Instruction Manual for TRACERLRF models including: 35-50LRF, 25-35LRF Pro, 35-50LRF Thermal Imaging Scope With Laser Range Finder, 35-50LRF, Thermal Imaging Scope With Laser Range Finder, Imaging Scope With Laser Range Finder, With Laser Range Finder, Laser Range Finder, Range Finder, Finder
ТепловизионнÑе монокÑлÑÑÑ Conotech Tracer | Telescope1.ru
File Info : application/pdf, 23 Pages, 2.71MB
DocumentDocumentTRACER thermal imaging scope with laser range finder Attention! Export of Tracer 35/50LRF, Tracer 25/35LRF Pro models. May have export limitations depending on the laws in your region. RoHS ATTENTION! The proper usage of the device is important for safe exploitation! Therefore read carefully the present manual! If the device was left in storage for a longer period of time, before exploitation check its funtionality. Disassembling of the device is prohibited,except in authorized repair centers. The external optical surfaces should be clean at all times.Touching the optical surfaces with bare hands is not recommended. Sand and sea water can damage the optical coatings! Do not point the device directly at the sun! Image performance is dependent on scenery and atmosphere conditions. Contrast in the same image may vary as a function of the time of day due to the effect of the sun.For example,at sunset objects will have absorbed different levels of heat resulting in greater temperature differences and better contrast. When left in storage for a longer period of time,batteries have to be removed and stored in polyethylene bags to prevent contact with metal.(It is recommended to recharge the batteries every two to three months) ATTENTION! When carrying or transporting the device,put the protective lens cap! Condensation can cause fogging of the optical surfaces! Condensation occurs when the temperature or humidity changes as follows: · When moving the device from cold to warm place or vice versa; · In places with high humidity. When equalizing the temperature of the device with the environmental, the condensation disappears.Use the towel to remove moistu Clean the lens surfaces with the Lens Cloth or with the napkin! Before attaching to weapons,check the regional legal regulations in the area of application. The attachment to a weapon is always the sole responsibility of the user. APPEARANCE All images used in this instruction manual are for illustrative purpose only. NOTE Actual product may vary due to product enhancement. 2 Focus ring 1 Lens cover 8 Wrist band joint 3 Button 4 LED indicator 5 Eyepiece 6 Power Button 7 USB port 9 Laser rangefinder CLASS 1 LASER PRODUCT BS/EN 60825-1:2014 1 STATUS DISPLAY BH 2.7 x pallete / zoom out nuc /menu media mode / zoom in single measurement mode / scan mode 100% A The status display shows information on the actual operating status of the device including: Palette ( RB, CG, GB, RH, WH, BH) Zoom (35---10.8X, 50---15.6X, 25P ---9.6X, 35P ---13.2X) Help menu Battery capacity Wifi Display modes (A-D) NUC mode BH 2.7 x WIFI up ok/exit down 100% A Main menu settings icon 2 BUTTON Quick menu Short press Long press Palette Zoom - Main menu Short press Long press Up / M NUC Enter menu / Exit menu / Confirm settings Enter menu / Exit menu/Save / Media mode Zoom + Down / Singe measurement Scan mode switching / / Stand-by Turn on / Turn off Stand-by Turn on / Turn off M / Adjust Brightness / / M / Adjust Contrast / / 3 QUICK OPERATION GUIDE Start up image Long press of button for 3 second to power on device. Power off image Long press of button for 3 seconds to power off device. P ... 