Official Roberts Radio Online Shop | British Audio
User Guide for Roberts models including: Stream 67L, Smart Radio Sound System, Radio Sound System, Smart Radio Sound, Radio Sound, Sound System
Stream 67L Benutzerhandbuch – Roberts Radio Product Support
Stream 67L User’s Guide – Roberts Radio Product Support
File Info : application/pdf, 2 Pages, 1.38MB
DocumentDocumentWhat is in the Box? Smart Audio System, mains lead, remote control with 2 x AAA batteries, quick start guide, safety/warranty guide. Please scan the QR code on the product for the FULL User Guide online. Features · Internet / DAB+ / FM radio · Streaming: Spotify, Deezer, Amazon Prime music · Bluetooth · CD, CD MP3 / CD WMA compatibility · Play MP3 or WMA files via USB · Two mid-treble speakers, two bass speakers (with ported chambers) · Control via the UNDOK smartphone app (for Apple iOS and Android) · 10 DAB, 10 FM presets and 40 Internet radio presets · WiFi and Ethernet connection (Dual-band WiFi and Ethernet) · 5 equaliser profiles plus User EQ mode · Clock and dual alarm (wake to Radio / CD / buzzer) · USB charging of smartphone, tablet or similar devices · Auxiliary input and headphone socket for private listening Scan for full instructions. Controls 23 45 6 1 12 11 10 9 8 7 13 14 18 17 16 15 18 27 AC In 100-240V ~ 50Hz / 60Hz 66W 23 26 25 DAB/FM Antenna 24 WiFi Antenna 22 Ethernet 21 20 Aux In 19 5V 1A 27 26 1 Volume 15 IR sensor 2 Repeat / Shuffle 16 Display 3 Previous (RW) 17 CD slot 4 Play/Pause / BT Pair 18 Mid treble speakers Select 5 Next (FF) 19 USB playback / charge 6 Stop / Eject 20 Auxiliary input 7 Tuning / Select / Snooze 21 Headphone socket 8 Back 22 Ethernet socket 9 Menu 23 Power input 10 Preset 24 DAB / FM telescopic aerial 11 Info / Dimmer 25 WiFi antenna 12 Alarm 26 Sub-bass speakers x 2 13 On / Standby / Sleep 27 Bass reflex ports x 2 14 Mode 28 Remote control 28 STEP 1 - Connect to the mains & setup your smart audio system Before you can use your smart audio system you need to have the following: · For FM/DAB: A suitible location for good radio reception · For Streaming / Internet Radio : a good WiFi signal or ethernet connection (802.11b, g, n or a) connected to your broadband Internet service provider. You will need the security details to connect the Stream67L to your WiFi network. Password will not be required for a wired connection. · For App control: An Android or Apple device with the UNDOK app installed. A - Connect to the mains Please read the safety leaflet provided before connecting your smart audio system to the mains. The mains plug is used as the disconnect device, The socket-outlet shall be installed near the equipment and shall be easily accessible. 1 Place your audio system on a flat surface. 2 Plug the mains lead into the mains socket on the back of the unit. 3 If you wish to use a wired connection, plug the Ethernet cable into the socket at the back of the unit. 4 Plug the mains lead into a wall socket and switch on the socket. AC In 100-240V ~ 50Hz / 60Hz 66W 5 The display on the audio system will show a start up screen for a few seconds. If this is the first time that you use your audio system (or after a Factory Reset) the display will show the language menu. B - Setup using the audio system or the UNDOK app Your audio system may be configured using either the display and buttons on the unit or using the UNDOK app. First-time users are recommended to use the audio system's controls. 1 If you wish to use UNDOK to setup your unit, skip to step F now. 2 If you would like to setup using the audio system's controls follow the setup procedure below and choose the desired language. C - Select language By default your audio system will display all menus and messages in English. 1 Rotate the Tuning/Select control to highlight the desired language. 2 Press the Tuning/Select control to enter the selection. Language English * Dansk · Your audio system will display a privacy policy. Please read the privacy policy and then press the Tuning/Select control to accept Nederlands Français Deutsch the policy. Italiano D - Select clock and time settings Setup wizard 1 The audio system will show a setup wizard. With `YES' highlighted press the Tuning/Select control to begin setting up your product. · Note: If you wish to go back within a menu or if you make an error at any time, please use the Back button. 2 Choose either the 12 or 24 hour clock display. Start now? Date/Time 12/24 hour format 3 A menu allowing you to specify the auto-update option for the clock will be shown. Update from network will be the best for most users. 4 Choose the timezone for your region. Auto update Update from DAB Update from FM Update from Network * 5 Choose a daylight saving option. This is also known as Summer/ No update Winter time (or BST/GMT in the UK). E - Connect to your network To stream music or listen to radio from the Internet you must connect your system to your WiFi or use a wired network connection. The Network setup process allows you to do this: 1 Choose `YES' to keep the unit connected to the network when in Standby. This will allow remote control software to switch on your audio system when needed. 