Shuttle XPC slim POS DS100P: Fanless PC System for POS Applications
The Shuttle POS DS100P is a compact mini PC with a robust 1.3-litre metal chassis and extensive connectivity, designed for professional applications.
Feature Highlights
- Slim Design: 1.3-litre metal chassis, dimensions 20 x 16.5 x 3.95 cm (LWH), includes stand and VESA mount (75/100 mm).
- Processor: Intel Celeron 4205U, Dual Core, 15 W TDP, integrated Intel UHD graphics 610, fanless heatpipe cooling.
- RAM: 4 GB DDR4-2133, 260-pin SO-DIMM.
- Storage: 120 GB SSD, 2.5" drive, SATA 3 interface; M.2 2280 slot supports optional M.2 card.
- Connectors: HDMI 2.0a, DisplayPort 1.2, D-Sub/VGA, 4x USB 3.2 Gen 1, 4x USB 2.0, SD card reader, 2x Intel Gigabit LAN, 2x Audio (Line out + mic), 1x COM port (RS232/RS422/RS485), connector for external power button.
- WLAN: WLAN 802.11ac with two external antennas.
- Power Supply: External 65 W fanless power adapter.
- Optional Accessories: Adapter cable for external power button (CXP01), 2U rack mount kit (PRM01), adapter cable for 2nd COM port (PCP11), DIN-Rail mounting kit (DIR01).
Product Features
Robust, Stylish and Extremely Small: The 1.3-litre chassis meets high standards for quality and stability, suitable for digital signage and demanding multimedia tasks. The interior is designed for easy installation and upgrades.
Ease of Installation: Two practical bay covers allow for easy installation or upgrade of hardware components without needing cables or a cooling system.
24/7 Nonstop Operation: Officially approved for 24/7 operation with passive cooling, suitable for digital signage and POI/POS applications at ambient temperatures up to 40 °C. Requires free air circulation and clear ventilation holes.
No Fan Noise: A large heatsink cools the processor passively. Using an SSD drive makes the system virtually noiseless, ideal for noise-sensitive environments.
Energy-saving: Consumes approximately 6 W in idle mode with a 2.5" SSD. Annual consumption is less than 12.5 kWh.
Technical Specifications
Fanless and Silent: Equipped with passive cooling and SSD drive, no fan noise, suitable for noise-sensitive environments, fanless, dust-free, virtually maintenance-free.
Low Power Consumption: Power consumption in idle mode with 2.5" SSD under Windows 10: ca. 6 W.
24/7 Nonstop Operation: Approved for 24/7 permanent operation. Requirements: Free circulation of air, clear ventilation holes.
Chassis: Slim-PC with black steel chassis, passive cooling, bays for memory, 2.5" drive and M.2 card accessible via cover plates. Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres. Weight: 1.5 kg net, 2.2 kg gross. Includes Kensington Lock holes and M3 threaded holes.
Operating Position: Vertical with supplied feet or VESA-mounted. Horizontal operation is permitted but without rubber feet; maximum operating temperature is 35 °C.
Operating System: Windows 10 IoT Enterprise 2019 LTSC (64-bit).
Processor: Intel Celeron 4205U (ULV), System-on-a-chip (SoC), FCBGA1528, Whiskey Lake U (8th Gen Intel Core), 2 Cores / 2 Threads, 1.8 GHz clock rate, L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB, TDP 15 W, 14nm++ manufacturing process, Max Tjunction Temperature: 100 °C. Supports 64-bit, VT-x, VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2.
Integrated Graphics: Intel UHD Graphics 610, GPU clock 300~900 MHz, 12 Execution Units (EUs), Supports DirectX 12, H.264, H.265, VP8/9, VC-1, AVC hardware decoding, Quick Sync Video, Clear Video HD. Supports up to three independent screens: DisplayPort 1.2 (Ultra HD @ 60 Hz), HDMI 2.0a (Ultra HD @ 60 Hz), D-Sub/VGA (analog).
Mainboard BIOS: High quality solid capacitors, supports resume after power failure, Wake on LAN (WOL), Power on by RTC Alarm, supports boot from M.2 SSD, USB, SD card reader. AMI BIOS in 8 MByte EEPROM with SPI interface. Supports hardware monitoring, watch dog function, UEFI, Firmware-TPM Version 2.0.
Power Adapter: External 65 W fanless power adapter. Input: 100~240 V AC, 50/60 Hz, max. 1.6 A. Output: 19 V DC, max. 3.42 A, max. 65 W. DC cable length: ca. 170 cm. AC cable length: ca. 170 cm (Europlug).
DC Input: Connector: 5.5 / 2.5 mm. Supports external power source with either 12V±5% or 19V±5%.
Memory (RAM): 4 GB DDR4-2133 (PC4-17000) SDRAM at 1.2 V, SO-DIMM module with 260 pins. Two SO-DIMM sockets support a maximum of 16 GB each. Maximum total size: 32 GB.
SSD Drive: 120 GB SSD drive in 6.35 cm / 2.5" format with SATA 3 interface.
M.2 Slot for SSDs: M.2 2280 BM slot supports PCI-Express Gen. 2.0 X4 (up to 2 GB/s) and SATA v3.0 (max. 6 Gbps). Supports M.2 cards with width 22 mm and length 42, 60, or 80 mm (type 2242, 2260, 2280). Supports M.2 SATA SSDs (B+M key) and M.2 PCIe NVMe SSDs (M key).
