 8a 8b A1 Bottom C B A2 EE B A1 C A2 L Use 1/2" round head phillips screw x 12 - 3 - 9 10 CC A2 GG L A1 D 1" Flat head Phillips screw x 6 B 11 AA22 D EE A1 Inside C LL Use 1/2" round head phillips screw x 14 12 D EE A1 B C Bottom A2 Use 1/2" round head phillips screw x 2 13 14 K FF Adjustable shelf clip x 8 - 4 - 15 CC Use 1/2" flat head phillips screw x 4 16 J CC 3/4" Round Head Phillips Screw x 4 Some products may have hinges pre-installed. If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge. 17 HH HH x4 18 - 5 - Left Stile GLASSDOOR CUTOUT SPECIFICATIONS Top Rail Bottom Rail Right Stile Height Configuration: Door Height* - (2 x Door Style Rail Width) + 1½" Width Configuration: Door Width* - (2 x Door Style Stile Width) + 1½" Door Style Rail Width Shaker Traditional 2 ¾" 3" Cameo 3" Stile Width 2 ¾" 3" 3" *Door height and width information is located in the Specification Manual. DISCLAIMER: This formula is to be used as an estimation tool only.We recommend that physical measurements are taken prior to ordering your inserts.We cannot guarantee the exact dimensions determined when using the formula provided. Dear customers, Thank you for purchasing our product. If you require assistance, please contact the customer service team at the retailer where you purchased the product. The customer service team will be happy to assist you. - 6 -Adobe PDF library 16.03 Adobe Illustrator 26.0 (Windows)