User Manual for PAL ELECTRONICS models including: VPS, VPS Video Panel System, VPS, Video Panel System, Panel System, System
Intercom | Pal Electronics
User Manual-V1 VPS Video Panel System
|Page1
Table of Contents
1.
Product Overview ........................................................................................... 3
1.1.
Introduction to Product................................................................... 3
1.2.
Specification .................................................................................... 3
1.3.
Features ........................................................................................... 4
1.4.
Dimension ........................................................................................ 5
1.5.
Interface Introduction ..................................................................... 5
. 2
Installation instructions.................................................................................. 6
2.1.
Wall-mounted installation .............................................................. 6
2.2.
Flush-mounted. ............................................................................... 7
2.3.
Installation Height ........................................................................... 8
. 3
Setup a new device......................................................................................... 8
3.1.
New device setup via the PalGate application ............................... 8
3.2.
New device Setup via the PAL Portal............................................ 10
4.
VPS Main Screen. .......................................................................................... 12
|Page2
1. Product Overview
1.1. Introduction to Product Thank you for selecting our product, the VPS-Video Panel System, providing you with a wireless video intercom touch panel screen. Enjoy effortless and swift installation without the need for infrastructure. This system enables you to make video calls and manage settings conveniently through the PalGate App and WEB portal. 1.2. Specification
Camera
MFC/RFID
LCD Touch Screen
microphone |Page3
1.3. Features
Display Size Display Resolution Touch Screen
Anti vandal design
Anti vandal glass
camera
cellular network supported Wi-Fi 802.11a/b/g/n
Bluetooth NFC Ethernet Relay Input Supports App PoE Card reader
7-inch
720x1280
8M pixels View Angle 120°
4G / 3G / 2G 2400MHz~2482MHz 5180MHz~5825MHz
BT4.2 LE 13.56 MHz RJ45, 10/100Mbps 2 * Relays (N.O/N.C) 2 * Input Android / iOS Fully-Integrated IEEE 802.3-Compliant POE+ PD Interface NFCIP-1 NFCIP-2 ISO/IEC 14443 ISO/IEC 15693 MIFARE
Audio Interfaces
Installation
Power Supply Power Output Working Temperature Touch Panel Interface Ambient Light Sensor Wiegand 26bit reader SD Card Interface Physical Characteristics languages
Speaker: Hidden powerful 15W/4 Microphone: -42dB ±3dB @ 94dB SPL
Wall-mounted Flush-mounthed
DC 48V or/and PoE+ DC 12V 2.5A _-20 to 65°C
Size: 251.6 x 129.6 mm English,Hebrew,Russian,Spanish,Dutch
|Page4
1.4. Dimension
1.5. Interface Introduction
WIFI/BT Antenna 4G cellular network Antenna
RJ45 connection network and PoE+
*Power Input - PoE+ or/and power supply 48V DC
+48V GND N.O-1 COM-1 N.C-1 N.O-2 COM-2 N.C-2 D 0 D 1 GND INPUT-1 GND INPUT-2 GND 12V Output
|Page5
2. Installation instructions
2.1.Wall-mounted installation
Step 1- Please loosen the screw.
Step 2- Separate the panel from the back cover.
Step 3
Step 4- Stick the gasket to the rear of the unit, (to prevent water from entering).
Step 5- Secure it by tightening the screws to the wall.
Step 6
Step 7
Step 8- Fix VPS front panel on the case with screws. |Page6
2.2. Flush-mounted.
Step 1 - Stick the gasket to the rear of the unit, (to prevent water from entering). Step 2
|Page7
2.3.Installation Height
1.5 meters
The recommended installation height for the camera is 1.5 meters (4.9 feet) above the ground.
3. Setup a new device
There are two options available for system setup: through the PalGate application or via the WEB portal.
3.1.New device setup via the PalGate application You may download our App from either the Apple App Store or from Google Play by searching for the name "PalGate". If you prefer, you can access a direct link by scanning the QR codes below
|Page8
Step1- Launch the app and tap on the three horizontal lines located at the top-left corner of the screen.
Step2- Press on 'Add New Device.
Step3- Press on the camera icon located at the top-right
corner of the screen.
Step4-Proceed to scan the QR code displayed on the VPS screen.
Step5- Proceed with the setup process and follow the instructions provided within the application. Upon completion of this process, the system setup will be successfully finalized.
|Page9
3.2.New device Setup via the PAL Portal Step1- Sign into the PAL Portal and you will see the homepage. Click on "Devices" and on the + button to add a new device.
Step2- This will open a window (below) where you are asked to enter the Serial number of the device and then click next. This number will begin with VP followed by 9 digits and can be found on the sticker on the PAL packaging or on the back of the device.
Step3- After you enter the Serial # you will be asked to enter a code and then click next. The code is a 5-digit number shown on the sticker on the PAL packaging or on the back of the device.
| P a g e 10
Step4- Next you will enter the address of the new device. This can be as simple as a city and state or can be an exact street address. The name is what the account administrator will name the device and Output 1 is the name of the device the VPS unit will be controlling. CLICK THE SAVE BUTTON ONCE THIS INFORMATION HAS BEEN ENTERED
| P a g e 11
4. VPS Main Screen.
CUSTOM TITLE BAR
CALL BUTTON
PIN CODE
Main Screen
On the main screen, you can find:
CALL BUTTON: There are two options to call:
· Enter the apartment number and press the bell icon, it will call to all residents of that apartment.
· Click on the bell icon and a new screen will open with an address book of apartments to search and call an apartment.
PIN CODE: Pin code menu allows an authorized user access code/password to open door.
CUSTOM TITLE BAR: You have the option to input a title to be prominently displayed atop the screen, whether it be an address, building name, or any other desired identifier.
Screen Saver: In the screen saver you can add a caption such as a company name, address, etc. which will be displayed in the screen saver. The screen saver comes into action when the VPS does not detect user activity for a specified period of time (prevents damage to the screen and saves energy).
| P a g e 12
Important Information: 1. The installation of the VPS must include its gasket as per mandatory requirements, The device must be installed on solid and flat surface. 2. The system works via a cellular network using 4G technology. In addition, the system's performance is dependent on the existence of coverage by the cellular network. Pal Electronics Systems Ltd. is not responsible for non-coverage of the cellular network. The customer is responsible for ensuring that there is cellular network reception using 4G technology. 3. Please ensure the VPS is kept clear of magnetic fields, high temperatures, and moisture-prone environments. 4. Installation must be done by professionals. 5. Please do not disassemble the VPS without professional instruction. 6. The Manual is for reference only. If there is inconsistency between the Manual and the actual product, the actual product shall prevail. 7. As the device user or data controller, you may collect personal data of others such as face, license plate number, email address, phone number, and all. You must comply with local privacy protection laws.
| P a g e 13
Microsoft Word for Microsoft 365