User Manual for C G models including: TME116-66 Weatherproof Electronic Timer, TME116-66, Weatherproof Electronic Timer, Electronic Timer, Timer

View Manual

TME116-66 Weatherproof Electronic Timer IP66 - Smart Energy Control

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 347.34KB

Document Document

TME116-66 Weekly Programmable Timer

Features
· LCD Display · IP66 Protection Rating · 28 ON/OFF Programs · Minimum Time Setting: 1 Minute · Manual Override Feature · Weekly Auto Time Correction

Specifications

· 240V AC

· Maximum Switchable Current: 16(8)A

· Power Consumption: 0.1VA

· Minimum Interval: 1 Minute

· Changeover Switching Contacts

· Maximum Time Setting: 168 Hours

· Lithium Backup Battery

· Ambient Temp:

-10~+40°C

· Ambient Humidity: 35~85%RH

· Service Life:

i. Mechanical

107

ii. Electronic

105

· Size: 101 x 101 x 101mm

· Conduit Entries:

2 x 25mm, 1 x 32mm, 25/32mm Threaded

Adaptors

Legend

P D+ H+ M+
C MANUAL
C/R

Timer Day Hour Minute Clock Reset Manual C/R Cancel / Recovery

Wiring Diagram

Page 1

R1.0

Diagram

4. Manual Override 4.1. To enter the manual override mode press and hold the `Manual' button for 5 seconds. The screen will turn off indicating the electronic controller is shut down. 4.2. Press the `Manual' button for 5 seconds to exit the manual override mode. The display will return to previous settings.

Programming Instructions
1. Setting Clock Time 1.1. Press and hold the clock button and use the `D+/H+/M+' buttons to change the day and time accordingly.
2. Setting a Program 2.1. Press the `P' button to enter the `Program' mode. Each time the `P' button is pressed, the display will cycle through individual ON/OFF programs. 2.2. Use the `D+/H+/M+' button to set each required programs day, ON time and OFF time. 2.3. Press the `Clock' button at any time to exit the program setting mode.
NOTE: Time Setting Errors E1 - A program has not had a start time set E2 - A program has not had an end time set
3. Display Lock 3.1. Press the `Clock' button 4 times to lock the display. Press 4 times again to unlock the display. 3.2. Long press `C/R' button at any time to exit the program setting mode.

For more information, please scan the QR code below to visit our website

TME116-66 Weekly Programmable Timer