Raynesys Beach Tent User Manual

Cleaning

1. Shake off any sand or small particles from the poles and tent.
2. Wash the tent in cold water on a gentle cycle. Alternatively, use a mild bleach-free detergent in cold to lukewarm water. Hand washing or machine washing is supported.
3. Hang the tent outside to air dry.

Maintenance

1. Keep the product away from moisture and direct sunlight. Store it in a dry place.
2. Slight discoloration may occur during the first few washes. Please wash separately from other clothes.

Warm Tips

1. Do not iron or tumble dry.
2. Do not use bleach or strong alkaline detergents.

Cautions

• Do not use this Beach Tent as a permanent shelter.
• Do not set up this Beach Tent on steep inclines.
• Do not set up this Beach Tent in heavy rain, storm, strong wind, or lightning storms.
• Never place any flame source in or near your tent. Never use, or light or refuel a heat source inside your tent.
• Please use sunblock as the product is not fully effective at preventing sunburn.
• For any questions, please feel free to contact us via email: cs@iraynesys.com

Product Features

• [Square-top Design]
• ?️ Wind-proof
• ☀️ Sun Safe UPF 50+
• ? Water Resistance

Important Notice

Dear customer: If you receive a product with missing or damaged parts, or have any questions, please contact Raynesys customer service. We are sorry for any inconvenience and thank you for your understanding and support. Raynesys wishes you enjoy it and have a happy life.

Contact us on Amazon: From your Amazon order details page, select "Order" >> "Sold by" >> "Contact seller".

Package Contents

• Beach Tent x 1
• 8.5mm Thickened Fiberglass Poles x 2
• Sandbags x 4
• Steel Ground Pegs x 6
• Plastic Ground Pegs x 6
• Windproof Ropes x 4
• Accessory Bag x 1
• Storage Bag x 1

Installation Guide

1. Step 1: Choose an empty, flat place and lay out the tent.
2. Step 2: Connect two fiberglass poles.
3. Step 3: Pass the poles through the pole sleeves and make both ends crossed.
4. Step 4: Insert the crossed poles into the four corners of the tent.
5. Step 5: Tie the poles tightly with a rope and hang the hooks.
6. Step 6: Insert the ground pegs and tie the windproof ropes if necessary.
7. Step 7: Fill the four sandbags with sand.
8. Step 8: Complete the installation.