JBL Spinner BT Bluetooth Turntable

What's in the Box

The following items are included:

• 1. Platter Matt
• 2. Platter
• 3. Headshell and Cartridge
• 4. 2x Dust Cover Hinges
• 5. Single Adaptor (for 45 RPM records)
• 6. Counterweight
• 7. Interconnect Cable
• 8. Belt (pre-fitted to platter)
• 9. Power Supply (plug type varies by region)

Assembly

1. Fit the platter

   Place the platter onto the central spindle of the turntable base.

2. Fit the belt

   Loop the drive belt around the motor pulley and then around the inner rim of the platter.

3. Fit the platter matt

   Place the platter matt on top of the platter.

4. Fit the Headshell

   Attach the headshell, which contains the cartridge, to the tonearm.

5. Fit the Counterweight

   Screw the counterweight onto the rear end of the tonearm.

6. Fit the dust cover

   Insert the hinges into the rear of the turntable base and then attach the dust cover to the hinges.

Balance the Tonearm

Follow these steps carefully to balance the tonearm:

1. Remove the stylus cover. Be cautious around the needle.
2. Ensure the Anti-Skate dial is set to 0.
3. Unclip the tonearm from its rest.
4. Ensure the arm lift lever is in the down position.
5. Rotate the counterweight until the tonearm floats horizontally. It should not drift upwards or downwards.
6. With the tonearm floating, set the counterweight dial to 0 at the top. Be careful not to move the counterweight itself.
7. With the dial at 0, rotate the counterweight one full turn anti-clockwise (moving the weight closer to the cartridge).
8. Set the Anti-Skate dial to 3.

Connections on the Rear Panel

• 1. Analog Outputs: RCA connectors for connecting to an amplifier or active speakers.
• 2. Pre-amp Off/On Switch: Turn off when connecting to an amplifier's dedicated Phono input.
• 3. Bluetooth Button: Used for pairing and managing Bluetooth connections.
• 4. Auto Start/Stop Button: Enables or disables the automatic start and stop function of the platter.
• 5. Power Inlet: Connect the power supply here.
• 6. Power Switch: Main power on/off.

Bluetooth Pairing

The JBL Spinner BT supports Bluetooth 5.3 with A2DP 1.4 and AVRCP 1.6.2 profiles, operating in the 2.4~2.4835 GHz frequency range with a maximum transmitting power of < 2.0 dBm (EIRP).

LED Indicator Status:

• Pairing Mode: Press and hold the Bluetooth button for 2 seconds. The LED will flash blue.
• Connected: The LED will be solid blue.
• Reconnect: Tap the Bluetooth button. The LED will flash blue while connecting.
• Clear Pairing Record: Press and hold the Bluetooth button for 10 seconds.

Playing Records

1. Remove the stylus cover.
2. Place your record on the platter. Avoid touching the playing surface.
3. Unclip the tonearm from its rest.
4. Raise the arm lift lever.
5. Move the tonearm so the cartridge is positioned over the start of the record.
6. Start the platter. Select 33 RPM for LPs or 45 RPM for EPs and singles as required.
7. Lower the arm lift lever. The tonearm will gently lower onto the record.

JBL Spinner BT Bluetooth Turntable

Experience an instant connection to your vinyl collection with the JBL Spinner BT. This Bluetooth turntable allows you to play your records and stream audio wirelessly to any Bluetooth speaker or headphones. Utilizing aptX™ HD encoding, it ensures no sonic compromise, delivering sound quality as good as a wired connection. The Spinner BT also features analog outputs for traditional Hi-Fi systems and a built-in phono preamp for use with active speakers. Constructed with an aluminum platter and tonearm, it embodies the joy of music and vinyl.

Key Features:

• Bluetooth connectivity with aptX™ HD for high-quality wireless audio.
• Vibrant design with colorful accents.
• High-quality record playing components.
• Removable headshell for easy cartridge replacement or upgrades.
• Aluminum platter with a reliable belt drive system.
• High-quality moving magnet cartridge factory-fitted.

