Support – Pegasus Astro
Installation Guide for PEGUSUSASTRO models including: PEG-PRDG-FOCUSER, PRODIGY Microfocuser, PEG-PRDG-FOCUSER PRODIGY Microfocuser
PRODIGY Microfocuser – Pegasus Astro
Device is covered by two (2) years warranty Designed and Assembled in Greece For any questions and support please contact: info@pegasusastro.com
Pegasus Astro Prodigy Microfocuser | First Light Optics
File Info : application/pdf, 2 Pages, 390.55KB
DocumentDocumentQUICK INSTALLATION GUIDE Thank you for choosing our product Prodigy Microfocuser is a robust 3-inch robotic focuser which allows you to precisely and remotely control the focus of your telescope setup. Its sturdy mechanical design ensures that Prodigy Microfocuser can lift up to 10Kg of equipment, dead accurate and flexure free. Focuser has a 25mm of draw tube travel and a clear aperture of 76mm / 3-inch. Focuser's drawtube accepts different types of optional telescope adapters such as Celestron SCT Edge, RC telescopes, and refractors. Prodigy houses 2 x USB2 switchable ports and 2 x 12V switchable power outputs that provide electric "juice" to your equipment close to the focuser (e.g Filter Wheel, Guiding camera etc). Operating Instructions: · Plug the temperature sensor into the "Sensor" socket. · Plug the USB cable into the "PC" socket. · Plug any USB2 device into the dual-stacked USB2 Ports. The same applies to the 2 x 12V Outputs. · Plug the power cable into the "12V DC IN" socket. · The device will boot and after three seconds is going to be fully operational. · Download USB drivers, standalone software or ASCOM drivers from pegasusastro.com/support in order to connect to the device. Device is covered by two (2) years warranty Designed and Assembled in Greece For any questions and support please contact: info@pegasusastro.com What is in the box: · Prodigy Microfocuser · M54 Male to M54 Male Adapter (PEG-ADAPT-M54M-M54M) · M54 Male to M48 Male Adapter (PEG-ADAPT-M54M-M48M) · Temperature Sensor (0.6m) · USB type B Cable (1.8m) · 2 x USB2 type B cable (0.5m) · 2 x 2.1mm Power cable (0.5m) · 4 x M4 x 16mm screws for telescope adapter Optional Accessories: · EZY Focus Hand Controller Observer's Hint: Order the optional EZY Focus Hand Controller and focus, vibration-free, your telescope using the digital knob. Device is covered by two (2) years warranty Designed and Assembled in Greece For any questions and support please contact: info@pegasusastro.com