Overall Dimensions
This document outlines the key overall dimensions for a faucet, presented through detailed measurements for two distinct views.
Left View: Frontal Dimensions
The frontal view of the faucet illustrates:
- Maximum Installation Clearance Height: 40 inches (indicated as MAX 40"). This likely refers to the maximum vertical space required above the faucet.
- Height to Handle Top: 7.83 inches from the mounting surface to the highest point of the handle.
- Faucet Body Width: 3.62 inches, representing the width of the main faucet body or handle assembly.
- Height to Spout Outlet: 3.86 inches from the mounting surface to the point where water exits the spout.
- Water Inlet Connection: G1/2 thread size for water supply lines.
Right View: Side Dimensions and Spout Details
The side view of the faucet provides details on spout geometry and reach:
- Overall Height: 6.57 inches from the mounting surface to the highest point of the spout.
- Spout Reach: 7.99 inches, measuring the horizontal distance from the faucet's center of rotation to the spout tip.
- Height to Spout Pivot: 6.38 inches from the mounting surface to the point where the spout pivots.
- Spout Angle: The spout is positioned at an 18-degree angle downwards.
- Spout Horizontal Offset: 5.82 inches, the horizontal distance from the spout pivot to the spout tip.
- Mounting Diameter: 1.89 inches (Ø1.89"), indicating the diameter of the hole required for mounting the faucet.