Features and Benefits Explained:

• Bluetooth with AptX HD™: Quickly pairs with Bluetooth speakers or headphones for an instant, high-fidelity wireless connection to your records.
• Vibrant Design: A personal statement reflecting the warmth and joy of vinyl, fostering a more intimate music listening experience.
• High-Quality Components: The aluminum tonearm ensures excellent tracking of record grooves without causing wear. The wooden plinth provides superior sound quality compared to plastic alternatives and is more sustainable.
• Removable Headshell: The headshell, where the cartridge is fitted, is removable, simplifying cartridge replacement and upgrades.
• Aluminum Platter and Belt Drive: The aluminum platter is driven by a belt drive system. An optical sensor underneath the platter ensures accurate playback speed at 33.3 RPM for albums and 45 RPM for singles.
• High-quality moving magnet cartridge pre-installed: The JBL Spinner BT is ready to use out of the box with a pre-installed and aligned moving magnet cartridge.

Specifications

Important Safety Instructions

Please read and follow these instructions carefully:

1. Read all instructions before use.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
7. Do not install near heat sources like radiators, heat registers, stoves, or other apparatus that produce heat.
8. Do not defeat the safety purpose of polarized or grounding-type plugs. If the provided plug does not fit your outlet, consult an electrician.
9. Protect the power cord from being walked on or pinched, especially at plugs and where it exits the apparatus.
10. Use only attachments/accessories specified by the manufacturer.
11. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. [electrical safety symbol]
12. Unplug this apparatus during lightning storms or when unused for long periods.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged, such as by a damaged power cord or plug, liquid spillage, objects falling into the apparatus, exposure to rain or moisture, failure to operate normally, or being dropped.
14. To completely disconnect from AC mains, disconnect the power-supply cord plug from the AC receptacle.
15. The mains plug of the power-supply cord shall remain readily operable.
16. This apparatus is intended to be used only with the power supply and/or charging cable provided by the manufacturer.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

Symbol Explanation:

• [Dangerous Voltage Symbol]: This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock.
• [Important Instructions Symbol]: This symbol on the product means there are important operating and maintenance instructions in this guide.

FCC and IC Statements (USA and Canada):

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-003(B)/NMB-003(B).

FCC Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, users are encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician.

Caution: Changes or modifications not expressly approved by HARMAN could void the user's authority to operate the equipment.

FCC/IC Radiation Exposure Statement: This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body. For products transmitting RF energy, this equipment is designed to meet the requirements for exposure to radio waves established by the FCC and ISED. The highest SAR value reported during product certification for body-worn use meets these guidelines.

RF Exposure Guidelines for 5GHz Band: For operation in the 5.150-5.250 MHz band, use is restricted to indoor locations to reduce potential interference with mobile satellite systems. For devices operating in 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands, high power radars are primary users and may cause interference. No configuration controls are provided for changing frequency outside FCC authorization.

EU/UK Use Restriction: In the European Union, operation is limited to indoor use within the 5150-5350 MHz band.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment):

This symbol [WEEE Symbol] means the product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. Contact your local municipality, disposal service, or retailer for more information.

This product is RoHS compliant and in compliance with Directive 2011/65/EU and UK Regulations 2012 regarding hazardous substances.

REACH Compliance:

This product contains lead (CAS No. 7439-92-1) in a concentration of more than 0.1% by weight. At the time of release, no other substances from the REACH candidate list were present in concentrations above 0.1% by weight.

Warnings and Cautions:

• Headphones: Do not use headphones at high volume for extended periods to avoid hearing damage. Use headphones at a comfortable, moderate volume. Turn the volume down before placing headphones on, then gradually increase to a comfortable level.
• Products with Batteries: To remove batteries, reverse the insertion procedure. For built-in batteries, recycling centers handle dismantling. Battery replacement must be done by authorized service centers. Do not dispose of batteries with household trash; dispose of them in an environmentally sound manner.
• Battery Replacement Warning: Danger of explosion if battery is incorrectly replaced. Do not disassemble, crush, puncture, short external contacts, expose to high temperatures (above 60°C/140°F), sunlight, extreme low air pressure, or dispose of in fire or water. Replace only with specified batteries. [Separate Collection Symbol]
• Coin/Button Cell Batteries: WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. This product contains a coin/button cell battery. If swallowed, it can cause severe internal burns in 2 hours and lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. Seek immediate medical attention if batteries are suspected to have been swallowed or placed inside any part of the body.

Wireless Operation Compliance: HARMAN International declares this equipment complies with essential requirements and provisions of Directive 2014/53/EU and UK Radio Equipment Regulations 2017. The declaration of conformity can be found on www.jbl.com/specialtyaudio.