G21 Insect Killer
Models: GS-16, GTS-30, GT-40
Introduction
Thank you for purchasing the G21 Insect Killer. This electronic device uses ultraviolet light, an effective method to attract flies, mosquitos, and all other kinds of flying insects. The insects are subsequently killed by high voltage.
Important Warnings and Cautions
Warnings:
- High voltage! Disconnect the device from the electric source prior to cleaning or maintenance.
- Keep the device out of the reach of children.
- Never place metal objects onto the high-voltage grids located inside of the device.
- Do not place any flammable substances close to the device.
- If the device gets damaged, the power cables need to be repaired or replaced by a qualified technician.
- The device requires regular cleaning.
Caution:
This electronic appliance cannot be used by children or persons with limited physical, psychological, or sensory abilities, unless they are supervised or instructed by a person responsible for their safety.
Product Diagram and Parts List
The following diagram illustrates the components of the G21 Insect Killer. The numbered parts are detailed below:
The diagram shows an exploded view of the insect killer, with components numbered from 1 to 19, indicating their positions within the device.
| Part Number | English Name |
|---|---|
| 1 | Top lid |
| 2 | Ballast |
| 3 | Starter |
| 4 | High voltage transformer |
| 5 | Power switch |
| 6 | Upper board |
| 7 | Left cover |
| 8 | Left board |
| 9 | Lamp stand |
| 10 | Luring Tubes |
| 11 | Right board |
| 12 | Right cover |
| 13 | Bottom board |
| 14 | Super Insulator |
| 15 | High voltage grid |
| 16 | Mesh |
| 17 | Left plastic lid |
| 18 | Right plastic lid |
| 19 | Collection tray |
