ANBERNIC RG351V User Manual

System Startup and Shutdown

System Startup

1. Insert the system card (TF1/INT).
2. Press and hold the power button on the right side to start the system. The motor will vibrate upon successful startup.

Shutdown

1. Press SELECT to access the shutdown menu.
2. Choose 'Software shutdown' for a safe system shutdown.

Note: TF2/EXT is for game storage and requires the volume label to be 'GAMES' (uppercase). The format must be FAT32. You must refresh or restart the system after inserting or removing cards for the interface to display correctly.

System Main Interface

After the system starts, the main interface is displayed. Refer to the table below for key operations:

Key Settings

After entering the system, press the START button to access settings:

• Language Settings: SYSTEM-SETTINGS -> LANGUAGE
• Brightness Settings: System Settings -> Brightness
• External Handle Settings: After connecting a joypad via USB-OTG, press the joypad A button to enter the joypad button setting.
• WIFI Settings: Network settings -> Enable WIFI -> Select WIFI SSID -> Enter WIFI KEY. After entering network settings, you can see the IP address.

Copy Game

There are multiple methods to copy games:

• Method 1 (Memory Card & DiskGenius): Insert the game console's memory card into a computer. Use DiskGenius to format the TF card to FAT32. Create a rom folder (e.g., 'gba') for the simulator. Safely eject the card after copying.
• Method 2 (WIFI & SFTP): Connect to WIFI, enter the IP address, and use SFTP protocol with username 'root' and password 'emuelec'.
• Method 3 (Pre-equipped Memory Card): If the memory card is pre-equipped with the console, insert it directly into a Windows 10 computer to copy games.

Independent Simulation

• Exiting Games: For PSP, NDS, and Arcade games, press START + A to exit.
• Almighty Simulator: Press L3 + F to bring up the menu. Use the B button to select and exit the program.
• PSP Games: Press the F key to access the menu and exit the game.

Charging Function

The console supports 5V2A charging via a Type-C cable. The charging cable included in the standard package is for charging only and does not support data transmission.

• When charging, the yellow LED light will illuminate and turn off when fully charged.
• The green LED light indicates normal operation.
• The green LED will turn red when the battery is low.

Game Operation

Detailed controls for various simulators:

Simulator Operation

Main Console Keys and Function Layout

Front

Diagram showing the front layout of the console with buttons labeled: D-Pad, SELECT, START, L1, L2, R1, R2, Game keys, TF1/INT, TF2/EXT.

Back

Diagram showing the back layout of the console with buttons labeled: Power, VOL-, VOL+, RESET, OTG DC/OTG.

Q&A

• Q: Cannot access the game using DiskGenius.
  A: Ensure no other software is using the memory card.
• Q: How to collect favorite games?
  A: Press the Y button on the desired game to add it to FAVORITES.
• Q: Simulator display has changed (smaller characters).
  A: Navigate to System Simulator settings -> Input -> Menu -> xmb to restore default settings.
• Q: Too many simulators, difficult to browse.
  A: Press B on the main interface to bring up a simple list menu for easier browsing.
• Q: How to exit games easily?
  A: While in a game, press START + A to forcefully exit.

Matters Needing Attention

Matters needing attention:

• When reading or writing data, do not press the reset button to avoid data loss.

An image displays the RG351V console with a fantasy-themed game scene and gaming accessories.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement

This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.