Instruction Manual for Heavenly Heat Saunas models including: Infrared 2 Person Sauna, 2 Person Sauna, Person Sauna, Sauna

HEAVENLYHEATSAUNAS Infrared 2 Person Sauna Instruction Manual v14

2 Person Infrared Sauna Assembly Manual

Far Infrared 2 Person Sauna – Heavenly Heat Saunas

PDF preview unavailable. Download the PDF instead.

hhs-infrared-2-person-sauna-assembly-manual ?v=1731787016
HEAVENLY HEAT
INFRARED SAUNA
Instruction Manual

Page. 02

TraIdniftriaorneadl Sauna Instruction Manual

TABLE OF
CONTENTS

Installation Procedure

03

a. Caution

03

Instructions

03

Step: 1

03

Step: 2

03

Step: 3

04

Step: 4

04

Step: 5

05

Step: 6

05

Step: 7

06

Step: 8

07

How to Use Instructions

09

a. Caution

09

b. Use Environment

09

c. Operation Instructions

09

d. Maintenance

11

Page. 03

Infrared Sauna Instruction Manual

INSTALLATION PROCEDURE
Dear users, Please read the directions carefully before use. The installation of the sauna requires a minimum of 2 people. You should not try to install the sauna on your own.

Instructions
1. Open sauna packages in a large area. Place Floor Panel (Box C) in desired location.
Front 2. Place Back Panel (Box A) snug behind Floor Panel.

Page. 04

Infrared Sauna Instruction Manual

3. Place Side Panel (Box B) snug to Floor Panel and Back Panel. Make sure panels are completely snug (You may need to give it a few strong taps). Secure with three external buckles on exterior of panels. The external buckles should only be used to secure the panel. They are not used to tighten the fit of the panels. Make sure panels are completely snug before securing external buckles.

External Buckle
4. Insert the shank panel snug behind the notch on the side panel and connect cord to the Back Panel, Insert Sitting Bench support and secure with 30mm black screws.
Insert sitting bench support and secure with 30mm black
screws.
Insert shank panel and connect cord to back wall.

Page. 05

Infrared Sauna Instruction Manual

5. Slide sitting bench in to place with the notches snug behind the shank panel. Place the other Side Panel snug with Floor and Back Panel. Make sure the shank panel is lined up with the notches on the Side Panel. Secure other Side Panel to Back Panel with 3 external buckles.

Place other side panel.
Make sure shank panel lines up snug behind notch on side panel. Slide sitting bench into place.
6. Install door handle with provided bolts. Do not over-tighten bolts. Then install front panel (Box A). Ensure front panel is snug with the Floor and both Side Panels before securing external buckles.

Inside

Outside

Page. 06

Infrared Sauna Instruction Manual

7. *Make sure to clear all wires from the walls to the outside of the sauna so the ceiling will fit into place.* Lift ceiling over the top of sauna and it will slide into place snug with Front, Back, and Side Panels. The vent is located at the back of the sauna above the bench, and the black electrical box is located towards the front of the sauna. Next, connect all cords from the Back and Side panels to the corresponding plugs on the ceiling.
Front of Sauna

Back of Sauna
Power cord (120V 15A).

Page. 07

Infrared Sauna Instruction Manual

Optional: Use 30mm black screws to secure ceiling to wall panels. This is not required for the function of the sauna, but if you will be sliding the sauna around we recommend adding these screws.

30mm Black Screws

Page. 08 8. Whole sauna.

Infrared Sauna Instruction Manual

Congratulations! The assembly of the sauna is complete

Page. 09

Infrared Sauna Instruction Manual

HOW TO USE INSTRUCTIONS
a.

b. Use Environment: c. Operation Instructions:

On / Off

Heaters On / Off

Timer Control

Temperature Control

Light Control

Press the key to turn light on/off. To change the color hold the key for 8 seconds. You will hear the beep and the temperature display will show "LE". Press the key to toggle between colors. Once you have the setting you want, do not touch press any buttons for 5 seconds and your setting will be saved.
The Infrared Heaters will shut off once the temperature of the sauna reaches 165F.

Page. 10

Infrared Sauna Instruction Manual

Standby state: When plugged in, the sauna will be on standby. The backlight will be on.

Turning on:

Press key, the sauna will be on, it will display "---","--" on screen, Lamp will be on. LOGO backlight will also be on.

Function:

When the sauna is on, press " from the last use of the sauna.

" key. Temperature and time will turn on to the setting

Time setting: when the sauna is on, press  to adjust time, time range is 5 min to 60min, every press will adjust 1 min, if you keep pressing this key, time will adjust
continuously.

Temperature setting:

When the sauna is on, press  to adjust temperature. Temperature range is to 149F.Every press will adjust 1F. If you keep pressing this key, temperature will adjust
continuously.

Press this therapy key 30 min.

to start therapy function. Temperature is fixed at 113F. Time is

Lamp setting:
When the sauna is on, press to turn on / off lamp. Press it for 5 seconds and it will show. "LE" in temperature display screen, and "0X" in time display zone. Press it again to change color. Temperature screen display "0X" X is 1-9).

When it displays "LE", press once to change one color and memorize. (L01 RGB is all on, L02b red blue, L03 blue, L04 blue green, L05 green, L06 green red, L07 red, L08 jumping change, L09 gradual changeIf no key is pressed for 8 seconds, the sauna will return to normal mode and the last light setting will be active.

Errors/alerts:
1. High temperature protect function. When temperature sensor detects sauna temperature is over 75^, the two display screen will show "HH", it will buzz and flicker, the sauna will be off. When temperature is lower than 75^, the sauna still can't be turned on, need to unplug and plug the electric outlet to have the sauna turned on again.

Page. 11

Infrared Sauna Instruction Manual

2. Temperature sensor fault detect. Open circuit: when the two display screens show "EO" and flicker, the control panel will buzz, sauna can not be running, will return normal use after trouble removal. Short circuit: when the two display screens show "E1" and flicker, the control panel will buzz, sauna can not be running, will return normal use after trouble removal.
d. Maintenance:

1-928-235-8081
support@heavenlyheatsaunas.com
543 E Andy Devine Ave, Kingman, AZ 86401,United States

Copyright © 24 Heavenly Heat Saunas. All rights reserved.


Adobe Illustrator 28.1 (Windows) iLovePDF