4G Intelligent Solar Energy Alert PTZ Camera User Manual

1. PRODUCTS & PACKING LIST

1.1 Product Picture

The product features a white PTZ (Pan-Tilt-Zoom) camera unit mounted on a bracket, connected to a solar panel. The camera includes a lens, indicator lights, and an antenna.

1.2 Packing List

• 1* Solar panel
• 1* Screw kit (containing 1*Hexagon spanner, 1*Screw driver, 8*Screws, 4*Tapping screws)
• 1* Position paper
• 1* PTZ Camera
• 1* USB charging cable
• 1* Qualification document
• 1* User manual

1.3 Process

1. Solar panel connection: Connect the solar panel to the camera and secure it at a suitable angle using screws.
2. SIM and TF card insertion: Loosen the protective cap, insert the SIM card and TF card, then retighten the cap.
3. Power cable connection: Connect the cables between the solar panel and the camera, then secure the waterproof cap.
4. Panel power-on: Remove the rubber plug from the solar panel to ensure it is powered on. Then, replace the rubber plug.

2. INSTALLATION

2.1 Integrated Installation

This installation method involves mounting the camera and its integrated solar panel together as a single unit. The diagram illustrates the camera with the solar panel positioned above it, mounted on a pole or wall. A recommended installation height of approximately 2.6 meters is indicated.

2.2 Separated Installation

This method allows for independent mounting of the solar panel and the camera. The solar panel can be positioned in an optimal location for sunlight and connected to the camera unit via a cable. The diagram shows the camera unit mounted separately. It is noted that additional accessories, such as a bracket and a 2-meter extra power cable, may be required (these are not included as standard).

3. APP INSTALLATION

3.1 App Download

To download and install the "UBox" application, scan the provided QR codes. One QR code is for iOS devices (available on the App Store) and the other is for Android smartphones (available on the Google Play Store).

3.2 App Registration

Follow these steps to register your account:

1. Open the app and tap the 'Register' button. Enter your email address.
2. Review and agree to the user agreement. A verification code will be sent to your registered email address.
3. Enter the verification code received via email into the app and tap 'Next'. If you do not find the email in your inbox, please check your email's spam or junk folder.
4. Set a secure login password. The password must be at least 8 characters long and include a combination of letters and numbers. Confirm your password.
5. Tap 'Register' to complete the account creation.
6. Enter your email address and the newly created login password, then tap 'Login'.

For an enhanced user experience and to ensure you receive all notifications, it is recommended to grant the app all necessary permissions when prompted.

4. WI-FI CONNECTION

Follow these steps to connect your device to your network:

1. In the app, tap 'Add Family' and set the room or position for your device as prompted.
2. Enter a name for your family and tap 'Next'.
3. Input necessary location information, such as Country and Province, then tap 'Done'.
4. Tap 'Add a device' to begin adding a new smart device.
5. Insert the SIM card into the device, followed by the battery. Some models may require the antenna to be installed.
6. Power on the device. Wait approximately 1 minute for the device's blue LED indicator light to turn on. Then, tap 'Next' in the app.
7. If the blue LED does not illuminate, review the configuration notes: ensure the SIM card is correctly inserted and valid with sufficient data, verify that the 4G signal is normal in the device's location, and confirm the antenna is properly installed.
8. Locate the UID QR code printed on the device. Use the app's scanning function to scan this QR code to add the 4G device.
9. The app will then search for the device on the internet, which may take between 5 to 60 seconds.
10. Once found, select a name and location for the device, then tap 'Done'.
11. The device will automatically appear in the device list. Setup is now complete, and the device is ready for use.

4.12 Notes about PIR Detection

The PIR (Passive Infrared) sensor detects motion. Users can adjust the PIR detection sensitivity within the device settings. For environments with frequent movement or to optimize battery life, it is recommended to set the sensitivity to "Disabled" or "Low" to minimize false alerts and reduce device wake-up cycles.

• Disabled: PIR detection is turned off.
• Low: Triggers an alert with a 7-second delay after motion is detected.
• Medium: Triggers an alert with a 5-second delay after motion is detected.
• High: Triggers an alert with a 1-second delay after motion is detected.

5. DEVICE SETTING

Access the device list to manage your camera:

• Select your family or smart device location from the list.
• Toggle push notifications on or off.
• Access Settings for advanced options including Sharing, Cloud storage management, and device deletion.
• Tap to enter the live preview section of the camera feed.

Smart Device Basic Settings allow configuration of:

• Storage management
• Screen flip orientation
• Environmental model
• PIR detection sensitivity
• Sleep time intervals
• Power frequency settings
• LED indicator status
• Device name customization

You can also view essential device information:

• Device name
• Device ID
• Model number
• Firmware (FW) version
• Manufacturer details

An option to check for and install firmware (FW) updates is also provided.

Cloud Service options enable the activation of cloud storage and AI facial recognition services.

The My Friends section allows management of friend lists and associated permissions.

Common Settings provide controls for default voice prompts and video resolution.

The About section enables you to review your account details and change your password.

To view recorded videos stored in the cloud, click the Calendar icon ?️ located in the top-right corner of the app interface. Then, select the desired date to playback the recorded footage.

6. SPECIAL NOTES!

• Battery Life: The device is powered by a rechargeable lithium battery. Its lifespan is influenced by the frequency of device wake-ups. In environments with high activity, it is recommended to disable or reduce the PIR sensor's sensitivity to minimize device wake-ups and extend battery life. Please charge the battery promptly when its level is low.
• Wi-Fi Signal: Ensure the device remains within the operational range of your Wi-Fi router. It is crucial to maintain a stable and strong Wi-Fi signal, especially if there are thick or insulating materials between the device and the router.
• Low Power Consumption Design: This device is designed for low power consumption. Each time the device is activated, it operates for a short duration before entering standby mode to conserve power. The active work times can be configured through the app settings.
• Push Notifications (Mainland China): For users located in mainland China, it may be necessary to enable the app's self-starting function within your phone's settings to ensure reliable receipt of push messages, as direct support for Google's system push messages might be limited.
• Cloud Storage Trial: The device includes a complimentary one-month trial of cloud storage services. If you wish to continue using these value-added services after the trial period concludes, you will need to purchase a subscription through the app.