4 Palette Press button shortly to switch palette from RB, CG, CB, RH, WH, BH. BH 2.7 x WH 2.7 x GB 2.7 x 100% 100% 100% BH--Black Hot WH--White Hot CG 2.7 x RH 2.7 x RB GB--Glowbow 2.7 x 100% CG--Cold Green 100% RH--Red Hot Zoom Long Press or to have smooth zoom in and out. 100% RB--Rainbow BH 2.7 x 100% A Tracer 35LRF has magnification from 2.7~10.8X. Tracer 50LRF has magnification from 3.9~15.6X. Tracer 25LRF Pro has magnification from 2.4~9.6X. Tracer 35LRF Pro has magnification from 3.3~13.2X. 5 NUC Short press button to act non-uniforming calibration. T / v b Short press button, to have multimedia menu display. BH 2.7 x exit 100% A Short press button,to take photo,number of photo will be shown on bottom screen. Short press screen. button, to start/end video recording, recording icon will be shown on bottom Press button to exit Media mode. BH 2.7 x BH 2.7 x pallete/zoom out nuc/menu exit/zoom in photo/zoom out nuc/menu exit/zoom in 100% A 00:00:00 100% A 000 P f bf When you take photos, do not press too quickly, always wait until 001disappears before you take 002. Please avoid taking photo or videos when device connects with PC. Or else photos or videos are not saved properly. 6 T by CONOTECH User can take photo / video by CONOTECH App. Replay on Smart phone. To get started, install the free CONOTECH App on your mobile device. You can search and download at App Store and GooglePlay. CONOTECH 7 H y PC ? 1.Connect the Type-C usb cable to PC. 2.Turn on WIFI and wait 10s. You will see a folder name "camera". Open this folder. A new folder is created each time when you re-power on the device and take photo/record video. Open the folder you will see phots / videos that you took. 8 L fi Short press the button, the ranging box and distance appear. BH 2.7 x single measurement mode 100% --- m long press to switch to scan mode A Short press the button to have range measured once and displayed. BH 2.7 x single measurement mode 999 m 100% A The distance is displayed for 5 seconds then disappear. 9 Long press button to start the scan mode, and the scan mode ranging box and distance appear in the real-time image. Long press button again to turn off the scan mode. The ranging box and figures will disappear together. BH 2.7 x 100% --- m long press to exit scan mode A OPERATING FEATURES: 1.The accuracy and distance of the measurement depends on the reflection coefficient of the object surface and weather conditions. The reflection coefficient depends on the texture, color, size and shape of the object. Generally, lighter colored objects and those with a shiny surface will have a higher reflection coefficient. 2.Measurement accuracy can be influenced by the light conditions, fog, haze, rain, snow, etc. The results may be less accurate when operating in sunny weather or if the rangefinder is directed towards the sun. 3.It is easier and more reliable to measure the distance to large objects than to small ones. 4.The distance of measurement is able to display on your mobile device by CONOTECH App. 10 MAIN MENU When under real time image,long press the M Button to Enter /Exit the main menu. NOTE Press the M Button to enter Sub-menu/Save. Press the Up/Down Button to select between the menu options. BH 2.7 x WIFI up ok/exit down 100% A Wi-Fi Find Wi-Fi icon from Main menu Press or button to choose then press button to turn ON/OFF Wi-Fi. Wi-Fi status is shown in the display, means Wi-Fi is off, means Wi-Fi is on. Find WIFI named: Tracer LRF ****** Tracer LRF ****** 11 Tracer LRF *** Tracer LRF ****** Enter password: 12345678 After wait for 10s PIP Mode Press the or button then press button to turn PIP Mode O / Off. BH 2.7 x 100% A 12 Display setting BH Display modes up ok/exit down 100% A Display modes: A ... Normal B ... Booster 2.7 x 13 User mode BH Brightness up ok/exit down 2.7 x 100% Brightness Press the or buttons to change image brightness from 1~5. You can also enter Brightness adjustment by long press both and buttons in the real image. Contrast Press the or buttons to change display contrast from 1~5. You can also enter Contrast adjustment by long press both and buttons in the real image. Sharpness Press the or buttons to change sharpness from 1~5. OLED Press the or buttons to change Brightness OLED brightness from 1~5. 