Mooka M200L Air Purifier User Manual
High Clean Air Delivery Rate
3-Stage Filtration System
Low Noise Level
Child Lock
Optional Light
ECO Mode
Customer Service
Our customer service team is standing by to assist you if you have any questions or concerns.
Unplug or disconnect the appliance from the power supply before servicing.
WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device.
WARNING: To Reduce The Risk Of Fire, Electric Shock Or Injury To Persons, Do Not Use Replacement Parts That Have Not Been Recommended By The Manufacturer (e.g. Parts Made At Home Using A 3D Printer)
1-855-666-9955
Important Safeguards
In order to prevent harm or damage happened to users or others, be sure to comply with the requirement as below:
WARNING: It reminds that misusing or mishandling may cause death.
ATTENTION: It reminds that misusing or mishandling may cause hurt.
[Forbidden Symbol] FORBID
[Exclamation Symbol] FORCE
WARNING: Please supervise your children and prevent them from touching or using machine.
[Wet Hands Symbol] AVOID WET: Do not connect or disconnect the power with wet hands. It may cause electrical shocking.
[Screwdriver Symbol] NO DISASSEMBLE: Do not disassemble, repair or reconstruct. It may cause fire or damage. Please contact customer support for replacement.
[Forbidden Symbol] FORBID: Do not use over-limit sockets or wiring connectors. Please use the rated voltage. It may cause a fire.
[Water Droplets Symbol] AVOID WET: Avoid any water on the surface of the unit. It may cause short circuit or electrical shocking.
WARNING: Before cleaning or performing maintenance, always disconnect the appliance from the power supply. Otherwise, the unit may suddenly start operating, which could result in electric shock or injury.
[Forbidden Symbol] POWERFORBID: Do not insert any metal objects into the unit. It may cause hurt or electric shocking.
[Forbidden Symbol] FORBID: Do not repair it when the cord or plug is damaged. It may cause short circuit, electric shocking or fire. Please contact customer support for replacement.
Dust on the plug can weaken insulation and potentially cause a fire. Unplug the device and clean the plug with a dry cloth. If the device will not be used for an extended period, remove the plug from the socket.
ATTENTION: Do not use in a room with a gas stove, as the machine is not a ventilator and may cause injury.
[Fire Symbol] Do not place the unit near fires. It may cause fire.
[Bathroom Symbol] Do not use in humid or high-temperature environments such as bathrooms. Otherwise, it may cause electric leakage, electric shock, or fire.
[Plug Symbol] Please hold the plug instead of the cord when unplugging the device. Otherwise, it may cause a short circuit, damage to the cord, electric shock, or fire.
Keep away from alcohol, organic impregnant. It may cause cracking, short circuit, electric shock, injury or fire.
Please ventilate timely when used with fire in the room.
Unplug the device immediately if any of the following conditions occur:
- Switches not working
- Overheating of the power cord or plug
- Unusual smells, noises, or vibrations
- Any other signs of malfunction
If the power cord is damaged, contact the customer service. Do not attempt to repair it yourself.
Before servicing, ensure the appliance is unplugged or disconnected from the power supply.
WARNING: Do not use this fan with solid-state speed control devices to avoid fire or electric shock risks.
WARNING: Use only manufacturer-recommended replacement parts. Homemade parts, including 3D-printed components, are not safe and may cause fire, electric shock, or injury.
Product Technical Features
Purification Technologies
The multi-functional filter includes a pre-filter, HEPA layer, and activated carbon layer for comprehensive air purification.
Air Purification Process
Polluted air → Pre-filter → HEPA filter → Activated carbon filter → Fresh air
Product Overview
Appearance Diagram
Front View: Aromatherapy case, Air outlet, Control panel, Air inlet
Side View: Filter, Base cover, Adapter storage, Main body
Control Panel Diagram
The control panel includes the following buttons and indicators:
- Child Lock Button [Lock Symbol]
- Timer Button [Timer Symbol]
- Filter Reset Button [Reset Symbol]
- ECO Mode Button [ECO Symbol]
- Night Light Button [Light Symbol]
- Power ON/OFF Button [Power Symbol]
- Timing Display: 2H, 4H, 6H, 8H
- Fan Speed Indicator: Low, Mid, High, Sleep
Operating Instructions
Placement
- Ensure the appliance is placed at least 30cm away from walls or furniture. Avoid placing it under objects that may block the airflow.
- Avoid placing the appliance near heat sources.
Filter Replacement
Replace the filter and reset the indicator. After 1440 hours of operation, the filter replacement indicator will light up. Replace the filter with a new one, then press and hold the reset button for 3 seconds to reset the filter's lifetime counter. The indicator will turn off.