Card Reader: Integrated SD card reader. Supports SD, SDHC and SDXC memory flash cards. Supports booting from SD card.
Audio: Realtek ALC 662 High-Definition Audio. Two analog audio connectors (3.5 mm) at back panel: 1) line out (headphones), 2) microphone input. Digital multi-channel audio output via HDMI and DisplayPort.
Dual Intel Gigabit LAN: Two RJ45 ports. Intel i211 Ethernet Controller and Intel i219LM PHY. Supports 10 / 100 / 1.000 MBit/s operation. Supports WAKE ON LAN (WOL), network boot by Preboot execution Environment (PXE), Supports Teaming mode.
Wireless Network (WLAN): Built-in M.2-2230-A/E WLAN card with connectors for two external antennas. WLAN Controller Realtek RTL8821AE. Supports WiFi IEEE 802.11b/g/n/ac (2.4 / 5 GHz band, 1T1R). Supports 20 / 40 / 80 MHz channel bandwidth. Security: WPA/WPA2/WEP. Supports Bluetooth 4.0 (2.4 GHz band).
Front Panel Connectors: 2x USB 3.2 Gen 1 (max. 5 Gbps), 4x USB 2.0, Microphone input, Audio Line-out (headphones), SD card reader. Includes Power button, Power LED (blue), HDD LED (yellow).
Back Panel Connectors: DisplayPort 1.2, HDMI 2.0a, D-Sub/VGA, 2x USB 3.2 Gen 1 (max. 5 Gbps), 2x Intel Gigabit LAN (RJ45). Serial COM port (5V / 12V, switchable to RS232 / RS422 / RS485). DC-input connector. 4-pin connector "SW2" for power button, Clear CMOS and 5 V DC.
Always-On-Jumper: Removing Jumper J9 allows the system to start unconditionally once power is applied.
Scope of Delivery: Multi-language user guide, two metal feet with screws, VESA mount kit with screws, screws for 2.5" storage and M.2 cards, Driver DVD for Windows 10 (64-bit), External 65W power adapter with power cord (Europlug).
Optional Accessories
- PCP11: adapter cable for the second COM port (replaces VGA port).
- CXP01: adapter cable for external power button.
- PRM01: 2U rack mount front plate for two Shuttle XPC slim.
- DIR01: mounting kit for 35 mm DIN-Rail.
Environmental Specifications
- Operating temperature range: 0~40 °C.
- Relative humidity, non-condensing: 10~90%.
Conformity Certifications
- EMI: FCC, CE, BSMI, C-Tick.
- Safety: ETL, CB, BSMI.
- Other: RoHS, Energy Star, ErP.
- Classified as technical information equipment (ITE) in class B.
- CE-mark conforms to EU directives: 2014/30/EU (EMC), 2014/35/EU (LVD), 2009/125/EC (ErP), 2014/53/EU (RED).
Power Consumption
Configuration: BIOS V1.00, 2x 4GB DDR4-2400, SSD SATA 2.5" Samsung 120GB 750EVO, Windows 10 Pro (64-bit) 1809
| CPU | DS10U | DS10U3 | DS10U5 | DS10U7 |
|---|---|---|---|---|
| Cel. 4205U | i3-8145U | i5-8265U | i7-8565U | |
| Win 10 idle | 5.72 W | 5.72 W | 5.72 W | 5.72 W |
| Win 10 full load | 26.39 W | 32.85 W | 33.77 W | 33.89 W |
| Win 10 S3 (standby) | 0.85 W | 0.85 W | 0.85 W | 0.85 W |
| Win 10 S5 (EUP=ON) | 0.19 W | 0.19 W | 0.19 W | 0.19 W |
| Win 10 S5 (EUP=OFF) | 0.51 W | 0.51 W | 0.51 W | 0.51 W |
Footnotes
[1] Jumper for COM port configuration: Pin 9 of the COM-Port is multi-functional. Configurable as Ring Indicator (RI) or external power supply (5V or 12V). COM 1 can be set to RS232, RS422 or RS485 in BIOS. Second COM port (COM 2) supports RS232 only and may require adapter (PCP11), disabling VGA port.
[2] LTE Adapter Kit WWN03: Using this kit means the 2.5" bay cannot be used for SATA drives. An SSD in M.2-2280 format is required instead.
[3] Teaming Mode: Groups network adapters for load balancing and failover. Driver download available.
[4] Four-pin header at the back panel: For external power button, 5 V DC voltage for external devices, and Clear CMOS function. Optional accessory: CXP01 adapter cable.
[5] Caution: For ambient temperatures higher than 35 °C, using an SSD instead of an HDD is strongly recommended.
[6] Power on after power fail: BIOS provides "Power-On after Power Fail" function. For unconditional startup, remove Jumper J9.
[7] HDMI output supports DVI-D with an optional adapter.
[8] How to convert DisplayPort into HDMI/DVI: DisplayPort output can be converted to HDMI or DVI using passive adapter cables (e.g., DELOCK 82590, DELOCK 82435). The integrated graphics automatically detect the display and output the appropriate signal. A monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple passive adapter.