14 Cb BH 2.7 x Auto NUC up ok/exit down 100% A Auto NUC Press the or button then press button to turn Automatic Calibration O / Off. In the Automatic Calibration mode ,The device is calibrated autonomously according to firmware algorithms. There is no need to close the lens cover. Manual Calibration Press buttons, prompt to close the lens cover, and complete after counting down 3-2-1. Defective Pixel Repair Press buttons, prompt to close the lens cover, and complete after counting down 3-2-1. Defective pixels are found by software algorithm. 15 System setting BH Unit up ok/exit down 2.7 x m yd 100% A m yd Unit Press or to select units of measurement from Yards and Meters, then press button to confirm. Language Press or to select language, then press button to confirm. Help Press the or button then press button to turn help O / Off. Reset the factory setting Press or will be default) buttons to Restore Default Setting.(All your parameters BH Reset the factory setting, All your parameters will be Default! up ok/exit down 2.7 x m yd yes 100% 16 CHARGING AND FIRMWARE UPDATE T T LRF b- b L- by. Bf fi , by fy . Power supply / Firmware update When charging the LED light will be in red color. When battery is fully charged LED light will be in green color. Attention It is not recommended to use when charging, which will shorten the battery life. Charging batteries from an external source at temperatures below 0°C can reduce battery life. When using external power, connect the Power Bank to the device only after it has been turned on and working for at least several minutes. 17 STORAGE AND TRANSPORTATION Before storing it, clean obligatory the device (if on its surface there are moisture, dust or traces of dirt)! Make sure that there are no traces of moisture, and the battery compartment is empty! It is also possible for a short periods of time device to be stored in a suitable soft pack, bag or cartridge box. The premises in which the device is kept for long term have to be dry, enclosed, unheated and ventilated. During the storage should not be allowed exposure to aggressive environments, temperatures below -50°C and above +60°C, relative humidity greater than 80%, and prolonged periods of direct sunlight. Before each transportation, the product should be neatly packed in its original packaging (transport bag) and all other items and accessories should be carefully and steadily placed in the bag. After that the bag should be steadily placed in the transport suitcase. You can ship the product with all types of transport at different distances and at altitude up to 12 000 m. 18 Detector Type Resolution Frame rate Pitch Spectral range NETD Optical Characteristics Objective lens Magnification FOV Close-up range Dioptre adjustment Functions Zoom Palette Start up time Image enhancement Contrast and brightness Online update Display Type Resolution Power Supply Battery External power supply Battery life Physical Characteristics Weight without battery Size Physical Characteristics Water proof Operating temperature Storage temperature Physical Characteristics Safety class for laser equipment according to IEC 60825-1:2014 Measuring range Measurement accuracy Technical Data Sheet Tracer 35LRF Tracer 50LRF Uncooled Vox 384×288 50Hz 17m 8-14m 30mk 35mm 2.7x 10.6°×8.0° 5m -5D-4D 50mm 3.9 x 7.4°×5.6° 1X/2X/4X 6 optional(can be customized) Less than 5 seconds DDE AGC Both code and GUI resources OLED 1024×768 Built-in lithium battery 5V Type-C 8h+ 540g 155x50x92mm 590g 165x56x92mm IP67 -20-50 -40-60 Tracer 25LRF Pro Tracer 35LRF Pro Uncooled Vox 384×288 50Hz 12m 8-14m 30mk 25mm 2.4X 10.6° X 7.9° 5m -5D-4D 35mm 3.3X 7.5°×5.7° 1X/2X/4X 6 optional(can be customized) Less than 5 seconds DDE AGC Both code and GUI resources OLED 1024×768 Built-in lithium battery 5V Type-C 8h+ 530g 153X50X92mm 540g 155x50x92mm IP67 -20-50 -40-60 1 5-1000m ±1m 1 5-1000m ±1m 19 Hubei CONO Technology Co., Ltd Tel/ Fax:0086-27-87137247 Email: Support@cono-tech.com www.cono-tech.com