Right Controller for Nintendo Switch

Getting Started

Please read this guide carefully before using the controller. Reading this guide will help you learn how to use the controller properly. Keep this guide in a safe place for future use.

Product Description

The right controller for the Nintendo Switch features the following buttons and indicators:

• [1] R button
• [2] + button
• [3] A/B/X/Y buttons
• [4] Right stick
• [5] HOME button
• [6] Charging port
• [7] ZR button
• [8] Release button
• [9] SR button
• [10] LED player indicators
• [11] Mode button
• [12] SL button
• [13] Reset button (recessed)

Diagrams show the layout of these buttons on the controller.

How to Differentiate Controllers

The left controller has a [-] button at the top right, while the right controller has a [+] button at the top left.

Left controller with [-]

Right controller with [+]

First Wireless Connection

1. Console Settings

Bluetooth connection must be enabled. Turn on the console, go to the 'Console Settings' menu, select 'Flight Mode' and ensure it is set to 'Off'. Also, ensure 'Communication with controllers (Bluetooth)' is enabled; if not, enable it.

2. Connecting to the Console

In the 'Home' menu, select 'Controllers', then 'Change grip/order'. Press and hold the [Mode button] (11) on either the left or right controller for 3 seconds. The LED will flash rapidly, entering Bluetooth sync mode. Once both controllers appear on screen, follow the on-screen instructions. Your controllers are now synchronized and working.

How to Connect the Controller

Console Mode

Slide the controller down into the console rail until you hear a click. Ensure it is correctly oriented and fully inserted.

Diagram shows sliding the controller into the console rail.

How to Charge the Controllers

USB Charging Only:

Connect the controllers to a [Type-C] cable. The 4 [LED player indicators] [10] will flash slowly during charging. Once charging is complete, all 4 LEDs will turn off.

Important: When controllers are charging, do not connect them to the console to avoid potential damage.

Diagram shows a [Type-C] cable connected to the controller's [Charging port].

How to Reconnect the Controller

Activation

To activate the controllers, press one of the directional buttons (UP/DOWN/LEFT/RIGHT) on the left controller or the [A button]/[B button]/[X button]/[Y button] on the right controller. Once connected, the LEDs will remain steady.

Deactivation

To deactivate the controllers, press and hold the [Mode button] (11) for 3 seconds.

Stand-by Mode

Controllers will automatically enter Stand-by mode if they do not detect a compatible device during the connection procedure or if they are not used for 5 minutes.

Switch Sports Game Update

This section applies only when using the 'Switch Sports' game.

1. Connect the controller and the Switch console.
2. Launch the 'Switch Sports' game.
3. Select a sport.
4. The console will display a message indicating the controller needs an update. Click 'OK'.
5. An update will begin. The controller may briefly interrupt the update and then reconnect.
6. Click 'OK' again; the controller is now ready to play.

Note: The 'Switch Sports' game contains 6 mini-games. You may need to repeat this update process when switching between mini-games.

Technical Specifications

Safety Warnings

• Use only the supplied [Type-C] charging cable.
• If you hear suspicious sounds, see smoke, or smell a strange odor, stop using the product immediately.
• Do not expose the product or its battery to microwaves, high temperatures, or direct sunlight.
• Avoid contact with liquids. Do not handle with wet or greasy hands. If liquid enters the product, stop using it.
• Do not subject the product or battery to excessive force. Do not pull or sharply bend the cable.
• Do not touch the product while it is charging during a thunderstorm.
• Keep the product and packaging out of reach of young children. Packaging elements can be ingested, and the cable can wrap around necks.
• Individuals with finger, hand, or arm injuries or problems should not use the vibration function.
• Do not attempt to disassemble or repair the product or battery. If damaged, stop using it.
• If the product is dirty, wipe it with a soft, dry cloth. Avoid using thinner, benzene, or alcohol.

Software Update

If Nintendo releases system updates in the future, your controllers may require an update. Visit www.freaksandgeeks.fr and navigate to the product page to download the necessary driver.

Important: If your controllers are working correctly with your console, DO NOT update them, as this may cause system confusion.