Demolition Hammer Instruction Manual
Models: HM0871C, HM0870C
▲WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Specifications
| Model | HM0871C | HM0870C |
|---|---|---|
| Blows per minute | 1,100 - 2,650 min⁻¹ | |
| Overall length | 466 mm | 449 mm |
| Net weight | 5.6 kg | 5.1 kg |
| Safety class | ⎕II (Double Insulation) | |
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use.
? Read instruction manual.
⎕II DOUBLE INSULATION
♻ Only for EU countries: Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Intended Use
The tool is intended for chiselling work in concrete, brick, stone and asphalt as well as for driving and compacting with appropriate accessories.
Power Supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire.
Noise and Vibration Data
For Model HM0871C
Noise
The typical A-weighted noise level determined according to EN60745:
- Sound pressure level (LPA) : 86 dB(A)
- Sound power level (LWA): 97 dB(A)
- Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined according to EN60745:
- Work mode: chiseling function with side handle
Vibration emission (ah,Cheq) : 8.0 m/s²
Uncertainty (K) : 1.5 m/s² - Work mode: chiseling function with side grip
Vibration emission (ah,Cheq) : 8.0 m/s²
Uncertainty (K) : 2.0 m/s²
For Model HM0870C
Noise
The typical A-weighted noise level determined according to EN60745:
- Sound pressure level (LPA) : 87 dB(A)
- Sound power level (LWA): 98 dB(A)
- Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined according to EN60745:
- Work mode: chiseling function with side handle
Vibration emission (ah,Cheq) : 11.0 m/s²
Uncertainty (K) : 1.5 m/s² - Work mode: chiseling function with side grip
Vibration emission (ah,Cheq) : 11.5 m/s²
Uncertainty (K) : 1.5 m/s²
EC Declaration of Conformity (For European countries only)
Makita Corporation, as the responsible manufacturer, declares that the Demolition Hammer models HM0871C and HM0870C are of series production and conform to the following European Directives:
- 98/37/EC until 28th December 2009
- 2006/42/EC from 29th December 2009
These models are manufactured in accordance with the standard EN60745.
The technical documentation is kept by Makita International Europe Ltd, Michigan, Drive, Tongwell, Milton Keynes, MK15 8JD, England.
Signed: Tomoyasu Kato, Director, Makita Corporation, 3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN (24th April 2009)
General Power Tool Safety Warnings
▲WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term
Related Documents
 |
Makita Demolition Hammer HM0871C HM0870C Instruction Manual Comprehensive instruction manual for Makita HM0871C and HM0870C Demolition Hammers, covering specifications, safety warnings, operation, maintenance, and accessories for chiseling concrete, brick, stone, and asphalt. |
 |
Makita HM0871C & HM0870C Demolition Hammer Instruction Manual Comprehensive instruction manual for the Makita HM0871C and HM0870C demolition hammers, covering specifications, safety warnings, operation, maintenance, and accessories. Essential guide for proper use and care. |
 |
Makita Demolition Hammer HM0871C HM0870C Instruction Manual Comprehensive instruction manual for the Makita Demolition Hammer models HM0871C and HM0870C, covering specifications, safety warnings, operation, maintenance, and accessories. |
 |
Makita HM0871C HM0870C Demolition Hammer Instruction Manual Comprehensive instruction manual for Makita HM0871C and HM0870C demolition hammers, covering specifications, safety warnings, operation, assembly, maintenance, and accessories. Essential guide for safe and effective use. |
 |
Makita HM0871C HM0870C Demolition Hammer Instruction Manual Comprehensive instruction manual for Makita HM0871C and HM0870C Demolition Hammers, covering detailed specifications, safety warnings, operational procedures, maintenance guidelines, and recommended accessories. Essential for safe and efficient use. |
 |
Makita HM0871C HM0870C Demolition Hammer Instruction Manual Comprehensive instruction manual for Makita HM0871C and HM0870C demolition hammers, covering specifications, safety warnings, operation, maintenance, and optional accessories for efficient concrete, brick, stone, and asphalt chiseling. |
 |
Makita HM0871C HM0870C Demolition Hammer Instruction Manual Comprehensive instruction manual for Makita HM0871C and HM0870C demolition hammers, covering specifications, safety, operation, assembly, maintenance, and accessories. |
 |
Makita HM0871C & HM0870C Demolition Hammer Instruction Manual This manual provides detailed instructions, safety warnings, specifications, and maintenance guidelines for the Makita HM0871C and HM0870C Demolition Hammers. |