Power Connection
DC Voltage: 100-240V 50/60Hz
Before connecting the appliance, ensure the voltage indicated on the device matches the local power supply. Do not connect to an incorrect voltage.
Diagram showing the machine socket and adapter connection.
Filter Removal
Turn off and unplug the appliance, then turn it upside down. Open the bottom cover and remove the filter.
Filter Installation
Remove the protective film from the new filter before installation. Close the bottom cover securely after installing the filter.
Diagram showing filter removal and installation.
Aroma Function
The aroma tray on the top air outlet includes a replaceable aroma pad. Add a few drops of essential oil (not included) to create a fresh and relaxing atmosphere.
Power Settings
When powered on, all display lights activate for a self-check. After the self-check, the lights turn off, and the machine enters standby mode.
In standby mode, touch the top power switch to turn on the device. The fan starts at low speed by default, and the night light turns on. Touch the switch again to turn off the device and return to standby mode.
Standby Mode: Shows the control panel icons in standby.
Self-check State: Shows the control panel icons during self-check.
Instructions for Use
Child Lock
Press and hold the LOCK button for 3 seconds to enable child lock. The child lock light will turn on, and all buttons will be locked. Hold the LOCK button again for 3 seconds to disable child lock and restore normal button functions.
Child Lock On: Shows the control panel with child lock enabled.
Child Lock Off: Shows the control panel with child lock disabled.
Fan Speed
In sleep mode, the indicator light is half-lighted.
Low fan speed: [Fan Symbol] with indicator lights showing low speed.
Medium fan speed: [Fan Symbol] with indicator lights showing medium speed.
High fan speed: [Fan Symbol] with indicator lights showing high speed.
Enter into sleep mode: [Fan Symbol] with sleep mode indicator.
Timer
Touch the timer button to set the timer.
Time Setting for 2 Hours: Shows timer set for 2 hours.
Time Setting for 4 Hours: Shows timer set for 4 hours.
Time Setting for 6 Hours: Shows timer set for 6 hours.
Time Setting for 8 Hours: Shows timer set for 8 hours.
Filter Replacement Indicator
The filter replacement indicator light will illuminate after 1440 hours of use. Remove the new filter's plastic bag and install it properly. Hold the filter reminder button for 3 seconds to reset it.
The indicator light is on: Shows the control panel with the filter replacement indicator on.
Ambient Light
Press this button to control the ambient light. The optional night light creates a calming, multi-sensory effect for relaxation.
Lights on: Shows the control panel with ambient light on.
Lights off: Shows the control panel with ambient light off.
ECO Mode
Tap the button to turn the ECO mode on/off. The unit will operate at low speed. It will run for 30 min, stop automatically, wait for 30 min, and then run again automatically, following this regular cycle. It'll be more energy efficient in ECO mode.
Reminder: When ECO mode is activated, the night light will automatically turn off to save energy. You can manually turn it back on if needed.
ECO mode on: Shows the control panel with ECO mode activated.
Diagram illustrating the ECO mode cycle: Fan On → Fresh Air (30 min) → Fan Off → Air Pollution (30 min) → Fan On.
Troubleshooting
| Problem | Checking methods | Possible solution |
|---|---|---|
| No Power Adapter | Please check the bottom of the device for a small space containing the adapter. | If the adapter is not included in the package, do not return it. Contact customer service for support. |
| Do not work | Please check if the plug is unplugged. | Please ensure the plug is properly connected. |
| Odor can not be removed | Is there a strong odor in the room? (Note: Run the purifier continuously.) Has the filter reached the end of its lifespan? |
It is recommended to ventilate the room before operating the machine. Please replace the old-filter with a new one. |
| High noise | Is the filter's PE bag still on? Has the filter reached the end of its lifespan? |
Please take out filter and tear off PE bag. Please replace the old-filter with a new one. |
| This air purifier stops suddenly during operation | In ECO mode, it will run for 30 min, stops automatically, waits for 30 min and then runs again automatically, following this regular cycle. If a timer is set, the machine will automatically stop when the timer expires. Can't turn it on again |
This is normal. It'll be more energy efficient. This is normal. Please contact our customer service for support. |
NOTE: If the issue persists after following the above steps, please contact our customer service for support.
Technical Specifications
Unit Specifications
| Model No. | Power supply | Net Weight | Noise level (dB) | Power consumption (W) | Dimensions (wxdxh) |
|---|---|---|---|---|---|
| M200L | DC 100V-240V 50/60Hz | 3.2KG | 15-50dB | 24W | 305x154x398 (mm) |
Filter Specifications
| Size | Life time |
|---|---|
| 244x39x323 (mm) | 1440H |