2 A list of the available WiFi networks will then be displayed. If no networks are found then your audio system may be too far from your router. Network settings Keep network connected? * 3 Rotate the Tuning control to navigate the list of available networks and highlight your own Network Name. If your Network Name is not found, then check the router is functioning and that the audio system can in good signal range. Network settings Network wizard Scanning... 4 If your Network Name (sometimes called SSID) is displayed with "[WPS]" (WiFi Protected Setup), then press the Tuning control and a WPS menu will be displayed, otherwise press the Tuning control and proceed to step 6. 5 Choose one of the WPS menu options as required for your router (WPS may be via push button, or using an identification number): `Push Button' - the display prompts you to press the WPS button on your router and then the Tuning control on the unit. The two devices should then connect automatically. Proceed to step 10. SSID Jones family [WPS] Paul's network Smith Brown [Rescan] [Manual config] WPS Menu Push Button PIN Skip WPS `PIN' - the display shows an identification number which you must enter into your router using a web browser (refer to your router's user documentation). You should then press the Tuning control on the unit. Proceed to step 9. `Skip WPS' if you wish to enter your password or if your password was previously entered. 6 If you are prompted to enter a password (or key), enter each character by rotating the Tuning control to highlight it, then pressing the Tuning control. If you are not prompted for a password then proceed to step 9. 7 The three controls on the right-hand side of the password key screen have special functions. You can quickly access these by pressing the Info button and then using the Tuning control as needed: Select `BKSP' - Select to erase a character (long press to clear). Select `OK' - When the complete password has been entered. Select `CANCEL' - To cancel and re-run the Network Wizard. 8 After the final character of the password has been entered, highlight the `OK' symbol and press the Tuning control. Key: 123-jones 0 1 2 3 4 5 6 789. _-@ , abc de f ghi j k l m n o pq r s Network settings Please wait Connecting... Setup wizard Setup wizard completed 9 The screen will show `Connecting..' and then `Setup wizard completed'. Press the Tuning control to exit the setup wizard. The audio system should now be able to connect to the network. Your audio system will display the Main mode menu. Press `SELECT' to exit F - Use the UNDOK app to setup your audio system 1 If you wish to setup your audio system using the UNDOK app download and install the UNDOK app on to your Android or iOS device. 2 Follow the on-screen instructions or see the full user guide on-line (scan the QR code on this documnet with your phone). · If you already have the UNDOK app installed on your device ensure that you have the latest version. STEP 2 - Navigating your smart audio system Remote Control System Buttons Select A short press will switch your audio system On or to Standby. A long press will access the sleep timer (on the unit) when playing. A short press will cancel an active alarm. A short press will access each operating mode in turn. Turn the tuning dial to skip through the modes more quickly. A short press will access or exit the current menu system. Rotate clockwise or anti-clockwise to scroll menu items or Left / Up / Right / Down buttons on remote control. A short press on Tuning/Select or the select button (remote control) will select highlighted menu items. A short press on Tuning/Select or the select button (remote control) will access snooze when an alarm sounds. Press the Back button (or menu on remote) to go back to a higher level menu or if an error is made. A short press will display information relating to the music being played. Long press to adjust the brightness of the display (short press when in standby to adjust brightness). A short press will change alarm status when the unit is in standby or playing. A long press will access alarm settings when the unit is in standby or playing. STEP 3 - Operating your smart audio system Select music mode Select Choose a listening mode: 1 Pressing Mode gives you access to each of the operating modes. Press again or turn the select control to select a new mode. Push the tuning dial to select a mode and return to the main screen. 2 Press Menu to access the full menu for the current operating mode. Internet radio DAB radio FM radio CD Auxiliary input Spotify Amazon Music Deezer Bluetooth USB - Listen to internet radio - Listen to DAB radio - Listen to FM radio - Play music from CD - Connect to other devices - Play music from Spotify - Play music from Amazon Music - Play music from Deezer - Stream music using your smart device - Play music from USB System settings You can access `System settings' from the current menu. The system settings include Equaliser, Subwoofer, Streaming audio quality, Network, Time/Date, Brightness, Inactive standby, Language, Factory reset, Software update, Setup wizard, Info and Privacy policy. Play Internet, DAB or FM radio Internet - You can search for a radio station or podcast by location, genre or by the station name. You can also store preset stations or add a station to your favourites list. DAB - Carefully, extend the telescopic aerial. A scan of the Band III DAB channels will be carried out. Rotate the Tuning control to access the full station list. Press the Tuning control to select the highlighted radio station. FM - Extend the telescopic aerial. Rotate the Tuning control clockwise or anti-clockwise and then press the Tuning control to scan low to high or high to low frequency. USB Player Play your music collection from a USB memory device. Choose `USB playback' to playback a USB memory device. The USB socket can also be used to charge your smartphone, tablet or similar devices. Bluetooth 1 Ensure Bluetooth is enabled on your smart device. 