Leuchten Direkt 996311 Pendant Light Installation Guide

Open the terminal block cover. Ensure all connections are ready for wiring.

Mark the ceiling for mounting. Drill holes at the marked points and insert the provided wall plugs. The diagram indicates a 6 unit spacing between holes.

Secure the mounting bracket to the ceiling using the provided screws.

Connect the electrical wires to the terminal block. The wires are typically identified as:

• a: Ground wire (symbol: ⏚)
• b: Neutral wire (N)
• c: Live wire (L)

Insert the stripped ends of the wires into the corresponding terminals (a, b, c) and tighten the screws securely using a screwdriver.

Attach the main body of the pendant light to the mounting bracket and secure it. Adjust the rope to the desired hanging height, using the knot as shown in the diagram for support if necessary.

Screw in the E27 LED bulb (maximum 15W) into the socket.

Ensure all wiring connections in the terminal block are secure and the cover is properly closed.