Instructions for TEMPSENSE models including: TMP-117833, TMP117833, 2AMU2-TMP-117833, 2AMU2TMP117833, 833, Hosts BLE Circuitry Temperature Sensor, 833 Hosts, BLE Circuitry Temperature Sensor, 833 Hosts BLE Circuitry Temperature Sensor

User manual

B Medical Systems S.a r.l. TMP-117833 TMP - 117 - 833 2AMU2-TMP-117833 2AMU2TMP117833 tmp 117833

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 5 Pages, 185.41KB

 Detailed Specificati n
TempSense 833
Specifications Sheet
Constructed using industrial plastics. TempSense 833 hosts. BLE circuitry, Temperature Sensor and the batteries. The batteries survive the sensor for 5 years.

Detailed Specification

  Item Name Descripti n Specicati ns

Physical Battery

Material Dimension
Battery Cells Battery Capacity I Cell
Battery Voltage Battery Chemistry
Battery Storage Temperature

ABS 70mm (L) by 28mm (W) by 08mm (H) 02 354mAh
3V LiMN02 Room Temperature

 Detailed Specificati n

  Item Name Descripti n Specificati ns

Temperature Sensor

Type Acc uracy

TempSense 810

Operating Temperature
Grading

Certification

Digital
· 0.1°( (maximum) from-20C to 50C
· 0.15C (maximum) from-40 C to 70C
· 0.2°( (maximum) from-40C to 100C
· 0.25C (maximum) from-SSC to 12SC -40°C to +asC
Medical Grade ASTM El112 and 15080601 -2-S6
NIST Traceable. 150/IEC 1702S

c nstruction

<- - - - · QR Code - ldentier

 QR c de that uniquely identies

v
 a ` B a 

WLa

e a



the TempSense 833. The QR code
 is used f r pairing the TempSense833
with the GT Mini

Dual batteries with chemistry of

LiMN04 that survive a vast temperature

range of -40C to +125C

Sensing Tip
Stainless steel-based sensing tip that can measure the air temperature or touch based teperature.
Constructed using industrial plastics, TempSense 833 hosts, BLE circuitry. Temperature Sensor and the batteries. The batteries survive the
sensor for 5 years.

FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.