Klarstein St. Moritz Electric Fireplace Heater

Safety Instructions

• Ensure the voltage on the rating plate matches your local power supply.
• If the power cord is damaged, it must be replaced by a qualified professional.
• Do not place the fireplace directly under a power socket.
• Maintain a distance of at least 1 meter from flammable materials such as furniture and curtains.
• Keep the appliance out of reach of children. Children should only operate the device under supervision.
• This appliance is intended for household use only.
• Do not operate if the device malfunctions or is damaged.
• Repairs should only be performed by qualified professionals.
• Do not run the power cord under carpets or rugs.
• Ensure the power cord does not run over sharp edges or hot surfaces.
• Do not cover the fireplace to avoid overheating.
• Do not use with external timers or remote-controlled sockets.
• Do not immerse the appliance in water or other liquids.
• Do not use near bathtubs, showers, or swimming pools.
• Do not use the appliance outdoors.
• Do not use with wet hands.
• Do not use on or near hot surfaces.
• Before cleaning, unplug the device and allow it to cool completely.
• Do not use abrasive cleaners.
• Only use accessories approved by the manufacturer.
• Children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, may use the device if supervised and instructed on safe use.
• Ensure children do not play with the appliance.

Caution: Risk of burns! Some parts of the product can become very hot.

Technical Data

Operation

The fireplace has a control panel located behind a cover (1).

Controls:

• 1. Cover: Conceals the control panel.
• 2. Fire Adjustable Switch: Adjusts the intensity of the flame effect.
• 3. Thermostat: Sets the desired room temperature.
• 4. Fire effect setting switches:
  • 4a. Fan (without heater): Operates the fan for air circulation.
  • 4b. Heater 900 W: Activates the 900W heating element.
  • 4c. Heater 900 W: Activates the second 900W heating element (for 1800W total).
  • 4d. Fire effect: Activates the flame effect.

Selecting Functions:

• Remove the cover (1).
• Fire effect only: Select 4d.
• Fan only: Select 4a.
• Low heating level (900 W): Select 4a + 4d.
• High heating level (1800 W): Select 4a + 4b + 4c.
• Heating and fire effect: Select 4a + 4b + 4c + 4d.

Note: The heating function requires the fan (4a) to be switched on.

Use control (2) to adjust the flame intensity and control (3) to set the desired temperature.

Lamp Replacement

• Disconnect the device from the power supply and allow it to cool.
• Loosen the screws on the front panel near the decorative trim.
• Lift the decorative trim to access the two light bulbs.
• Replace the bulbs with maximum 25 W bulbs.

How to Fix the Feet

The fireplace is shipped with the feet detached to prevent damage during transport. Attach the feet as follows:

1. Remove the feet from the packaging.
2. Align each foot with the pre-drilled holes on the underside of the unit.
3. Secure each foot using the provided screws and a screwdriver. Repeat for all four feet.

Disposal Considerations

This symbol [crossed-out wheelie bin] indicates that the product should not be disposed of with household waste. It must be taken to a designated collection point for the recycling of electrical and electronic equipment. Proper disposal protects the environment and human health. Contact your local authority or waste disposal service for recycling information.

Manufacturer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.

Importer for Great Britain: Berlin Brands Group UK Ltd, PO Box 1145, Oxford, OX1 9UW, United Kingdom.