Tenda Quick Installation Guide

9-Port 10/100M Ethernet Desktop Switch

8FE+1GE Desktop Switch

Models: TEF1109D / TEF1109DT

Package Contents

Switch * 1
Power adapter * 1
Quick installation guide * 1

Connect Your Devices

Diagram showing connections for Router, IP camera, Computer, Printer to the switch ports (LAN1-LAN4, WAN, VLAN). Includes a grounding terminal connection.

Tip: All ports support auto MDI/MDIX, so both straight-through and crossover cables are acceptable.

Grounding: Connect the grounding terminal to a grounding cable to protect the switch from lightning damage.

Specifications

Model	TEF1109D	TEF1109DT
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x	IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab
10/100 Mbps RJ45 Port	Port 1 - 9	Port 1 - 8
10/100/1000 Mbps RJ45 Port	/	Port 9
Working mode	VLAN off, VLAN on	VLAN off, VLAN on
Switching capacity	1.8 Gbps	3.6 Gbps
Store-and-forward	Supported	Supported
Auto learning & auto aging	Supported	Supported
MAC address table	2 K	2 K
Dimension	140.2 mm * 66.2 mm * 25.2 mm
Power supply	Input: 100-240 V AC, 50/60 Hz, 0.3 A Output: 9 V DC, 0.6 A
Lightning protection	/	6 kV for port 9
Operating environment	Temperature: (0 - 40) °C Humidity: (10 - 90) % RH, non-condensing
Storage environment	Temperature: (-40 - 70) °C Humidity: (5 - 90) % RH, non-condensing
Transmission rate	Ethernet: 10 Mbps (half duplex) / 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex) / 200 Mbps (full duplex)	/
Transmission media	Ethernet: CAT3 UTP/STP cable or better Fast Ethernet: CAT5 UTP/STP cable or better	/
Gigabit Ethernet:	/	2000 Mbps (full duplex)
Transmission media (Gigabit)	/	CAT5e or CAT6 UTP/STP cable (recommended)

LED Indicators

LED Indicator	Status	Description
Power (Symbol: ⚡)	Solid on	The switch is connected to a power resource properly.
	Off	The switch is disconnected or not properly connected to a power resource.
	1-9 (Port LEDs)	Solid on	The port is connected properly.
Blinking (Symbol: ?)		Data is being transmitted over the port.
Off		The port is disconnected or improperly connected.

Working Mode Introduction

The switch has two modes: VLAN off and VLAN on. Use the slide switch to set the switch to your required mode according to the following descriptions.

VLAN off: Default mode. All ports can communicate with each other.
VLAN on: Ports 1 to 8 can communicate with port 9, but not with each other. This mode reduces broadcast storms and isolates DHCP broadcasts.

Regulatory Information

FCC Statement: This equipment complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received. Caution: Changes not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use shielded RJ45 cables to avoid unnecessary radiation interference.

Adapter Information:
Model: BN049-A05009E/BN049-A05009B
Manufacturer: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
Input: 100 - 240 V AC 50/60 Hz, 0.3 A
Output: 9 V 600 mA

CE Mark Warning: This is a Class A product. In a domestic environment, it may cause radio interference. The mains plug is used as a disconnect device and shall remain readily operable. Handle according to WEEE directive 2012/19/EU for recycling.

Product Details:

Model TEF1109DT: 8FE+1GE Desktop Switch. Country of Origin: CHINA.
Model TEF1109D: 9-Port 10/100M Ethernet Desktop Switch. Country of Origin: CHINA.

Copyright and Support

Technical Support:
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052
Canada hotline: 1-888-998-8966
Hong Kong hotline: 00852-81931998
Website: http://www.tendacn.com
E-mail: support@tenda.com.cn

If any item is missing, damaged, or incorrect, please keep the original packaging and contact the local reseller or distributor immediately.

	Tenda TEF1109D/TEF1109DT 9-Port Ethernet Switch Quick Installation Guide Quick installation guide for Tenda TEF1109D and TEF1109DT desktop Ethernet switches, covering specifications, LED indicators, and setup instructions.
	Tenda SG105 / SG108 Gigabit Ethernet Switch: Features & Specifications Discover the Tenda SG105 and SG108 Gigabit Ethernet Switches, offering high-speed, intelligent, and easy-to-use networking solutions for small businesses and offices. View detailed specifications and features.
	Tenda Gigabit and Fast Ethernet Network Switch Quick Installation Guide Concise guide for installing and configuring Tenda Gigabit Ethernet Switches (TEG series) and Fast Ethernet Switches (TEF series), covering package contents, setup, indicators, safety, and regulatory information.
	Ghid de Instalare Tenda TEG1005D / TEF1005D - Switch Gigabit Ethernet Descoperiți cum să instalați și să configurați rapid switch-urile de rețea Tenda TEG1005D și TEF1005D cu acest ghid complet. Informații despre porturi, conexiuni și indicatori LED.
	Tenda TEG1008M 8-Port Gigabit Ethernet Switch Quick Installation Guide Quick installation guide for the Tenda TEG1008M 8-Port Gigabit Ethernet Switch. Learn about desktop and wall mounting, device connections, specifications, and LED indicators. Support information for Tenda is included.
	Tenda TEF1109P-8-102W: 9-Port Fast Unmanaged PoE Switch Explore the Tenda TEF1109P-8-102W, a 9-port fast unmanaged network switch featuring 8 PoE ports with a total power budget of 92W. This switch offers 1.8 Gbps switching capacity, 6KV lightning protection, and plug-and-play functionality, making it ideal for SMBs, hotels, and offices for surveillance and wireless networking.
	Tenda Gigabit Ethernet Switch Installation Guide Official installation guide for Tenda Gigabit Ethernet Switches, covering setup, port descriptions, and safety information for models like TEG1016D and TEG1024D.
	Tenda TEF1106P-4-63W & TEF1110P-8-63W Quick Installation Guide Concise installation guide for Tenda's TEF1106P-4-63W and TEF1110P-8-63W unmanaged PoE switches, detailing hardware and software specifications, package contents, and certifications.