2 Press Mode to select Bluetooth mode on your audio system. 3 The Bluetooth indicator will flash and your audio system will show that it is `discoverable'. On your smart device select `Stream 67L'. Once the connection is established the indicator will remain steady. You may now play your music. 4 To connect a different device, apply a long press on the Bluetooth Pair button on your audio system. Your audio system will become discoverable by other devices. Media playback controls Control media playback using the previous, next, play/pause or stop buttons. Note: These features are dependent on the music being played and will not always be available. Other information Play CD / CD MP3 / WMA discs Your audio system can playback standard CDs and CD-R/CD-RW discs with standard audio or compatible audio files. Use only full size standard CDs. Mini CDs (8cm diameter) are not compatible with the player and may jam the CD mechanism. 1 Press Mode to switch the unit to CD mode. 2 To eject or reload a CD give a long press on the CD Stop/Eject button. 3 Press the Play/Pause button to start playing the disc. Adjust the volume. To pause or resume playback press Play/Pause. 4 To stop playback press the CD Stop/Eject button. 5 While the CD is playing select skip tracks with the Previous and Next buttons. 6 When playing an MP3/WMA disc you can skip to another folder using the Up or Down buttons on the remote control. Pressing Menu will allow access to the browse file option. 7 Use the Repeat/Shuffle button to alter the playback order or repeat behaviour. Preset radio stations Your radio has 40 Internet radio, 10 DAB and 10 FM presets which can be set to store a radio station or (for Internet radio, a podcast). 1 Tune to the required radio station. Apply a long press on the Preset button `Save to preset' will be displayed. Use the Tuning control to scroll to an unused preset or a preset you wish to change. Press Tuning to store. 2 To recall a preset station, choose Internet, DAB or FM mode. Give a short press on the Preset button `Recall from preset' will be displayed. Use the Tuning control to select the desired preset station. Remote control battery replacement Please read the safety leaflet provided before using batteries. 1 Remove the battery cover on the rear of your remote control by pulling the small slot on the side of the remote body. 2 Insert 2 x AAA size batteries into the spaces in the compartment. Take care to ensure the batteries are inserted in the right direction as shown inside. 3 Replace the cover. If the remote is not to be used for an extended period of time it is recommended that the batteries are removed. Caution: Replace batteries only with the same or equivalent type. Danger of explosion if the batteries are incorrectly replaced. System reset If you wish to completely reset your audio system to its initial state perform a factory reset. Press Menu. Choose `System settings', `Factory Reset' then `YES'. All user entered settings will be erased. In order to minimise its energy consumption when not in use, your audio system will go into standby if it detects that it is no longer being used. By default this period is set to 8 hours but you may change it if you wish. With your audio system switched on, press Menu, choose `System settings' then `Inactive Standby' and then choose from 2, 4, 6, 8 hours or Off. Your audio system will go into standby after the selected time has expired. Stream 67L Smart Audio System with Bluetooth, USB and Streaming Services and remote control from iPhone and Android using UNDOK Please read this guide and safety/warranty guide before use. Specifications Power requirements Mains Remote control batteries USB output 100 - 240V 2 x AAA size 5V / 1A 50/60Hz Connectivity Wired Ethernet WiFi 10/100M bits/sec via RJ-45 connector 802.11 b, g, n or a supported with WEP and WPA / WPA2 encryption Compatible with 2.4 GHz and 5 GHz WiFi bands. 5 GHz Wi-Fi function: 5150-5350MHz, 5470-5725MHz and 5725-5875MHz Use restriction:This device is authorised in the following countries for indoor use only when used with 5GHz Wi-Fi (5150 to 5350MHz; channels 36 to 64): 2.4GHz WiFi EIRP POWER (MAX.) 19.76dBm 5GHz WiFi EIRP POWER (MAX.) 18.89dBm Circuit features AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO RS SE SI SK TR UK (NI) 3.5mm Headphone socket, 3.5mm Aux In. Aerial System WiFi antenna, DAB/FM Telescopic aerial Bluetooth standards A2DP, AVRCP, Bluetooth codecs supported SBC Bluetooth EDR EIRP POWER (MAX.) - 10.26dBm Frequency coverage FM 87.5 - 108MHz, DAB 174.928 - 239.200MHz Bluetooth 5.0 frequencies 2.402 - 2.480GHz Operating temperature range +5°C to +40°C Product markings This symbol indicates AC voltage. This symbol indicates Class II equipment. The name plate is located on the rear of the audio system. The company reserves the right to amend the specification without notice. Designed & Engineered in the UK Made in China Issue 1 2022-06-13 ROBERTS RADIO LIMITED www.robertsradio.com © 2022 Roberts Radio Limited