XG23PRO Wireless Smart Headphones

70mmX90mm

Product Parameters

Product Name: XG23 PRO
Bluetooth Version: 5.4
Transmission Distance: ≥10M
Speaker Diameter: Φ13mm
Charging Port: Type-C
Sensitivity: 128±3dB
Charging Case Battery: 3.7V 200mAh
Headphone Battery: 3.7V 40mAh
Charge Time (Charging Case): 1.5-2H
Charge Time (Headphones): 0.8H
Playback time (headphones): 6H
Standby time (headphones): 30H (No connection)

Operating Instructions

Please read the instruction manual in advance to facilitate subsequent use.

1. Switch on/off

Switch on: 1. Remove the headset from the charging compartment and turn it on automatically. 2. Long press the headset touch button for 3S. (Headphone tone: TONE tone; Indicator light: White and green lights flash alternately)

Switch off: 1. Place the headset into the charging compartment to automatically switch off charging. 2. Long press the headset touch button for 5S. (Headset tone: TONE tone; Indicator light: white light on 3 times, then off)

2. Headphone Wearing

1. Remove the headset from the charging compartment.

2. Wear your headphones in the correct direction.

3. Finish wearing.

Note: The above wearing styles are only recommendations and can be worn comfortably according to your own habits.

3. Bluetooth Pairing

1. Open the headphone compartment and remove the headphones inside.

2. With the headset switched on, turn on your mobile phone's Bluetooth and search for the device name: XG23PRO.

3. Click on the Bluetooth name. When it shows 'Connected', the connection is successful.

4. Mode Selection

The red area indicates the touch area.

Telephone Mode:
- Incoming call: Click to answer, then click to hang up.
- Reject call: Long press for 2s.
Music Mode:
- Single touch: Play/Pause.
- Double-touch in the left ear: Play the previous song.
- Double-touch in the right ear: Play next song.
In-ear mode:
- Three touches on the left ear: Volume down.
- Three touches on the right ear: Volume up.
- Switch on: Long press 3S.
- Switch off: Long press 5S.
- Wake up SIRI: Long press either ear for 2s.

Important Notes and Warnings

Attention:

1. Please read this instruction manual carefully before using the product and keep it in a safe place.
2. Please fully charge the product for the first time use.
3. If the product is not used for a long time (more than 1 month), please charge it.
4. If your mobile phone cannot search for the Bluetooth headset, please ensure the Bluetooth headset is in the 'pairing state'. If there is no pairing or connection for a long time, the Bluetooth headset pairing function will be turned off; please turn on the Bluetooth headset again to the 'pairing state'. If there is an error in the mobile phone program, please restart the mobile phone. If there is an error in the Bluetooth headset program, please restart the Bluetooth headset.

Warnings:

1. Do not dismantle or modify the headset for any reason, as this may result in fire, breakdown of electronic components, or even complete damage to the product.
2. Do not expose the device to temperatures that are too low or too high (below 0°C or above 45°C).
3. Avoid using the indicator light near the eyes of children or animals.
4. Do not use the device during thunderstorms, as this may cause the device to operate improperly and increase the risk of electric shock.
5. Do not wipe the product with oil or other volatile liquids.
6. Do not expose the device to liquids.

Warranty Description

Dear customer, thank you for purchasing our products. To ensure your interests, please read the instructions and the following content carefully after purchasing this product:

Note: The following circumstances are not covered by the warranty. The company can provide paid services.

1. Failure and damage resulting from not operating, using, or storing the product according to the instruction manual.
2. Unauthorized graffiti or tearing of the product packaging and barcode.
3. Unauthorized changes to factory settings or dismantling for repair.
4. Accidental factors or human-induced damage to the product, such as input of unqualified voltage, high temperature, water ingress, physical damage, serious oxidation, or rust.
5. Failures and damage caused by irresistible forces, such as earthquakes, fires, floods, or lightning strikes.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.